
1 / 5 · Click to enlarge
AI Summary
A compact stainless steel pressure transducer that reads 0-1.6MPa and outputs a 0.5-4.5V signal from a 5V supply. Its standard G 1/4" thread fits easily into air or water pressure lines for monitoring and control projects.
Key Highlights
- 0 to 1.6MPa measurement range with 1% FS accuracy
- 5V DC operation with linear 0.5-4.5V analogue output
- Stainless steel body for rigidity and long service life
- Standard G 1/4" thread for straightforward installation
- Compact 50mm body and light 70g weight
- Suitable for both air and water pressure measurement
Ideal For
- Makers building pressure monitoring projects with microcontrollers
- Engineers testing air or water pressure in small rigs
- Hobbyists logging tank or line pressure data
- Students learning about analogue pressure sensors
- Technicians needing a compact G 1/4" threaded sensor
Buying Tip
Confirm your port or adapter uses a G 1/4" thread and that your controller can read a 0.5-4.5V analogue signal before ordering.
Elecvora expert review
Our verdict
A tidy, low-cost pressure transducer that covers the 0-1.6MPa range with a simple 5V interface. It suits monitoring and control projects where a compact stainless steel sensor with a standard thread is enough.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple 5V supply and 0.5-4.5V analogue output
- Stainless steel body with G 1/4" thread
- Compact and light at 50mm and 70g
- Works with air and water
- Stable performance with compensation technology
Cons
- 1% FS accuracy limits precision work
- No cable or connector details provided
- Requires a matching G 1/4" port or adapter
Best for
Makers and technicians monitoring air or water pressure up to 1.6MPa
Not ideal for
Applications needing laboratory-grade accuracy or very high pressure ranges
Specifications
| Model No. / Name | Pressure Sensor |
|---|---|
| Operating Voltage (VDC) | 5 |
| Material | Stainless Steel |
| Thread Size (Inch) | G 1/4" |
| Pressure Range (MPa) | 0 - 1.6 |
| Output Voltage | 0.5 ~ 4.5 |
| Accuracy | 1% FS |
| Length (mm) | 50 |
| Width (mm) | 20 |
| Weight (g) | 70 |
| Shipping Weight | 0.075 kg |
| Shipping Dimensions | 6 × 3 × 2 cm |
What's in the box
- 1 x 1.6MPa Stainless Steel Pressure Transducer Sensor
Frequently Asked Questions
What pressure range does this sensor measure?
What voltage does it need?
Can it be used with water?
What thread size does it have?
What is included in the package?
How accurate is the sensor?
Overview
This pressure transducer is a compact sensing component that turns pressure into an electrical signal you can read with a microcontroller or meter. It measures pressures from 0 to 1.6MPa and produces a proportional output between 0.5V and 4.5V while powered from a 5V DC supply. The stainless steel housing gives the sensor rigidity, and the G 1/4" thread is a common size that makes it easy to mount into pipework, tanks and test setups.
Key Features
- Precision compensation technology and sensitive internal components for stable, reliable readings
- Small output error including nonlinearity, hysteresis and repeatability
- Light weight and small volume for easy installation and operation
- Stainless steel body with surge voltage protection
- Works with both air and water media
Specifications Explained
Pressure range and accuracy
The 0 to 1.6MPa range covers low-to-moderate pressure work, and accuracy is rated at 1% of full scale. That means readings are intended for general monitoring and control rather than laboratory-grade measurement.
Output signal
The 0.5V to 4.5V output rises with pressure across the range, so a controller with an analogue input can map voltage to pressure. Because the signal never reaches 0V or 5V, it stays within the linear band of the sensor.
Power and thread
The sensor runs on 5V DC, which suits common microcontroller boards and bench supplies. The G 1/4" thread is a standard inch-based port size, so check that your fitting matches before installation.
Compatibility and Requirements
You need a 5V DC supply and a device able to read a 0.5V to 4.5V analogue signal, such as a microcontroller with an analogue input. The G 1/4" thread must match the port or adapter you plan to use. The sensor is designed for air and water media.
Typical Uses
- Pressure detection in oil and gas tanks
- Water line and pump pressure monitoring
- Air pressure sensing in test rigs
- Data-logging and control projects
What's in the Box
1 x 1.6MPa Stainless Steel Pressure Transducer Sensor.
Quick specs
- Model No. / Name
- Pressure Sensor
- Operating Voltage (VDC)
- 5
- Material
- Stainless Steel
- Thread Size (Inch)
- G 1/4"
- Pressure Range (MPa)
- 0 - 1.6
- Output Voltage
- 0.5 ~ 4.5
Frequently Bought Together

0.2MPa Stainless Steel Pressure Transducer Sensor
$18.99
0.5MPa Stainless Steel Pressure Transducer Sensor
$17.99
0.8MPa Stainless Steel Pressure Transducer Sensor
$19.99
1.2MPa Stainless Steel Pressure Transducer Sensor
$17.99
1MPa Stainless Steel Pressure Transducer Sensor
$17.99
3MPa Stainless Steel Pressure Transducer Sensor
$31.99











