
1 / 4 · Click to enlarge
AI Summary
A lightweight 100A power distribution board for multirotor builds, featuring eight ESC connection pairs and large solder pads. It simplifies wiring and supports quad, hex, and octocopter configurations.
Key Highlights
- 100A total current capacity for multirotor power distribution
- Eight pairs of ESC connection outputs
- Large solder pads for easy and secure wiring
- Compact 50mm width and only 8g weight
- 45mm and 35mm square mounting hole spacing
- Compatible with MK and KK flight control systems
Ideal For
- Drone builders assembling quadcopters, hexacopters, or octocopters
- Hobbyists looking for a lightweight power distribution solution
- FPV pilots who prefer soldered connections
- Makers using MK or KK flight control systems
- Anyone needing a compact board for small multirotor frames
Buying Tip
Check that your total ESC current draw does not exceed 100A and that your frame has 45mm or 35mm square mounting holes.
Elecvora expert review
Our verdict
A simple, effective power distribution board that is lightweight and easy to work with, though it requires soldering and careful current planning. It is a solid choice for small to medium multirotor builds.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Lightweight and compact
- Large solder pads simplify connections
- Supports up to eight ESCs
- Compatible with common mounting patterns
Cons
- Requires soldering of all connections
- No pre-installed connectors
- Current limits must be carefully managed
Best for
Small to medium multirotor builds with soldered connections
Not ideal for
Builders who prefer plug-and-play solutions or high-current applications exceeding 100A total
Specifications
| Item Type | Power Distribution Board |
|---|---|
| Width (mm) | 50 |
| Mounting Hole Diameter (mm) | 45×35mm |
| Weight (g) | 8 |
| Shipping Weight | 0.012 kg |
| Shipping Dimensions | 6 × 6 × 1 cm |
What's in the box
- 1 x Multirotor ESC Power Distribution Battery Board for Quadcopter
Frequently Asked Questions
How many ESCs can I connect to this board?
What is the maximum current this board can handle?
Does this board come with pre-soldered connectors?
Is this board compatible with my flight controller?
What is included in the package?
How should I care for this board?
Overview
The 100A Multirotor ESC Power Distribution Board is designed to make power wiring in multi-rotor aircraft straightforward and tidy. It takes power from your battery and distributes it to up to eight ESCs, eliminating the need for messy wiring harnesses. The board is compact, lightweight, and built with large solder pads that are easy to work with, even for less experienced builders. Whether you are assembling a small quadcopter or a larger octocopter, this board provides a clean and reliable solution for power distribution.
Key Features
- High current capacity: The board can handle up to 100A total, with each output supporting up to 20A in a quadcopter build or 10A each in an octocopter configuration.
- Multiple outputs: Eight pairs of connection points allow you to power up to eight ESCs, making it suitable for quad, hex, and octo copters.
- Large solder pads: The generous pad size simplifies soldering and ensures secure connections.
- Lightweight design: At only 8 grams, it adds minimal weight to your build.
- Standard mounting: Mounting holes are spaced at 45mm and 35mm square, compatible with MK and KK flight control systems.
Specifications Explained
100A total current: This is the maximum total current the board can distribute from your battery to all connected ESCs. It is important to ensure your combined ESC current draw does not exceed this rating.
Per-output current: Each pair of outputs can handle up to 20A in a quadcopter setup or 10A in an octocopter setup. This means you should choose your ESCs and motors accordingly to stay within these limits.
Width and weight: The board is 50mm wide and weighs just 8 grams, making it easy to fit into tight builds without adding noticeable weight.
Mounting hole spacing: The 45mm and 35mm square spacing allows the board to be mounted on frames that support these standard patterns, including those designed for MK and KK flight controllers.
Compatibility and Requirements
This board is compatible with MK and KK flight control systems and their mounting hole patterns. It requires soldering for both battery and ESC connections; no connectors are pre-installed. You will need a soldering iron and solder to attach your battery leads and ESC wires. The board does not include a battery or ESCs, so those must be sourced separately.
Typical Uses
This power distribution board is ideal for quadcopters, hexacopters, and octocopters where a compact and lightweight power distribution solution is needed. It is particularly useful for smaller multirotor builds where space and weight are critical. The large solder pads make it a good choice for builders who prefer soldered connections over plug-in connectors.
What's in the Box
1 x Multirotor ESC Power Distribution Battery Board for Quadcopter.
Quick specs
- Item Type
- Power Distribution Board
- Width (mm)
- 50
- Mounting Hole Diameter (mm)
- 45×35mm
- Weight (g)
- 8
- Shipping Weight
- 0.012 kg
- Shipping Dimensions
- 6 × 6 × 1 cm














