
1 / 5 · Click to enlarge
AI Summary
A compact 1MPa stainless steel pressure transducer with a 5V analog output and G 1/4 inch thread. It gives a simple voltage signal for air or water pressure readings on microcontroller and analog input projects.
Key Highlights
- 0 to 1 MPa pressure range with 1% full-scale accuracy
- 5 VDC operation with analog voltage output
- Stainless steel body for rigidity and durability
- Standard G 1/4 inch thread for common ports
- Compact 50 x 20 mm size at around 70 g
- Works with both air and water media
Ideal For
- Makers building microcontroller pressure monitoring projects
- Technicians servicing air and water lines
- Hobbyists working with small tanks and test rigs
- Students learning analog sensor integration
- Builders replacing a G 1/4 inch port sensor
Buying Tip
Check that your port is G 1/4 inch and that your reading device accepts a 5 VDC analog input before ordering.
Elecvora expert review
Our verdict
A straightforward analog pressure transducer that suits small monitoring projects thanks to its standard thread, 5 VDC supply and stainless steel body. It is a sensible choice when you need a simple voltage output rather than a digital interface.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Standard G 1/4 inch thread fits common ports
- 5 VDC operation suits microcontroller projects
- Stainless steel body is rigid and compact
- 1% FS accuracy across the 0 to 1 MPa range
Cons
- Requires a regulated 5 VDC supply
- Needs a suitable seal or fitting for installation
- Analog output must match your reading device
Best for
Makers and technicians monitoring air or water pressure up to 1 MPa
Not ideal for
Applications needing digital bus output or higher pressure ranges
Specifications
| Model No. / Name | Pressure Sensor |
|---|---|
| Operating Voltage (VDC) | 5 |
| Sensor Type | Analog Pressure Sensor |
| Material | Stainless Steel |
| Thread Size (Inch) | G 1/4" |
| Pressure Range (MPa) | 0 - 1 |
| Accuracy | 1% FS |
| Length (mm) | 50 |
| Width (mm) | 20 |
| Weight (g) | 70 |
| Shipping Weight | 0.075 kg |
| Shipping Dimensions | 6 × 3 × 2 cm |
What's in the box
- 1 x 1MPa Stainless Steel Pressure Transducer Sensor
Frequently Asked Questions
What pressure range does this sensor measure?
What voltage does it need?
What thread size does it use?
Can it be used with water and air?
What is included with the sensor?
How accurate is the sensor?
Overview
This pressure transducer turns a 0 to 1 MPa pressure reading into an analog voltage signal. It is built around a stainless steel body, which gives the unit rigidity and makes it suitable for both air and water lines. The standard G 1/4 inch thread lets it screw into widely used ports, and the compact 50 x 20 mm form factor keeps it out of the way in tight assemblies.
Key Features
- Analog output: produces a voltage signal that analog inputs can read directly.
- 5 VDC operation: matches common low-voltage project supplies.
- Stainless steel construction: a rigid body for repeated installation.
- 1% FS accuracy: consistent readings across the full 0 to 1 MPa span.
- Light and small: about 70 g and 50 mm long for easy mounting.
Specifications Explained
The 0 to 1 MPa range covers low-to-moderate pressures, which is typical for small tanks, lines and test rigs. 1% FS accuracy means the maximum error is a small percentage of the full scale, so readings stay dependable across the whole range rather than only near one point.
The 5 VDC operating voltage keeps the sensor compatible with common microcontroller boards and analog input modules. The G 1/4 inch thread is a standard port size, so adapters are often unnecessary when replacing an existing sensor. At 50 mm long, 20 mm wide and 70 g, the unit fits into compact enclosures and pipework.
Compatibility and Requirements
The transducer needs a regulated 5 VDC supply and an analog input that can read its voltage output. It is intended for air and water media, and the G 1/4 inch thread should match the port on your tank, line or manifold. Plan for a suitable seal or fitting to complete the installation, and confirm that your reading device can interpret the sensor's voltage range.
Typical Uses
- Pressure detection in oil and gas tanks
- Air line and water line monitoring
- Microcontroller and analog input projects
- Small test rigs and bench setups
- Replacement sensor for existing G 1/4 inch ports
What's in the Box
1 x 1MPa Stainless Steel Pressure Transducer Sensor.
Quick specs
- Model No. / Name
- Pressure Sensor
- Operating Voltage (VDC)
- 5
- Sensor Type
- Analog Pressure Sensor
- Material
- Stainless Steel
- Thread Size (Inch)
- G 1/4"
- Pressure Range (MPa)
- 0 - 1
Frequently Bought Together

0.2MPa Stainless Steel Pressure Transducer Sensor
$18.99
0.5MPa Stainless Steel Pressure Transducer Sensor
$17.99
0.8MPa Stainless Steel Pressure Transducer Sensor
$19.99
1.2MPa Stainless Steel Pressure Transducer Sensor
$17.99
1.6MPa Stainless Steel Pressure Transducer Sensor
$17.99
3MPa Stainless Steel Pressure Transducer Sensor
$31.99










