
1 / 5 · Click to enlarge
AI Summary
A compact 6 mm x 14 mm DC vibration motor with a pre-attached wire, rated for 1.5 V to 5 V and a 19000 RPM speed. Its small metal body fits into tight enclosures where larger motors cannot go.
Key Highlights
- Slim 6 mm diameter metal body fits tight enclosures
- 14 mm body length with a 0.8 mm shaft, 4 mm long
- Runs on 1.5 V to 5 V DC for flexible low-voltage builds
- Draws about 0.195 A at rated voltage
- Rated speed of 19000 RPM for crisp haptic feedback
- Comes with a wire lead already attached for quick wiring
Ideal For
- Makers building compact haptic alert projects
- Repairers replacing a failed vibration motor in small devices
- Product developers prototyping pagers and wearables
- Hobbyists adding silent notification to toys and gadgets
- Students learning low-voltage motor control
Buying Tip
Check that your enclosure has room for a 6 mm diameter, 14 mm long body and that your switching circuit can handle about 0.195 A before ordering.
Elecvora expert review
Our verdict
A straightforward, compact vibration motor that covers a useful 1.5 V to 5 V range and reaches a fast 19000 RPM in a very small package. It is a sensible pick for tight builds and simple haptic alerts, provided you supply your own switching circuit and mounting solution.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very small 6 mm x 14 mm metal body
- Flexible 1.5 V to 5 V DC operating range
- High 19000 RPM rated speed for crisp feedback
- Wire lead already attached
- Low current draw of about 0.195 A
Cons
- No driver or control electronics included
- No mounting hardware or vibration weight supplied
- Requires soldering or crimping to connect
Best for
Compact haptic alerts and small-device vibration projects
Not ideal for
Applications needing a pre-built driver or plug-and-play module
Specifications
| Item Type | Vibration Type (General) |
|---|---|
| Voltage Rating (V) | 1.5 to 4.5VDC |
| Current | 0.195 |
| Rated Speed (RPM) | 19000 |
| Rated Voltage (VDC) | 1.5V-5V |
| Rated Current (A) | 0.195 |
| Motor diameter (mm) | 6 |
| Motor Length (mm) | 14 |
| Shaft Diameter | 0.8 mm |
| Shaft Length (mm) | 4 |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 4 × 1 × 1 cm |
What's in the box
- 1 x 1.5-5V DC Vibration Motor with Wire
Frequently Asked Questions
What voltage does this vibration motor need?
How much current does it draw?
Can I connect it straight to a microcontroller?
What is included with the motor?
What are the motor dimensions?
How should I care for the motor?
Overview
This is a small cylindrical vibration motor with a wire lead already attached. The motor body is made of metal and measures 6 mm across and 14 mm long, with a 0.8 mm shaft protruding 4 mm. Because it is compact and low-profile, it can be tucked into handheld devices, small enclosures and prototype builds where space is limited. The motor is rated for a 1.5 V to 5 V DC supply and draws roughly 0.195 A, producing a rated speed of 19000 RPM. That fast rotation turns into a noticeable buzz when the motor is mounted against a housing or a small weight, which is how vibration alerts are usually created in compact electronics.
Key Features
- Compact 6 mm diameter metal body for tight spaces
- 14 mm body length with a 4 mm long, 0.8 mm shaft
- Wide 1.5 V to 5 V DC operating range
- Approximately 0.195 A current draw
- 19000 RPM rated speed for quick, crisp vibration
- Wire lead pre-attached for straightforward connection
Specifications Explained
The voltage range of 1.5 V to 5 V DC is the most useful figure for buyers. It means the motor can be driven from a single dry cell, a small lithium cell, a USB supply or a regulated 5 V rail, so it fits many low-voltage projects without extra regulation. The 0.195 A current draw is modest and should be checked against the output capability of whatever switching device you use, such as a transistor or driver board.
The 19000 RPM rated speed describes how fast the shaft turns at rated voltage. In practice, a higher speed gives a stronger, sharper vibration feel, which is why this motor suits short alert pulses rather than continuous running. The 6 mm diameter and 14 mm length are the dimensions to check against your enclosure, along with the 0.8 mm shaft and its 4 mm length if you plan to fit a small eccentric weight or coupling.
Compatibility and Requirements
This motor needs a DC supply within its 1.5 V to 5 V range and a way to switch it on and off, since it has no built-in driver or control electronics. The attached wire lead provides the electrical connection, but you will need to join it to your circuit by soldering, crimping or a suitable connector. Because the motor draws about 0.195 A, do not connect it directly to a microcontroller pin; use a transistor, MOSFET or motor driver rated for the current. Mounting hardware and a vibration weight are not included, so plan how the motor will be fixed inside your device.
Typical Uses
Small vibration motors like this are commonly used for silent alerts and haptic feedback in pagers, GPS devices, mobile phones, wearables, toys and other compact electronics. They also work well in prototype projects where a short buzz signals an event, and in repairs where an original motor has failed and a compact replacement is needed. The low voltage range makes the motor convenient for battery-powered builds.
What's in the Box
- 1 x 1.5-5V DC Vibration Motor with Wire
Quick specs
- Item Type
- Vibration Type (General)
- Voltage Rating (V)
- 1.5 to 4.5VDC
- Current
- 0.195
- Rated Speed (RPM)
- 19000
- Rated Voltage (VDC)
- 1.5V-5V
- Rated Current (A)
- 0.195













