Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

Ten 20 cm jumper wires with insulated alligator clips on one end and female Dupont connectors on the other, colour-coded in five colours. They let you clip onto bare wires or test points and plug straight into male headers for fast, solder-free connections.

Key Highlights

  • 10 jumper wires with alligator clips and female Dupont ends
  • 20 cm cable length for short, tidy bench connections
  • Insulated crocodile clips with 22.6 mm clip length
  • Five colours: red, black, yellow, blue and white
  • Colour coding helps trace circuits and avoid shorts
  • Lightweight set, easy to store in a tool kit

Ideal For

  • Electronics students building circuits in school or university labs
  • Makers prototyping on breadboards with male headers
  • Repair technicians probing test points on small devices
  • Hobbyists assembling DIY projects without soldering
  • Anyone needing temporary colour-coded test leads

Buying Tip

Check that your target board or module uses male Dupont pins, since the female connectors on these leads will not plug directly into female headers.

Elecvora expert review

Our verdict

A straightforward, useful set of short clip-to-Dupont leads for bench testing and quick prototyping. The colour coding and insulated clips make it easy to keep connections organised without soldering.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Colour-coded leads simplify circuit tracing
  • Insulated alligator clips reduce accidental shorts
  • Female Dupont ends plug directly onto male headers
  • Compact 20 cm length keeps bench wiring tidy

Cons

  • Female connectors will not fit female headers without an adapter
  • Short 20 cm length may be limiting for larger setups
  • Clips are not designed for high-current or permanent connections

Best for

Students, makers and technicians doing temporary low-voltage bench tests and breadboard prototyping.

Not ideal for

Permanent wiring, high-power circuits or applications requiring long test leads.

Specifications

Jumper TypeFemale
Clip TypeAlligator
Additional Specs.Clip length(mm): 22.6 mm
Cable Length20 CM
ColorRed, Black, Yellow, Blue, White
Shipping Weight0.04 kg
Shipping Dimensions7 × 4 × 2 cm

What's in the box

  • 1 x 10-pin alligator clip jumper wire set with female Dupont connectors, 20 cm, in five colours

Frequently Asked Questions

What can I connect these jumper wires to?
The alligator clips grip bare wires, component leads and small terminals, while the female Dupont connectors plug onto male header pins. They are intended for temporary test and prototyping connections.
Are the clips insulated?
Yes, each alligator clip has a plastic insulation cover in one of five colours. The cover helps reduce the risk of accidental contact between nearby connections.
Can I use these with a breadboard?
Yes, if your breadboard setup uses male Dupont pins or jumper wires with exposed male ends. The female Dupont connector on these leads pushes onto male pins.
What is the maximum voltage or current?
The product data does not specify voltage or current ratings. Use them for low-voltage testing and prototyping only, and avoid high-power circuits.
How many wires are included and what colours?
The set includes 10 jumper wires in red, black, yellow, blue and white. Each wire is 20 cm long with a 22.6 mm alligator clip.
How should I care for the jumper wires?
Keep the clips clean and dry, avoid pulling on the cable when disconnecting, and store the leads loosely coiled to prevent tangles and insulation damage.

Overview

This set of 10 jumper wires is designed for quick, temporary electrical connections. Each lead has an insulated alligator clip at one end and a female Dupont connector at the other, with a 20 cm cable between them. The clips are colour-coded in red, black, yellow, blue and white, so you can identify each connection at a glance while working on a circuit.

Because one end clips onto bare wire, terminals or test points and the other plugs onto standard male Dupont headers, the set bridges the gap between loose components and pinned boards. It is a practical accessory for bench testing, classroom experiments, repair work and DIY electronics where soldering would be slow or inconvenient.

Key Features

  • Clip-and-plug design: alligator clip on one end, female Dupont connector on the other.
  • 20 cm leads: short enough to keep wiring tidy on a bench or in a small enclosure.
  • Insulated clips: plastic covers on the crocodile clips help reduce accidental contact between adjacent connections.
  • Five colours: red, black, yellow, blue and white for easy circuit tracing.
  • 10 pieces per set: enough for multi-point testing or small projects.
  • Lightweight: the whole set weighs about 0.04 kg and packs into a small space.

Specifications Explained

Jumper type: female Dupont connectors mean these leads plug onto male pins, such as those on breadboard jumpers, sensor boards or pin headers. They are not designed to mate with female headers.

Clip type: alligator clips open and grip bare conductors, component legs, screw terminals or test points. The clip body measures 22.6 mm, giving a useful jaw size for small to medium connections.

Cable length: 20 cm is a practical length for bench work. It keeps leads from tangling while still allowing enough reach between nearby components.

Colour coding: using five distinct colours helps you follow signal and power paths and reduces the chance of mixing up connections during testing.

Compatibility and Requirements

The female Dupont ends are intended for male pins with a standard Dupont spacing. The alligator clips work with bare wires, exposed component leads and small terminals. No soldering is required for basic use, but the clips need a conductive surface to grip. The set does not include any power source, test instrument or additional adapters.

Typical Uses

  • Quick circuit assembly in school physics or electronics labs.
  • Temporary links between a breadboard and off-board components.
  • Bench testing of sensors, modules and small DC circuits.
  • Holding small parts together during gluing or soldering setup.
  • Repair and diagnostic work where test points are hard to reach.

What's in the Box

The package contains one set of 10-pin alligator clip jumper wires with female Dupont connectors, 20 cm, in five colours.

Quick specs

Jumper Type
Female
Clip Type
Alligator
Additional Specs.
Clip length(mm): 22.6 mm
Cable Length
20 CM
Color
Red, Black, Yellow, Blue, White
Shipping Weight
0.04 kg
See all specifications