Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact single-cell AA battery holder without cover, featuring 110mm soldered wire leads and 2.6mm mounting holes. It provides a quick, solder-ready way to power small 1.5V DIY projects and prototypes.

Key Highlights

  • Holds one 1.5V AA battery securely
  • Pre-soldered 110mm wire leads for quick connection
  • Open-frame design for easy battery access
  • 2.6mm mounting holes for secure installation
  • Maximum operating temperature of 80°C
  • Lightweight at just 6g

Ideal For

  • Makers building small battery-powered prototypes
  • Students learning basic electronics
  • Technicians repairing or testing low-voltage devices
  • Hobbyists creating LED or sensor circuits
  • Educators demonstrating battery principles

Buying Tip

Remember to order AA batteries separately, as this holder does not include one.

Elecvora expert review

Our verdict

A practical, no-frills battery holder that does exactly what it should: hold one AA cell and provide solder-ready leads. The open design and mounting holes make it a convenient choice for quick prototypes and small installations.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Pre-soldered wire leads save time
  • Open frame allows fast battery changes
  • Mounting holes for secure installation
  • Compact and lightweight
  • Works with common AA batteries

Cons

  • Battery not included
  • No cover means exposed battery and contacts
  • Requires soldering or connection to your circuit

Best for

DIY electronics and prototyping with a single AA cell

Not ideal for

Applications requiring a covered or sealed battery compartment

Specifications

Width (mm)17
Item TypeBattery Holder
Battery TypeAA
Cell Quantity1
Operating Temperature (°C)80 Max
Storage Temperature (°C)25
Wire Length (mm)110
Mounting Hole Diameter (mm)2.6
ColorBlack
Length (mm)57.5
Weight (g)6
Shipping Weight0.01 kg
Shipping Dimensions8 × 5 × 3 cm

What's in the box

  • 1 x 1.5V AA Battery Holder Without Cover

Frequently Asked Questions

What type of battery does this holder take?
It takes one standard AA battery (1.5V nominal). Alkaline, NiMH, and NiCd AA cells can be used.
Is the battery included?
No, the battery is not included. You need to purchase an AA battery separately.
What is the wire length?
The pre-soldered wire leads are 110mm long.
Can I mount this holder to a surface?
Yes, it has two mounting holes with a diameter of 2.6mm for screws or bolts.
What is the maximum operating temperature?
The holder can operate at temperatures up to 80°C.
How should I store the holder?
Store it at around 25°C, preferably in a dry environment.

Overview

The Generic 1 x 1.5V AA Battery Holder Without Cover is a straightforward, open-frame holder designed to hold a single AA cell and deliver its 1.5V output to your circuit. The absence of a cover makes battery replacement fast and tool-free, which is handy during prototyping or when you need to frequently swap cells. Each holder comes with two pre-soldered wire leads measuring 110mm, so you can connect it to a breadboard, PCB, or terminal block without additional soldering on the holder itself. Two mounting holes (2.6mm diameter) let you screw or bolt the holder firmly in place inside an enclosure or on a project chassis.

Key Features

  • Single-cell design: Accepts one AA battery and provides 1.5V output.
  • Pre-soldered wire leads: 110mm length gives you flexibility when routing connections.
  • Open-frame construction: No cover means quick battery swaps and easy visual inspection.
  • Mounting holes: Two 2.6mm holes for secure fastening.
  • Temperature range: Operates up to 80°C maximum; store at 25°C.
  • Compact and light: Measures 57.5mm long, 17mm wide, and weighs only 6g.

Specifications Explained

Battery type and quantity: This holder is built for one AA cell. AA batteries are widely available in alkaline, NiMH, and NiCd chemistries, giving you flexibility in how you power your project. The holder does not include a battery, so you will need to supply your own.

Wire length: The 110mm leads are long enough to reach most small circuit boards or connectors while staying tidy. They are already soldered to the holder, saving you assembly time.

Mounting hole diameter: At 2.6mm, the holes accept small screws or bolts, making it easy to attach the holder to a panel or inside a case.

Operating and storage temperature: The holder is rated for operation up to 80°C, which covers typical indoor electronics use. For storage, keep it at around 25°C to avoid unnecessary wear.

Dimensions and weight: The holder is 57.5mm long and 17mm wide, with a weight of just 6g. Its small footprint fits easily into tight spaces.

Compatibility and Requirements

This holder is compatible with standard AA batteries (1.5V nominal). It does not include a battery, so you must purchase one separately. The pre-soldered wire leads are ready to connect to your circuit; no additional connectors are supplied. The holder is not intended for use with other battery sizes.

Typical Uses

Use this holder for small DIY electronics projects, breadboard prototypes, test jigs, battery-powered sensors, LED circuits, and repair tasks where a single AA cell is needed. It is also useful in educational settings for teaching basic electronics and battery safety.

What's in the Box

One 1 x 1.5V AA battery holder without cover. Battery not included.

Quick specs

Width (mm)
17
Item Type
Battery Holder
Battery Type
AA
Cell Quantity
1
Operating Temperature (°C)
80 Max
Storage Temperature (°C)
25
See all specifications