Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A set of four 100mm aluminium mecanum wheels with bush type rollers, including two left and two right wheels. Each wheel supports 8–10 kg and enables omnidirectional robot movement.

Key Highlights

  • Set of four wheels: two left and two right for omnidirectional motion
  • Aluminium construction with nylon and TPR rollers for durability
  • Load capacity of 8 to 10 kg per wheel
  • 18mm inner diameter and PCD 47.5mm mounting pattern
  • Nine rollers per wheel at 45 degrees for smooth lateral travel
  • Includes 12 M5×65 Allen bolts for coupling or wheel mounting

Ideal For

  • Robotics competition teams building Robocon or Robocup robots
  • US First and battle robot builders needing omnidirectional movement
  • Research and education platforms requiring precise lateral motion
  • Makers building automated guided vehicles or camera sliders
  • Anyone assembling a four-wheel mecanum drive system

Buying Tip

Check that your motor coupling or hub matches the 18mm inner diameter and 47.5mm PCD before ordering, and plan for a four-wheel layout since left and right wheels must be used together.

Elecvora expert review

Our verdict

A practical four-wheel mecanum set for small to medium robotics projects, with straightforward bush type rollers and a useful load rating per wheel. It is a good starting point for competition or research robots where omnidirectional movement is needed.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Complete set with two left and two right wheels
  • Aluminium plates keep weight reasonable at about 400g per wheel
  • Clear load capacity of 8–10 kg per wheel
  • Includes M5 bolts for mounting
  • Standard 18mm bore and 47.5mm PCD suit common hubs

Cons

  • Motors, drivers, and chassis are not included
  • Bush type rollers may need more maintenance than bearing versions in dusty environments
  • Load capacity is per wheel and depends on even weight distribution

Best for

Robotics teams and makers building four-wheel omnidirectional robots

Not ideal for

Heavy payload platforms or high-speed outdoor vehicles

Specifications

Roller TypeBush
MaterialAluminium
Size (mm)100
Inner Diameter (mm)18
Length of Roller (mm)47.5
Load Capacity (Kg/Wheel)8 ~ 10
Weight (g)Per Wheel, 400
No. of Plates2, Per Wheel
No. of Rollers per Wheel9
Outer Diameter (mm)100
Roller MaterialNylon+ TPR
Spacer materialNylon
Wheel Width (mm)50
Plate Thickness (mm)2.5
Diameter of Holes5 mm (M5 bolt compatible).
Mounting Hole PCD (mm)PCD 47.5 mm.
Nut TypeHex, Nyloc Nut.
Shipping Weight1.8 kg
Shipping Dimensions20 × 20 × 10 cm

What's in the box

  • 2 × 100mm aluminium mecanum wheels, left-hand
  • 2 × 100mm aluminium mecanum wheels, right-hand
  • 12 × M5×65 Allen bolts

Frequently Asked Questions

Do I need special motors for these wheels?
No special motors are required, but the motor coupling or hub must match the wheel's 18mm inner diameter and 47.5mm PCD with 5mm holes. Motors and couplings are not included.
Can I use only two wheels?
The set is intended for four-wheel use because the left and right wheels are mirror images and work together for omnidirectional movement. Using fewer than four will not give the same motion behaviour.
What is the maximum load for the set?
Each wheel is rated at 8 to 10 kg. The total load for a four-wheel robot depends on distribution, but the per-wheel rating should not be exceeded.
Are bearings included?
No, these are bush type rollers, which use bushings rather than bearings. The wheels are supplied assembled with the bush type rollers in place.
What is included in the package?
You receive two left-hand and two right-hand 100mm aluminium mecanum wheels, plus 12 M5×65 Allen bolts (three per wheel). Nyloc nuts are specified for the wheel but not listed as included.
How should I maintain the wheels?
Keep the rollers clean and check that they spin freely. In dusty environments, clean the roller area regularly and inspect the bushings for wear.

Overview

This set of four 100mm mecanum wheels is designed for robotics projects that require movement in any direction without changing the robot's orientation. Each wheel is built around an aluminium frame with two plates and carries nine rollers made from nylon and TPR. The rollers are arranged at 45 degrees to the wheel plane, which is what allows a four-wheel robot to strafe, rotate, and move diagonally when the motors are driven at different speeds and directions. The set contains two left-hand and two right-hand wheels, as the two sides are mirror images and must be used together.

Key Features

  • Bush type rollers: Simple, robust roller mounting for general robotics use.
  • Aluminium plates: Two 2.5mm plates per wheel keep weight low while providing a rigid structure.
  • Nylon and TPR rollers: Roller material chosen for a balance of grip and wear resistance.
  • 9 rollers per wheel: Evenly spaced rollers help maintain contact and smooth motion.
  • Load capacity 8–10 kg per wheel: Suitable for small to medium robots when the load is distributed across four wheels.
  • Mounting holes: 5mm holes on a 47.5mm PCD, compatible with M5 bolts.

Specifications Explained

The 100mm outer diameter gives a compact wheel that fits many robot chassis without raising the ride height too much. The 50mm wheel width and 47.5mm roller length provide a stable contact patch. The 18mm inner diameter is the bore that fits over a hub or coupling, and the 5mm holes on a 47.5mm PCD are where the wheel attaches to the motor hub. Each wheel weighs approximately 400g, so the four-wheel set adds about 1.6kg to the robot before motors and chassis. The load capacity of 8 to 10 kg per wheel is a per-wheel figure; in a four-wheel robot, the total supported weight depends on how evenly the load is distributed.

Compatibility and Requirements

The wheels are intended for use with motor couplings or hubs that match the 18mm inner diameter and the 47.5mm PCD with 5mm holes. M5×65 Allen bolts are included for coupling or wheel mounting. The set does not include motors, motor drivers, or a chassis, so these must be selected separately. Because the left and right wheels are mirror images, all four wheels should be installed as a set for correct omnidirectional behaviour.

Typical Uses

These wheels are commonly used on competition robots such as Robocon, Robocup, and US First entries, as well as battle robots and general research platforms. They also suit any wheeled robot project where sideways or diagonal movement is useful, such as camera sliders, inspection robots, and automated guided vehicles built at a small scale.

What's in the Box

  • 2 × 100mm aluminium mecanum wheels, left-hand
  • 2 × 100mm aluminium mecanum wheels, right-hand
  • 12 × M5×65 Allen bolts (3 per wheel)

Quick specs

Roller Type
Bush
Material
Aluminium
Size (mm)
100
Inner Diameter (mm)
18
Length of Roller (mm)
47.5
Load Capacity (Kg/Wheel)
8 ~ 10
See all specifications