Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The 0410 2.2uH color ring DIP inductor is a through-hole component with 10% tolerance and 0.75A current rating. Its epoxy coating resists humidity, making it suitable for various electronic applications.

Key Highlights

  • 2.2uH inductance with 10% tolerance for accurate circuits
  • 0.75A current rating supports moderate power designs
  • Through-hole mounting with bendable leads for easy PCB insertion
  • Epoxy resin coating enhances humidity resistance
  • Compact 10mm length and 4mm body diameter
  • Operating temperature range of -40°C to 85°C

Ideal For

  • Electronics hobbyists and DIY enthusiasts
  • PCB designers needing through-hole inductors
  • Repair technicians working on consumer electronics
  • Students learning about inductive components
  • Makers building communication or audio devices

Buying Tip

Verify the inductor's physical size and lead spacing fit your PCB layout, and ensure the 0.75A current rating exceeds your circuit's expected current.

Elecvora expert review

Our verdict

The 0410 2.2uH DIP inductor is a solid choice for general-purpose through-hole applications where a compact, humidity-resistant component is needed. Its specifications are well-suited for low-power circuits and prototyping.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact and lightweight design
  • Humidity-resistant epoxy coating
  • Bendable leads for easy PCB insertion
  • RoHS compliant

Cons

  • Limited current rating may not suit high-power applications
  • Self-resonant frequency of 0.796MHz restricts high-frequency use

Best for

Low-power electronic circuits and prototyping

Not ideal for

High-current or high-frequency applications

Specifications

ManufacturerGeneric
Inductance2.2uH
Tolerance (%)10
Mounting TypeThrough Hole
Current Rating (A)0.75
Frequency (Hz)0.796M
Operating Temperature (°C)-40 to 85
Length (mm)10
Width (mm)4 (Body Diameter)
Weight (g)3
Case/Package:0410
DC Resistance(mΩ) at 20°C240
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 0410 2.2uH 0.5W Color Ring DIP Inductor

Frequently Asked Questions

What is the inductance value of this inductor?
The inductor has a nominal inductance of 2.2uH with a tolerance of ±10%.
Can this inductor be used in high-temperature environments?
It is rated for operating temperatures from -40°C to 85°C, so it can be used in most standard environments within that range.
Is this inductor RoHS compliant?
Yes, it is RoHS compliant, meeting restrictions on hazardous substances.
What is the maximum current this inductor can handle?
The current rating is 0.75A, which is the maximum continuous current it can handle without exceeding its temperature limits.
How many inductors are included in the package?
The package includes one inductor.
What is the self-resonant frequency and why does it matter?
The self-resonant frequency is 0.796MHz. Above this frequency, the inductor behaves capacitively, so it should be used below this frequency for inductive applications.

Overview

The 0410 2.2uH color ring DIP inductor is a fixed-value, through-hole component built for dependable performance in a variety of electronic circuits. Its compact size and lightweight construction make it a practical choice for space-sensitive designs, while the color ring marking allows for quick identification of inductance value. The inductor features an epoxy resin coating that provides resistance to humidity, helping to maintain stability over time.

Key Features

  • 2.2uH inductance with 10% tolerance for predictable circuit behavior
  • 0.75A current rating to handle moderate current loads
  • Through-hole mounting with long leads that can be bent for automated insertion
  • Epoxy resin coating for improved humidity resistance
  • Compact dimensions: 10mm length, 4mm body diameter, and 3g weight
  • Wide operating temperature range from -40°C to 85°C

Specifications Explained

The 2.2uH inductance indicates the amount of energy the inductor can store in its magnetic field. With a 10% tolerance, the actual inductance may vary by ±10%, which is suitable for many general-purpose filtering and tuning applications. The 0.75A current rating specifies the maximum continuous current the inductor can handle without significant performance degradation. The DC resistance (DCR) of 240mΩ at 20°C contributes to power loss; lower DCR is generally better for efficiency. The self-resonant frequency of 0.796MHz is the frequency at which the inductor's parasitic capacitance resonates with its inductance, so it should be operated below this frequency for inductive behavior. The 0410 case size refers to the body dimensions (approximately 4mm diameter and 10mm length), making it compatible with standard through-hole PCB layouts.

Compatibility and Requirements

This inductor is designed for through-hole mounting, so it requires a PCB with appropriate holes and soldering equipment. It is RoHS compliant, meaning it meets restrictions on hazardous substances. No additional components are required for its basic function, but it should be used within the specified operating temperature range of -40°C to 85°C and below its self-resonant frequency for optimal performance.

Typical Uses

Common applications include consumer electronics, communication equipment, computer devices, televisions, VCRs, radios, and other electronic products where a fixed inductor is needed. It is also suitable for prototyping and educational projects.

What's in the Box

Package includes: 1 x 0410 2.2uH 0.5W Color Ring DIP Inductor.

Quick specs

Manufacturer
Generic
Inductance
2.2uH
Tolerance (%)
10
Mounting Type
Through Hole
Current Rating (A)
0.75
Frequency (Hz)
0.796M
See all specifications