
1 / 3 · Click to enlarge
AI Summary
This 47uF 100V electrolytic capacitor is a through-hole component for smoothing and filtering in power supplies. Its 20% tolerance and -40 to 80°C range make it a dependable choice for repair and DIY projects.
Key Highlights
- 47uF capacitance with 100V DC voltage rating
- Aluminum electrolytic construction for power supply filtering
- Through-hole mounting for secure PCB installation
- 20% tolerance and -40°C to 80°C operating range
- Compact 12mm length and 8mm width
- Lightweight at 4g per capacitor
Ideal For
- Electronics repair technicians replacing worn capacitors
- DIY hobbyists building power supply circuits
- Students learning about through-hole components
- Makers prototyping DC-DC converters
- Audio enthusiasts restoring vintage gear
Buying Tip
Check the physical space and lead spacing on your PCB before ordering, and consider buying a few spares since electrolytic capacitors can degrade over time.
Elecvora expert review
Our verdict
A straightforward, general-purpose electrolytic capacitor that does its job without fuss. It is ideal for standard filtering and repair tasks where a 100V rating and moderate capacitance are needed.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Good voltage headroom for many low-voltage circuits
- Compact size fits tight spaces
- Wide operating temperature range
- Low weight, suitable for portable devices
- Standard 20% tolerance is adequate for most applications
Cons
- Polarized, so incorrect installation can damage the capacitor
- Not suitable for high-frequency or high-temperature environments above 80°C
- Lead spacing not specified, may require bending
Best for
General electronics repair and DIY power supply projects
Not ideal for
High-reliability or high-temperature applications
Specifications
| Manufacturer | Generic |
|---|---|
| Capacitance | 47uF |
| Voltage Rating (V) | 100 |
| Operating Voltage (VDC) | 100 |
| Tolerance (%) | 20 |
| Operating Temperature (°C) | -40 ~ 80 |
| Mounting Type | Through Hole |
| Length (mm) | 12 |
| Width (mm) | 8 |
| Weight (g) | 4 each |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 47uF 100V Electrolytic Capacitor
Frequently Asked Questions
Is this capacitor polarized?
What is the maximum voltage this capacitor can handle?
Can I use this capacitor in an AC circuit?
What is the tolerance of this capacitor?
How many capacitors are included?
What is the operating temperature range?
Overview
The 47uF 100V Electrolytic Capacitor is a radial through-hole component built for smoothing and buffering rectified DC voltages in electronic circuits. It uses aluminum electrolytic technology, where an aluminum oxide layer acts as the dielectric and a liquid electrolyte serves as the second electrode. This construction provides high capacitance in a small package, making it a practical choice for power supply filtering, decoupling, and DC-link applications. The capacitor is polarized, so correct polarity must be observed during installation.
Key Features
- 47uF capacitance: Provides ample energy storage for smoothing ripple in power rails.
- 100V DC rating: Suitable for circuits operating up to 100 volts DC, offering headroom for many common designs.
- 20% tolerance: Standard tolerance for electrolytic capacitors, balancing cost and performance.
- Through-hole mounting: Leads are designed for insertion into plated through-holes and soldering, ensuring a robust mechanical and electrical connection.
- Wide temperature range: Operates from -40°C to 80°C, covering most indoor and sheltered environments.
- Compact size: 12mm length and 8mm width allow dense PCB layouts.
Specifications Explained
Capacitance (47uF): This value determines how much charge the capacitor can store. 47 microfarads is a common value for filtering low-frequency ripple in power supplies and for coupling/decoupling signals.
Voltage Rating (100V): The maximum DC voltage the capacitor can handle continuously. Always derate for reliability; do not operate at or near the limit continuously.
Tolerance (±20%): The actual capacitance may vary by up to 20% from the nominal 47uF. This is typical for electrolytic capacitors and is acceptable for most filtering applications.
Operating Temperature (-40°C to 80°C): The capacitor can function within this range. Above 80°C, performance and lifespan may degrade.
Mounting Type (Through Hole): The capacitor has leads that pass through holes in the PCB and are soldered on the opposite side. This provides a strong physical bond.
Dimensions and Weight: At 12mm long and 8mm wide, with a weight of 4g each, it fits easily into compact designs and is light enough for airborne or portable applications where weight matters.
Compatibility and Requirements
This capacitor requires a PCB with through-hole pads spaced to match its lead spacing (not specified). It is polarized, so the positive lead must connect to the higher voltage side of the circuit. Ensure your circuit's DC voltage does not exceed 100V. No additional components are required for basic operation, but proper soldering equipment and technique are necessary for installation.
Typical Uses
- Smoothing and filtering in linear and switching power supplies
- Decoupling and bypass in DC-DC converters
- DC-link capacitors in small inverters or motor drives
- Repair and recapping of vintage electronics
- DIY audio and hobby projects requiring energy storage
What's in the Box
Package includes: 1 x 47uF 100V Electrolytic Capacitor.
Quick specs
- Manufacturer
- Generic
- Capacitance
- 47uF
- Voltage Rating (V)
- 100
- Operating Voltage (VDC)
- 100
- Tolerance (%)
- 20
- Operating Temperature (°C)
- -40 ~ 80











