
1 / 5 · Click to enlarge
AI Summary
Rigid 5mm x 8mm shaft coupling made from hardened mild steel for NEMA17 stepper motors. Includes two grub screws and an Allen key for a secure, corrosion-resistant connection.
Key Highlights
- Hardened mild steel body for high rigidity
- 5mm and 8mm bores suit NEMA17 and 8mm rods
- Black painted finish resists corrosion
- Includes two M4x6 grub screws and 2mm Allen key
- Compact 16mm outer diameter, 30mm length
- Weighs only 38g for low rotating mass
Ideal For
- 3D printer builders upgrading or replacing shaft couplings
- CNC hobbyists connecting stepper motors to lead screws
- DIY motion control projects requiring rigid coupling
- Makers working with NEMA17 motors and 8mm rods
Buying Tip
Check that your motor shaft is exactly 5mm and your driven rod is 8mm before ordering, as this rigid coupling will not accommodate other sizes.
Elecvora expert review
Our verdict
A solid, no-frills rigid coupling that offers good rigidity and corrosion resistance for typical 3D printer and CNC applications. The included hardware makes installation straightforward.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High rigidity from hardened mild steel
- Corrosion-resistant black finish
- Includes grub screws and Allen key
- Compact and lightweight
Cons
- Rigid design requires precise alignment
- Only fits 5mm and 8mm shafts
- Set screws may loosen under vibration without threadlock
Best for
Makers needing a strong, rigid coupling for NEMA17 motors and 8mm rods
Not ideal for
Applications with misalignment or shafts outside 5mm and 8mm
Specifications
| Item Type | NEMA17 Shaft Coupling |
|---|---|
| Material | Mild Steel |
| Bore Diameter [B] (mm) | 5 x 8 |
| Bore Diameter [d2] (mm) | 8 |
| Bore Diameter [d1] (mm) | 5 |
| Outer Diameter (mm) | 16 |
| Length (mm) | 30 |
| Weight (g) | 38 |
| Shipping Weight | 0.039 kg |
| Shipping Dimensions | 4 × 2 × 2 cm |
What's in the box
- 1 x EasyMech MS NEMA17 Shaft Coupling 5mm x 8mm
- 1 x 2mm Allen key
- 2 x MS M4x6 socket set screws
Frequently Asked Questions
What is the bore diameter of this coupling?
Does it come with screws and a tool?
Is this coupling suitable for a NEMA17 stepper motor?
What material is the coupling made of?
Can I use this coupling in a 3D printer?
How do I maintain the coupling?
Overview
The EasyMech MS NEMA17 Shaft Coupling 5mm x 8mm is a rigid shaft coupling made from hardened mild steel. It is designed to connect a NEMA17 stepper motor with a 5mm shaft to an 8mm rod, such as a threaded rod, precision trapezoidal rod, or other 8mm shaft. The coupling measures 16mm in outer diameter and 30mm in length, and weighs 38g. Its black painted finish helps protect against corrosion and gives it a neat appearance. Two M4x6 socket set screws, tightened with the included 2mm Allen key, clamp the coupling onto both shafts for a firm hold.
Key Features
- Hardened mild steel construction: Provides greater density and rigidity than aluminium couplings, helping maintain alignment under load.
- Dual bore sizes: 5mm on one side (d1) and 8mm on the other (d2) to match common motor and rod diameters.
- Corrosion-resistant finish: Black paint coating protects the steel surface.
- Secure fastening: Two M4x6 socket set screws grip the shafts firmly when tightened with the supplied Allen key.
- Compact dimensions: 16mm outer diameter and 30mm length suit tight assemblies.
Specifications Explained
The bore diameters are the most critical specifications: d1 is 5mm and d2 is 8mm. This means one end fits a 5mm shaft (typical of many NEMA17 stepper motors) and the other fits an 8mm shaft or rod. The 16mm outer diameter and 30mm length determine the space required around the coupling; ensure your setup has clearance for these dimensions. The 38g weight indicates a relatively light component that won't add significant inertia to the motion system. The mild steel material offers high rigidity, which is beneficial for applications where backlash and torsional flex must be minimised. The included grub screws are M4x6, and the Allen key is 2mm, matching the screw heads.
Compatibility and Requirements
This coupling is intended for use with NEMA17 stepper motors that have a 5mm shaft and with 8mm rods or shafts. It is not suitable for shafts of other diameters. Installation requires access to the set screws and the use of the provided 2mm Allen key. No additional fasteners are needed beyond those supplied. The coupling is a rigid type, so ensure that the motor shaft and the driven shaft are well aligned to avoid excessive stress on bearings or the coupling itself.
Typical Uses
This coupling is commonly used in 3D printers, CNC machines, and other DIY motion projects to join a stepper motor to a lead screw or threaded rod. It can also be found in small automation setups where a compact, rigid connection is required. The mild steel construction makes it suitable for applications where aluminium couplings might wear or flex more readily.
What's in the Box
- 1 x EasyMech MS NEMA17 Shaft Coupling 5mm x 8mm
- 1 x 2mm Allen key (medium quality)
- 2 x MS M4x6 socket set screws
Quick specs
- Item Type
- NEMA17 Shaft Coupling
- Material
- Mild Steel
- Bore Diameter [B] (mm)
- 5 x 8
- Bore Diameter [d2] (mm)
- 8
- Bore Diameter [d1] (mm)
- 5
- Outer Diameter (mm)
- 16

















