
1 / 3 · Click to enlarge
AI Summary
A 100nH surface-mount air-core inductor rated for 1.7A with 5% tolerance and low 12.3mΩ DC resistance. Its high-Q air-core design suits RF filtering, impedance matching, and frequency-selection circuits.
Key Highlights
- 100nH inductance with tight 5% tolerance
- 1.7A current rating for moderate-power RF paths
- Low 12.3mΩ DC resistance at 20°C
- SMD/SMT mounting for automated assembly
- Compact 4.83mm by 3.81mm footprint
- Air-core construction supports high Q
Ideal For
- RF circuit designers working on VHF/UHF boards
- Electronics hobbyists building SMD prototypes
- Repair technicians replacing RF inductors
- Students learning surface-mount RF design
- Makers needing compact high-Q inductors
Buying Tip
Confirm your PCB pad layout matches the 4.83mm by 3.81mm SMD footprint before ordering, and check that your circuit’s current stays below 1.7A.
Elecvora expert review
Our verdict
A solid choice for compact RF designs that need a high-Q inductor with a useful current rating. It offers predictable performance and a small footprint, though it is a single component with no extras.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High Q from air-core construction
- 1.7A current rating for moderate power
- Tight 5% tolerance
- Low 12.3mΩ DC resistance
- Compact SMD footprint
Cons
- Sold separately, one piece per order
- Requires SMD soldering skills and equipment
- No datasheet or tolerance curve included
Best for
RF prototyping and repair where a 100nH SMD inductor is needed
Not ideal for
High-power or through-hole applications
Specifications
| Manufacturer | Generic |
|---|---|
| Inductance | 100nH |
| Tolerance (%) | 5 |
| Current Rating (A) | 1.7 |
| Mounting Type | SMD/SMT |
| Length (mm) | 4.83 |
| Width (mm) | 3.81 |
| Weight (g) | 0.5 each |
| DC Resistance(mΩ) at 20°C | 12.3 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 100nH 1.7A Air-Core Inductor
Frequently Asked Questions
What is the inductance and tolerance of this inductor?
How much current can it handle?
What mounting type does it use?
What are the dimensions and weight?
What is included when I order?
How should I store and handle it?
Overview
The 100nH 1.7A Air-Core Inductor is a surface-mount RF component built for circuits that need stable inductance and low resistive loss. Unlike solid-core inductors, its air-core design avoids magnetic saturation effects, which helps maintain performance under current load. This makes it a useful building block for RF designers and repair technicians working on compact boards where space and signal integrity are critical.
Key Features
- Air-core construction for high Q and consistent RF behaviour
- 1.7A current rating supports moderate power handling
- 5% tolerance keeps inductance close to nominal
- 12.3mΩ DC resistance at 20°C minimises I²R losses
- SMD/SMT mounting compatible with reflow soldering
- Compact size at 4.83mm length and 3.81mm width
Specifications Explained
Inductance (100nH): This value is suited to VHF and low-UHF RF work, where small inductance values are common in matching networks and filters.
Tolerance (5%): A tight tolerance means the actual inductance stays within 95nH to 105nH, reducing the need for tuning in sensitive circuits.
Current rating (1.7A): The inductor can carry up to 1.7A continuously, making it suitable for low-to-moderate power RF paths and broadband I/O filtering.
DC resistance (12.3mΩ): Low resistance helps limit heating and voltage drop, which is important in filter and matching applications.
Mounting type (SMD/SMT): The part is designed for surface-mount assembly, so it works with standard pick-and-place and reflow processes.
Compatibility and Requirements
This inductor is a passive SMD component. It requires a compatible PCB footprint and a soldering method suitable for surface-mount parts. No additional accessories are included. Verify your circuit’s current and inductance requirements against the ratings above before use.
Typical Uses
- RF filtering and broadband I/O filtering
- Frequency selection networks
- Impedance matching in RF front ends
- Prototyping and repair of SMD RF boards
What's in the Box
Each order includes one 100nH 1.7A air-core inductor.
Quick specs
- Manufacturer
- Generic
- Inductance
- 100nH
- Tolerance (%)
- 5
- Current Rating (A)
- 1.7
- Mounting Type
- SMD/SMT
- Length (mm)
- 4.83













