
1 / 4 · Click to enlarge
AI Summary
The 0510 220uH color ring DIP inductor is a through-hole component with 10% tolerance and 0.1A current rating. Its compact size and humidity-resistant coating make it ideal for filtering and tuning in tight PCB spaces.
Key Highlights
- 220uH fixed inductance with 10% tolerance for reliable filtering
- Through-hole mounting with 10mm axial leads for secure PCB insertion
- 0.1A current rating suits low-power signal and tuning circuits
- Epoxy resin coating resists humidity for stable long-term operation
- Compact 0510 package: 10mm length, 5mm body diameter, 3g weight
- Operates from -40°C to 85°C in demanding environments
Ideal For
- Electronics repair technicians replacing failed inductors
- Hobbyists building filter circuits on prototyping boards
- Audio equipment enthusiasts restoring vintage radios
- Students learning through-hole soldering and circuit design
Buying Tip
Check that your circuit's current does not exceed 0.1A and that the 220uH value matches your design before ordering.
Elecvora expert review
Our verdict
This 0510 220uH inductor is a solid, general-purpose component for low-current through-hole applications. Its humidity-resistant coating and wide temperature range make it dependable for repairs and prototyping.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Standard 220uH value with 10% tolerance
- Epoxy coating protects against humidity
- Wide operating temperature range
- Compact and lightweight design
Cons
- Current rating limited to 0.1A
- Relatively high DC resistance (7500mΩ)
Best for
Low-current filtering and tuning circuits in consumer electronics
Not ideal for
Power supply or high-current applications
Specifications
| Manufacturer | Generic |
|---|---|
| Inductance | 220uH |
| Tolerance (%) | 10 |
| Mounting Type | Through Hole |
| Current Rating (A) | 0.1 |
| Frequency (Hz) | 0.796M |
| Operating Temperature (°C) | -40 to 85 |
| Length (mm) | 10 |
| Width (mm) | 5 (Body Diameter) |
| Weight (g) | 3 |
| Case/Package | :0510 |
| DC Resistance(mΩ) at 20°C | 7500 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 0510 220uH 1W Color Ring DIP Inductor
Frequently Asked Questions
What is the inductance value of this inductor?
Can I use this inductor in a power supply circuit?
What is the maximum operating temperature?
Is this inductor RoHS compliant?
How many inductors are included in the package?
What is the self-resonant frequency?
Overview
The 0510 220uH color ring DIP inductor is a fixed-value, through-hole component built for precision and durability in electronic circuits. With a 220uH inductance and 10% tolerance, it provides consistent performance for filtering, tuning, and signal processing. The axial-lead design allows for easy insertion into printed circuit boards, while the epoxy resin coating protects against humidity and extends operational life. This inductor is a practical choice for engineers, hobbyists, and repair technicians working on a wide range of electronic devices.
Key Features
- Fixed 220uH inductance with 10% tolerance for predictable circuit behavior.
- Through-hole mounting with 10mm leads that can be bent for automatic insertion.
- 0.1A current rating suitable for low-current applications.
- Epoxy resin coating provides humidity resistance and mechanical protection.
- Compact dimensions of 10mm length and 5mm body diameter, weighing only 3g.
- Wide operating temperature range from -40°C to 85°C.
Specifications Explained
Inductance (220uH): This value determines the inductor's ability to store energy and oppose changes in current. It is commonly used in filters and oscillators. Tolerance (10%): The actual inductance may vary by ±10%, which is acceptable for most general-purpose circuits. Current Rating (0.1A): Do not exceed 0.1A to avoid overheating or saturation. DC Resistance (7500mΩ at 20°C): This relatively high resistance means some power loss, so it is best for signal-level applications rather than power conversion. Frequency (0.796M): The self-resonant frequency is approximately 0.796 MHz; above this, the inductor behaves capacitively. Operating Temperature (-40 to 85°C): Suitable for most indoor and protected outdoor environments.
Compatibility and Requirements
This inductor requires a through-hole PCB footprint with lead spacing that matches the 10mm lead length. It is compatible with standard soldering processes. No additional components are required for basic operation, but ensure your circuit does not exceed the 0.1A current rating or the 85°C maximum operating temperature. The 0510 case size is a standard form factor for axial inductors.
Typical Uses
Common applications include filtering in power supply lines, tuning circuits in radios and TVs, and signal processing in communication equipment and computer devices. It is also suitable for repair and replacement in consumer electronics such as VCRs and audio equipment.
What's in the Box
Package includes: 1 x 0510 220uH 1W Color Ring DIP Inductor. Note: Images are for reference only; the actual product is as per the product title.
Quick specs
- Manufacturer
- Generic
- Inductance
- 220uH
- Tolerance (%)
- 10
- Mounting Type
- Through Hole
- Current Rating (A)
- 0.1
- Frequency (Hz)
- 0.796M













