Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 0410 47uH color ring DIP inductor offers 10% tolerance and a 0.34A current rating in a compact through-hole package. Its epoxy coating and long bendable leads make it easy to fit and durable in humid conditions.

Key Highlights

  • 47uH inductance with 10% tolerance for predictable circuit behaviour
  • Through-hole 0410 package with 10 mm length and 4 mm body diameter
  • 0.34A current rating and 1300 mΩ DC resistance at 20°C
  • Epoxy resin coating resists humidity for longer service life
  • Long leads can be bent for automated PCB insertion
  • RoHS compliant and rated for -40°C to 85°C operation

Ideal For

  • Electronics technicians repairing radios and televisions
  • Hobbyists building through-hole prototype boards
  • Engineering students learning about inductive components
  • Makers working on low-power communication devices

Buying Tip

Confirm that your circuit current stays below 0.34A and that the 0410 through-hole footprint matches your PCB before soldering.

Elecvora expert review

Our verdict

A straightforward through-hole inductor that delivers the stated 47uH value with reasonable tolerance and a humidity-resistant coating. It is a sensible choice for low-power filtering and tuning work where a 0.34A rating is sufficient.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 0410 package saves board space
  • Epoxy coating adds humidity resistance
  • Long leads suit bending and automated insertion
  • RoHS compliant

Cons

  • Low 0.34A current rating limits use in power circuits
  • Relatively high 1300 mΩ DC resistance causes some loss
  • No voltage rating or package contents stated in the data

Best for

Low-power through-hole filtering and tuning applications

Not ideal for

High-current power supply or surface-mount designs

Specifications

ManufacturerGeneric
Inductance47uH
Tolerance (%)10
Mounting TypeThrough Hole
Current Rating (A)0.34
Frequency (Hz)2.52M
Operating Temperature (°C)-40 to 85
Length (mm)10
Width (mm)4 (Body Diameter)
Weight (g)3
Case/Package:0410
DC Resistance(mΩ) at 20°C1300
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Frequently Asked Questions

What is the inductance value of this inductor?
The inductor is rated at 47uH with a tolerance of ±10%.
Can I use this inductor in a high-current circuit?
The current rating is 0.34A, so it is intended for low-power circuits. Higher currents may exceed the rating and cause overheating.
Is this a surface-mount or through-hole component?
It is a through-hole DIP inductor with leads that pass through plated holes in a PCB.
What is included in the package?
Package contents are not specified in the product data. Please verify the listing details before purchasing.
What is the operating temperature range?
The inductor is rated for operation between -40°C and 85°C.
How should I store this inductor?
Store it in a dry place away from excessive humidity and mechanical stress to preserve the epoxy coating and lead shape.

Overview

The 0410 47uH color ring DIP inductor is a fixed-value through-hole component for engineers, technicians and hobbyists working on compact electronic assemblies. With a 47uH inductance and 10% tolerance, it provides a stable value for filtering, tuning and low-power energy storage. The 0410 case is 10 mm long with a 4 mm body diameter, so it fits neatly into densely populated boards without taking up unnecessary space.

Key Features

  • Compact 0410 package: small footprint for tight PCB layouts.
  • Color ring identification: quick visual reading of the inductance value.
  • Epoxy resin coating: helps protect against humidity and supports long-term reliability.
  • Bendable leads: long leads can be shaped for automatic insertion equipment.
  • RoHS compliant: meets environmental requirements for lead-free electronics.

Specifications Explained

Inductance and tolerance: 47uH with ±10% means the actual value stays within a narrow band, which helps keep tuned circuits predictable. Current rating: 0.34A is the maximum continuous current the inductor is rated to handle, so it suits low-power signal and supply paths rather than high-current rails. DC resistance: 1300 mΩ at 20°C indicates the resistance of the winding, which contributes to power loss and slight voltage drop in operation. Frequency: a 2.52 MHz figure is given in the product data and should be considered when selecting the part for your circuit. Operating temperature: -40°C to 85°C covers typical indoor and protected outdoor electronics. Mounting: through-hole leads allow secure soldering on plated-through boards.

Compatibility and Requirements

This inductor is a through-hole part, so it requires a PCB with plated holes and standard soldering equipment. It is not a surface-mount device. The 0.34A current rating and 1300 mΩ DC resistance mean it should be used within those electrical limits. No specific voltage rating is stated in the product data, so check your circuit conditions against the supplied specifications. The 0410 case size and 10 mm length should be confirmed against your board layout before ordering.

Typical Uses

Common applications include filtering and tuning stages in communication equipment, computer devices, televisions, VCRs and radios. It is also suitable for general-purpose prototyping, educational projects and repair work where a 47uH through-hole inductor is specified.

What's in the Box

Package contents are not specified for this listing. Please check the product title and description carefully before ordering.

Quick specs

Manufacturer
Generic
Inductance
47uH
Tolerance (%)
10
Mounting Type
Through Hole
Current Rating (A)
0.34
Frequency (Hz)
2.52M
See all specifications