
1 / 4 · Click to enlarge
AI Summary
A compact 330uH through-hole inductor with 10% tolerance and 0.1A current rating. Its epoxy-coated body and long leads make it easy to install in PCB filtering and tuning circuits.
Key Highlights
- 330uH fixed inductance with 10% tolerance for predictable circuit behavior
- 0.1A current rating suits low-power filtering and tuning applications
- Through-hole axial package with 10mm length and 5mm body diameter
- Epoxy resin coating improves resistance to humidity
- 9100mΩ DC resistance at 20°C and 0.796MHz frequency rating
- Operates across -40 to 85°C for use in varied environments
Ideal For
- Electronics repair technicians replacing through-hole inductors
- Hobbyists building or modifying PCB circuits
- Production engineers specifying low-current fixed inductors
- Students learning about through-hole components
- Makers working on communication or audio equipment
Buying Tip
Check that your circuit current stays below 0.1A and that the 330uH value matches your design before soldering.
Elecvora expert review
Our verdict
A straightforward through-hole inductor that delivers the specified 330uH value with reasonable tolerance for low-current applications. Its epoxy coating and standard axial package make it a dependable choice for repair and prototyping.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Clear 330uH value with 10% tolerance
- Epoxy coating adds humidity resistance
- Standard through-hole package for easy mounting
- Wide operating temperature range
Cons
- Low 0.1A current rating limits use in power circuits
- High DC resistance may cause voltage drops in some designs
- Package quantity not specified
Best for
Low-current filtering and tuning in consumer electronics
Not ideal for
High-current power supply or motor drive circuits
Specifications
| Manufacturer | Generic |
|---|---|
| Inductance | 330uH |
| Tolerance (%) | 10 |
| Mounting Type | Through Hole |
| Current Rating (A) | 0.1 |
| Frequency (Hz) | 0.796M |
| Operating Temperature (°C) | -40 to 85 |
| Length (mm) | 10 |
| Width (mm) | 5 (Body Diameter) |
| Weight (g) | 3 |
| Case/Package | :0510 |
| DC Resistance(mΩ) at 20°C | 9100 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
Frequently Asked Questions
What is the inductance of this inductor?
Can I use this inductor in a high-current circuit?
Is this a surface-mount component?
What is the operating temperature range?
How many inductors are included?
Does it have any special coating?
Overview
The Generic 0510 330uH 1W Color Ring DIP Inductor is a fixed value through-hole component designed for printed circuit board mounting. It combines a 330uH inductance with a 10% tolerance and a 0.1A current rating in a small axial package. The body measures 10mm in length with a 5mm diameter, and the leads are long enough to bend for automated insertion or hand soldering. An epoxy resin coating helps protect the winding from humidity, supporting long-term reliability in electronic assemblies.
Key Features
- Fixed 330uH inductance with 10% tolerance for consistent filtering and tuning.
- 0.1A current rating suitable for low-current signal paths.
- Through-hole mounting with axial leads for secure PCB placement.
- Epoxy resin coating for improved humidity resistance.
- 9100mΩ DC resistance at 20°C and a 0.796MHz frequency rating.
- Operating temperature range of -40 to 85°C.
Specifications Explained
Inductance and tolerance: The 330uH value with ±10% tolerance means the actual inductance will fall within a predictable band, which is important when matching filter or tuning circuits. Current rating: At 0.1A, this inductor is intended for low-power sections rather than high-current power rails. DC resistance: The 9100mΩ figure indicates the resistance of the winding at 20°C, which contributes to small voltage drops in low-current designs. Frequency: The 0.796MHz rating gives an indication of the frequency range where the component is characterized. Package: The 0510 case size and 10mm length with 5mm body diameter make it easy to fit into compact layouts while leaving enough lead length for bending.
Compatibility and Requirements
This inductor is a through-hole component, so it requires a PCB with plated holes or a breadboard/perfboard for prototyping. It is not a surface-mount part and should not be placed on SMD pads. The 0.1A current rating means it should not be used in circuits that exceed that current. No additional accessories are required for basic installation beyond standard soldering tools.
Typical Uses
Common applications include filtering and decoupling in consumer electronics, communication equipment, computer devices, televisions, VCRs and radios. It can also be used in hobby projects, repair work and educational builds where a fixed 330uH inductor is needed.
What's in the Box
Package contents are not specified by the manufacturer. Please verify the quantity before ordering.
Quick specs
- Manufacturer
- Generic
- Inductance
- 330uH
- Tolerance (%)
- 10
- Mounting Type
- Through Hole
- Current Rating (A)
- 0.1
- Frequency (Hz)
- 0.796M













