
1 / 5 · Click to enlarge
AI Summary
A 1000 mm chrome-plated carbon steel rod with a 10 mm diameter, made for smooth linear motion. Its polished surface pairs with linear bearings for 3D printers, CNC machines and other sliding assemblies.
Key Highlights
- 10 mm diameter suits common linear bearing sizes
- 1000 mm length for full-size printer and CNC axes
- Chrome-plated carbon steel for wear resistance
- Smooth silver finish for consistent sliding motion
- Protected with anti-rust oil and packed in a wooden box
- Approximately 800 g per rod
Ideal For
- Makers building or upgrading 3D printers
- CNC and engraving machine builders
- Engineers working on linear motion assemblies
- Robotics hobbyists and students
- Anyone replacing a worn 10 mm smooth rod
Buying Tip
Measure the available space in your frame before ordering, because a 1000 mm rod cannot be shortened without cutting and re-finishing the ends.
Elecvora expert review
Our verdict
A solid, no-frills shaft for anyone who needs a metre of 10 mm chrome-plated rod for a printer, CNC build or linear motion project. The protective packaging and anti-rust coating are welcome touches for a bare steel component.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Useful 1000 mm length for full-size axes
- Common 10 mm diameter for linear bearings
- Chrome-plated carbon steel surface
- Anti-rust oil and wooden box packaging
Cons
- Bearings and mounts are not included
- Cannot be shortened easily without cutting and finishing
- Long rod needs careful handling to avoid bending
Best for
Makers building or repairing 3D printers, CNC machines and linear motion assemblies
Not ideal for
Anyone needing a pre-assembled linear rail with bearings and mounts included
Specifications
| Material | Carbon Steel (Chrome-plated) |
|---|---|
| Diameter (mm) | 10 |
| Length (mm) | 1000 |
| Color | Silver |
| Weight (g) | 800 |
| Shipping Weight | 0.9 kg |
| Shipping Dimensions | 102 × 4 × 3 cm |
What's in the box
- 1 x 1000 mm chrome-plated smooth rod, 10 mm diameter
Frequently Asked Questions
What is this rod made of?
What is the diameter and length?
What can I use it for?
Are bearings included?
How should I care for the rod?
How is it packaged?
Overview
This smooth rod is a single 1000 mm length of carbon steel with a chrome-plated finish and a 10 mm outer diameter. The surface is polished to a silver finish so that linear bearings and sliding components can travel along it with smooth, consistent motion. It is a component rather than a finished machine part, intended for makers, engineers and repairers who are building or maintaining linear motion systems.
At one metre long, the rod covers the full travel of many 3D printer axes and CNC engraving machines. The 10 mm diameter is a familiar size in linear motion work, which makes it easier to match with bearings and shaft supports already in a build.
Key Features
- Chrome-plated carbon steel: a hard, wear-resistant surface intended to cope with repeated sliding contact.
- 10 mm diameter: a common shaft size for linear bearings and motion assemblies.
- 1000 mm length: enough for full-length axes and larger custom frames.
- Smooth silver finish: supports consistent movement along the rod.
- Protected packaging: anti-rust oil, a paper sleeve and a wooden box for transport.
Specifications Explained
The 10 mm diameter is the outer dimension of the rod and the figure to check when selecting bearings or supports that will run on it. The 1000 mm length is the overall size of the rod, so measure your frame before ordering if space is tight. Carbon steel with chrome plating describes the construction: a steel core with a plated outer layer that helps resist wear and corrosion during use. At around 800 g, the rod is light enough to handle by hand but rigid enough for machine frames. Shipping weight is about 0.9 kg and the packed dimensions are approximately 102 × 4 × 3 cm.
Compatibility and Requirements
This rod is intended for linear motion applications where a 10 mm shaft is required. It is commonly used with linear bearings that match its diameter, but bearings and other hardware are not included. Check that your design accepts a 1000 mm rod and that your mounts support a 10 mm shaft before purchase. No mounting brackets, end supports or fasteners are supplied with the rod.
Typical Uses
- 3D printer axis rods and kit builds
- CNC and engraving machine motion rails
- Hydraulic and mechanical linkage applications
- Robotics and custom linear motion projects
- Replacement of a worn or bent smooth rod
What's in the Box
One 1000 mm chrome-plated smooth rod with a 10 mm diameter. The rod is coated with anti-rust oil and packed in a paper sleeve inside a wooden box.
Quick specs
- Material
- Carbon Steel (Chrome-plated)
- Diameter (mm)
- 10
- Length (mm)
- 1000
- Color
- Silver
- Weight (g)
- 800
- Shipping Weight
- 0.9 kg













