
1 / 4 · Click to enlarge
AI Summary
A pack of ten 0410 through-hole color ring inductors rated at 3.3uH with 10% tolerance and 0.67A current handling. The compact 10mm body with 4mm diameter fits tight PCB layouts and repair work.
Key Highlights
- 3.3uH inductance with 10% tolerance for predictable circuit behaviour
- 0.67A current rating suits low-power filtering and tuning roles
- 300mΩ DC resistance at 20°C keeps losses modest
- Compact 0410 case: 10mm length, 4mm body diameter
- Through-hole leads bend and fit standard PCB pads
- Operates from -40 to 85°C in enclosed assemblies
Ideal For
- Repair technicians replacing failed through-hole inductors
- Hobbyists building filter and tuning circuits on perfboard
- Small-batch electronics assemblers needing matched spares
- Students learning through-hole component placement and soldering
Buying Tip
Confirm your board's hole spacing and clearance for a 4mm body before ordering, since the leads can be bent but the body size cannot be changed.
Elecvora expert review
Our verdict
A straightforward through-hole inductor pack that gives you ten matched 3.3uH parts for repair and low-power filter work. The 10% tolerance and clear current and resistance figures make it easy to judge against a schematic before you commit.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Ten pieces per pack covers repairs and small builds
- Clear 3.3uH value with 10% tolerance
- Compact 0410 body fits dense boards
- Bendable through-hole leads simplify fitting
Cons
- 0.67A rating limits use to low-power positions
- No datasheet or tolerance curve included beyond the stated figures
- Color ring coding must be checked carefully by eye
Best for
Through-hole repair and low-power filtering work
Not ideal for
High-current power rails or surface-mount layouts
Specifications
| Manufacturer | Generic |
|---|---|
| Inductance | 3.3uH |
| Tolerance (%) | 10 |
| Mounting Type | Through Hole |
| Current Rating (A) | 0.67 |
| Frequency (Hz) | 25.2M |
| Operating Temperature (°C) | -40 to 85 |
| Length (mm) | 10 |
| Width (mm) | 4 (Body Diameter) |
| Weight (g) | 3 |
| Case/Package | :0410 |
| DC Resistance(mΩ) at 20°C | 300 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 10 x 0410 3.3uH 0.5W color ring DIP inductors
Frequently Asked Questions
What is the inductance of these inductors?
Can these be used on surface-mount boards?
How much current can one inductor handle?
How many inductors are included?
What temperature range do they work in?
Do the leads need to be bent before fitting?
Overview
The 0410 3.3uH color ring DIP inductor is a small through-hole component for builders, repair technicians and hobbyists who need a reliable fixed inductance on a printed circuit board. Each unit carries a 3.3uH value with 10% tolerance, so circuits that depend on a predictable inductance window can be assembled with confidence. The part is supplied in a pack of ten, which covers a repair job, a small batch build or a set of spares for the bench.
With a 0.67A current rating and 300mΩ DC resistance at 20°C, this inductor is aimed at low-power signal and filtering positions rather than high-current power rails. The 0410 case measures 10mm in length with a 4mm body diameter, and the through-hole leads can be bent to suit your board layout before soldering.
Key Features
- Fixed 3.3uH value with 10% tolerance for repeatable circuit behaviour
- 0.67A current rating suited to low-power filtering and tuning duties
- 300mΩ DC resistance at 20°C for modest conduction losses
- 25.2MHz frequency figure to help assess high-frequency behaviour
- Through-hole mounting with bendable leads for flexible PCB placement
- -40 to 85°C operating range for use in enclosed electronic assemblies
Specifications Explained
Inductance and tolerance: 3.3uH is a common value in filter and tuning networks. The 10% tolerance tells you how far each part may sit from that nominal value, which matters when several inductors work together in one circuit.
Current and resistance: The 0.67A rating is the current the part is specified to handle, and the 300mΩ DC resistance at 20°C indicates the resistance the winding presents to direct current. Lower resistance means less wasted energy as heat, but this part is still intended for low-power positions.
Frequency: The 25.2MHz figure is useful when checking whether the inductor suits the frequency range of your circuit. It is not a maximum rating, so treat it as a reference point when comparing against your design needs.
Size and mounting: The 0410 case is 10mm long with a 4mm body diameter. Through-hole leads pass through plated holes and are soldered on the reverse side, and they can be bent to match your pad spacing.
Compatibility and Requirements
These inductors are through-hole parts, so your board needs plated through-holes and space for a 4mm diameter body. Soldering equipment is required, and the leads can be shaped before insertion. The -40 to 85°C operating range should be checked against the temperature inside your enclosure. No other accessories are needed to fit the part.
Typical Uses
Typical roles include filtering and tuning in consumer electronics, communication equipment, computer peripherals, televisions, VCRs and radios. They also suit general repair work where a 3.3uH through-hole inductor has failed and needs replacement.
What's in the Box
- 10 x 0410 3.3uH 0.5W color ring DIP inductors
Quick specs
- Manufacturer
- Generic
- Inductance
- 3.3uH
- Tolerance (%)
- 10
- Mounting Type
- Through Hole
- Current Rating (A)
- 0.67
- Frequency (Hz)
- 25.2M













