
1 / 4 · Click to enlarge
AI Summary
A compact 7-in-1 OLED meter that measures DC voltage, current, power, energy, capacity, time and temperature in one device. The bright display and simple button control make it easy to monitor and log electrical parameters in real time.
Key Highlights
- 7-in-1 measurement: voltage, current, power, energy, capacity, time, temperature
- Voltage range 0–99.9V DC with ±(0.5% + 1 digit) accuracy
- Current range 0.00–20A DC with ±(1% + 2 digits) accuracy
- Bright OLED display for clear readings in low light
- Compact 48 x 29 mm, 19 g – fits tight spaces
- Single button cycles data sets and clears accumulated values
Ideal For
- RC hobbyists monitoring battery discharge
- DIY electronics enthusiasts building power projects
- Solar power experimenters checking panel output
- STEM educators demonstrating electrical measurements
- Makers testing DC-DC converters and power supplies
Buying Tip
Remember that this meter needs a separate power source for its own electronics – plan your wiring accordingly before installation.
Elecvora expert review
Our verdict
A handy, compact multi-meter for DC projects that delivers essential readings on a clear OLED screen. It is not a precision lab instrument, but for hobbyist and educational use it offers excellent value and versatility.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Seven functions in one small device
- Bright OLED display is easy to read
- Simple one-button operation
- Wide voltage and current ranges
- Lightweight and pocket-sized
Cons
- Requires separate power supply for meter operation
- Wiring diagram not included
- Accuracy is adequate but not lab-grade
Best for
DIY electronics and RC hobbyists needing affordable inline monitoring
Not ideal for
Professional calibration or high-precision industrial measurements
Specifications
| Width (mm) | 29 |
|---|---|
| Voltage Rating | 99.9VDC |
| Current Measuring Range DC | 0.00-20A |
| Power measurement range | 00.00 to 99.99W to 999.9W |
| Energy measurement range | 0 to 9999.9Wh |
| Voltage measurement accuracy | +/-(0.5% + 1 digit) |
| Current Measure Accuracy | +/-(1 + 2 digits) |
| Capacity measurement range | 00.00 to 99.999Ah |
| Length (mm) | 48 |
| Weight (g) | 19g |
| Time measurement range | 0 to 99h59min |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 4 × 4 × 3 cm |
What's in the box
- 1 x 100V 20A 7-in-1 OLED Digital Amp Volt Power Time Capacity Energy Temperature Tester
Frequently Asked Questions
What is the maximum voltage and current this tester can handle?
Does the tester come with a power supply?
Can I measure AC voltage or current with this meter?
How do I reset the accumulated energy, capacity and time values?
What is included in the package?
Is the temperature sensor built-in or external?
Overview
The Generic 100V 20A 7-in-1 OLED Digital Tester is a versatile inline meter that packs seven measurement functions into a tiny 48 x 29 mm module. It continuously displays DC voltage, current, power, energy, capacity, run time and temperature on a high-contrast OLED screen. Whether you are testing a battery pack, monitoring a solar panel output or checking the load on a DIY power supply, this tester gives you the data you need without bulky bench equipment.
Key Features
- Seven measurements in one: voltage (0–99.9V), current (0–20A), power (up to 999.9W), energy (0–9999.9Wh), capacity (0–99.999Ah), time (0–99h59min) and temperature (-15 to 60°C).
- Bright OLED display: clear readouts even in dimly lit workshops or enclosures.
- Simple one-button control: press to cycle through data sets; long-press to reset accumulated values.
- Compact and lightweight: measures just 48 x 29 mm and weighs 19 g, so it fits into tight spaces and portable setups.
- Wide application range: suitable for DC systems up to 99.9V and 20A, covering many hobbyist and small-scale projects.
Specifications Explained
Voltage (0–99.9V DC): Measures DC potentials up to 99.9V with ±(0.5% + 1 digit) accuracy, enough for 12V, 24V, 36V and 48V battery systems and most DIY electronics.
Current (0–20A DC): Handles up to 20A continuous, with ±(1% + 2 digits) accuracy. This covers typical loads from small motors, LED strips, RC chargers and power supplies.
Power (up to 999.9W): Calculates real-time power in watts, letting you see how much energy a device draws at any moment.
Energy (0–9999.9Wh) and Capacity (0–99.999Ah): Accumulate over time, so you can track total consumption or battery capacity used during a test session.
Time (0–99h59min): Logs run time, useful for discharge tests or monitoring equipment usage.
Temperature (-15 to 60°C): Built-in sensor reports ambient or probe temperature (depending on wiring) to help spot overheating.
Compatibility and Requirements
The tester requires a separate power source for its own operation – it can be powered from an isolated supply, the system under test, or a DC converter. Proper wiring according to the supplied diagram is essential to avoid incorrect readings or damage. The unit is designed for DC systems only, with a maximum voltage of 99.9V and maximum current of 20A. No additional cables or accessories are included unless specified.
Typical Uses
- Monitoring battery discharge and capacity in RC models and power banks.
- Checking current draw and power consumption of DIY electronic projects.
- Verifying solar panel output and charge controller performance.
- Testing power supplies, DC-DC converters and LED lighting setups.
- Educational demonstrations of electrical principles in STEM learning.
What's in the Box
Package includes: 1 x 100V 20A 7-in-1 OLED Digital Amp Volt Power Time Capacity Energy Temperature Tester. (Wiring diagram and instructions not included unless stated.)

Quick specs
- Width (mm)
- 29
- Voltage Rating
- 99.9VDC
- Current Measuring Range DC
- 0.00-20A
- Power measurement range
- 00.00 to 99.99W to 999.9W
- Energy measurement range
- 0 to 9999.9Wh
- Voltage measurement accuracy
- +/-(0.5% + 1 digit)













