Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This is a set of four 60mm aluminium mecanum wheels with bearing-type rollers, including two left and two right wheels. They enable compact robots to move forward, backward and sideways without changing orientation.

Key Highlights

  • Complete set of 2 left and 2 right 60mm mecanum wheels
  • Bearing-type rollers for smooth, low-friction movement
  • Lightweight aluminium construction at 93g per wheel
  • Each wheel supports up to 3kg load capacity
  • 16mm inner diameter and 31mm wheel width
  • Includes mounting bolts and coupling sets

Ideal For

  • Robotics hobbyists building small omnidirectional robots
  • Educational projects teaching mecanum wheel kinematics
  • Prototype developers needing compact drivetrain components
  • Competition robot teams with weight and size constraints

Buying Tip

Verify that your motor shafts or hubs match the 16 mm inner diameter before ordering, as no hubs are included.

Elecvora expert review

Our verdict

These 60mm mecanum wheels offer a practical entry point into omnidirectional robotics with a complete left-right set and included hardware. The bearing rollers and aluminium build provide smooth performance for lightweight projects, though the 3 kg load limit per wheel restricts them to smaller robots.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Complete set with two left and two right wheels
  • Bearing-type rollers for smooth rotation
  • Lightweight aluminium construction at 93g per wheel
  • Includes mounting bolts and coupling sets
  • Compact 60mm size suits small chassis

Cons

  • Load capacity of 3kg per wheel limits payload
  • No hubs included; requires matching 16mm bore
  • Rollers may wear over time with heavy use

Best for

Small omnidirectional robots and educational projects

Not ideal for

Heavy-duty or high-load applications

Specifications

Roller TypeBearing
MaterialAluminium
Size (mm)60
Inner Diameter (mm)16
Length of Roller (mm)30
Load Capacity (Kg/Wheel)3
Weight (g)93, Per Wheel
No. of Plates2
No. of Rollers per Wheel8
Outer Diameter (mm)60
Roller MaterialNylon+ TPR
Spacer materialNylon
Wheel Width (mm)31
Plate Thickness (mm)2.5
Nut TypeNyloc Nut.
Shipping Weight0.49 kg
Shipping Dimensions24 × 20 × 8 cm

What's in the box

  • 2 x 60mm Aluminium Mecanum Wheels (bearing type roller) - Right
  • 2 x 60mm Aluminium Mecanum Wheels (bearing type roller) - Left
  • 3 x M3×35 Allen Bolts per wheel (12 bolts total)
  • 1 x 2-Coupling set per wheel

Frequently Asked Questions

What is included in this set?
The set includes two left and two right 60mm mecanum wheels, plus M3×35 Allen bolts (three per wheel) and one 2-coupling set per wheel.
What is the inner diameter of these wheels?
The inner diameter is 16 mm, which is the bore size for mounting to a hub or axle. Ensure your motor shaft or hub matches this dimension.
Can these wheels be used with LEGO or servo motors?
The product data does not specify compatibility with LEGO or servo motors. The wheels are designed for connection to drive motors via hubs, but you should verify mounting compatibility based on the 16 mm inner diameter.
What is the load capacity per wheel?
Each wheel supports up to 3 kg. For a four-wheel robot, the total load capacity depends on weight distribution, but the per-wheel limit should not be exceeded.
Do I need additional parts to use these wheels?
Yes, you will need drive motors, controller boards, batteries and appropriate hubs to complete your robot. The wheels come with coupling sets and bolts but no motors or hubs.
How should I maintain these wheels?
Keep the rollers clean and check the Nyloc nuts periodically for tightness. Avoid exposing the wheels to excessive dust or moisture to prolong bearing life.

Overview

The EasyMech 60mm Aluminium Mecanum Wheel Set is a complete four-wheel kit designed for building omnidirectional robotic platforms. Each wheel features eight rollers arranged at 45 degrees to the wheel axis, allowing a robot to move forward, backward and sideways without changing its orientation. This set includes two left-hand and two right-hand wheels, giving you a matched set for a four-wheel drive configuration.

Made from aluminium with nylon and TPR rollers, these wheels are lightweight yet sturdy. The bearing-type rollers reduce friction for smoother motion, and the 2.5 mm thick plates provide a balance of strength and low weight. At 93 g per wheel, the set adds minimal mass to your project.

Key Features

  • Complete set: Two left and two right wheels for a full drivetrain.
  • Bearing-type rollers: Each of the eight rollers per wheel runs on bearings for smooth rotation.
  • Lightweight aluminium: 93 g per wheel keeps your robot agile.
  • Load capacity: Each wheel supports up to 3 kg, suitable for lightweight robots.
  • Mounting hardware included: Comes with M3 bolts and coupling sets for easy installation.

Specifications Explained

60 mm outer diameter: A compact size that fits small robotic chassis where space is limited. 16 mm inner diameter: This is the bore size for the axle or hub connection, so check that your motor shaft or hub matches this dimension. 31 mm wheel width: The overall width of the wheel, including rollers, which affects clearance and mounting. 30 mm roller length: The length of each individual roller along the wheel axis. 2.5 mm plate thickness: The side plates are 2.5 mm thick, providing a good strength-to-weight ratio. Nyloc nuts: Used to secure the rollers, these nuts resist loosening from vibration.

Compatibility and Requirements

These wheels are designed to be connected to drive motors and hubs. The 16 mm inner diameter is the key dimension for mounting. You will need to supply your own drive motors, controller boards and batteries to complete the robot. The included coupling sets and M3 bolts help with attaching the wheels to your chosen hubs or motor shafts. No additional hubs are included, so ensure your motor setup matches the 16 mm bore or use appropriate adapters.

Typical Uses

This wheel set is ideal for small autonomous robots, educational projects, hobbyist prototypes and any application requiring precise omnidirectional movement. Use them in robot competitions, research platforms or DIY robotics builds where space and weight are critical.

What's in the Box

  • 2 x 60mm Aluminium Mecanum Wheels (bearing type roller) - Right
  • 2 x 60mm Aluminium Mecanum Wheels (bearing type roller) - Left
  • 3 x M3×35 Allen Bolts per wheel (12 bolts total)
  • 1 x 2-Coupling set per wheel

Quick specs

Roller Type
Bearing
Material
Aluminium
Size (mm)
60
Inner Diameter (mm)
16
Length of Roller (mm)
30
Load Capacity (Kg/Wheel)
3
See all specifications