Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 100uF 25V radial aluminium electrolytic capacitor in a through-hole package for DC circuits. It is a straightforward, low-cost part for smoothing, filtering and decoupling work.

Key Highlights

  • 100uF capacitance with 20% tolerance for general-purpose DC filtering
  • 25V DC voltage rating suits low-voltage supply rails
  • Radial through-hole mounting for standard PCB assembly
  • Operates from -40 to 80 degrees Celsius
  • Compact 7.5mm by 6.6mm body, about 4 grams each
  • Polarized design requires correct polarity during installation

Ideal For

  • Electronics hobbyists building or repairing DC circuits
  • Repair technicians replacing through-hole capacitors
  • Students learning about polarized components
  • Makers prototyping small power supplies
  • Anyone stocking a general-purpose parts drawer

Buying Tip

Check the polarity marking on the capacitor body and the board silkscreen before soldering, because this part must be fitted the correct way round in a DC circuit.

Elecvora expert review

Our verdict

A simple, honest general-purpose capacitor that covers common smoothing and filtering jobs at a low cost. It is best treated as a basic consumable for through-hole builds and repairs rather than a precision component.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Useful 100uF value for supply smoothing and decoupling
  • 25V rating suits many low-voltage DC rails
  • Through-hole leads are easy to fit by hand
  • Wide -40 to 80 degrees Celsius operating range

Cons

  • Polarized, so it cannot be fitted either way round
  • 20% tolerance is normal but not precise
  • Only one capacitor is included per package

Best for

General-purpose through-hole DC filtering and repair work

Not ideal for

Precision timing or high-voltage applications

Specifications

ManufacturerGeneric
Capacitance100uF
Voltage Rating (V)25
Tolerance (%)20
Operating Temperature (°C)-40 ~ 80
Mounting TypeThrough Hole
Length (mm)7.5
Width (mm)6.6
Weight (g)4 each
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 100uF 25V Electrolytic Capacitor

Frequently Asked Questions

Is this capacitor polarized?
Yes. It is an aluminium electrolytic capacitor and must be connected with the correct polarity in a DC circuit.
What voltage can it handle?
It is rated at 25V DC, so the circuit voltage should remain below that value.
What is the tolerance?
The capacitance tolerance is 20%, which is typical for electrolytic capacitors.
How is it mounted?
It is a through-hole part, so the leads pass through the board and are soldered on the other side.
How many capacitors are included?
The package contains 1 x 100uF 25V Electrolytic Capacitor.
What temperature range does it support?
It is specified for operation from -40 to 80 degrees Celsius.

Overview

This aluminium electrolytic capacitor provides 100uF of capacitance with a 25V DC voltage rating in a radial through-hole package. It is a polarized component, so it must be connected with the correct polarity in a DC circuit. The part is aimed at everyday electronics work: smoothing a rectified supply, filtering noise, decoupling a stage or buffering a DC rail.

Key Features

  • 100uF capacitance with a 20% tolerance, a common value for supply smoothing and filtering.
  • 25V DC rating for low-voltage rails and general DC designs.
  • Through-hole mounting for hand assembly, prototyping and repair work.
  • Temperature range of -40 to 80 degrees Celsius for use in varied environments.
  • Compact body measuring 7.5mm in length and 6.6mm in width, about 4 grams each.

Specifications Explained

Capacitance tells you how much charge the part can store; 100uF is a versatile middle value often used to steady a supply rail. The 25V rating is the maximum DC working voltage for this part, so the circuit voltage should stay below it. Tolerance of 20% means the actual capacitance can vary within that band, which is normal for electrolytic types. The -40 to 80 degrees Celsius range describes the operating window, and through-hole mounting means leads pass through the board and are soldered on the reverse side.

Compatibility and Requirements

This is a polarized electrolytic capacitor and must be installed with the correct polarity in a DC circuit. It is a through-hole part, so it suits boards drilled for leaded components and hand or wave soldering rather than surface-mount pads. No other accessories are required to fit it.

Typical Uses

  • Input and output smoothing in small DC power supplies
  • Filtering and decoupling on low-voltage rails
  • Buffering DC links in hobby and prototype circuits
  • Repair and replacement work in through-hole equipment
  • Teaching and learning projects covering polarized capacitors

What's in the Box

Package includes 1 x 100uF 25V Electrolytic Capacitor.

Quick specs

Manufacturer
Generic
Capacitance
100uF
Voltage Rating (V)
25
Tolerance (%)
20
Operating Temperature (°C)
-40 ~ 80
Mounting Type
Through Hole
See all specifications