Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A pack of five red 5 mm LED indicator lights in metal housings, rated 12 to 18 V and supplied with 20 cm cables. Each one gives a clear power or status signal and installs easily in panels and DIY circuits.

Key Highlights

  • Pack of five matched red 5 mm LED indicator lights
  • Rated for 12 to 18 V DC supply ranges
  • Pre-attached 20 cm cable on each unit
  • Compact metal housing fits tight panel space
  • Very light at 0.001 kg shipping weight
  • Low-power LED light generation for status signalling

Ideal For

  • Hobbyists building status panels for DIY electronics
  • Repair technicians replacing worn indicator lamps
  • Makers wiring power-on lights into enclosures
  • Small production runs needing matched red indicators
  • Students learning basic circuit indication

Buying Tip

Confirm your supply voltage stays within 12 to 18 V and check LED polarity before soldering, since the pack gives you five units but no separate resistors or connectors.

Elecvora expert review

Our verdict

A straightforward, low-cost way to add red status indication to 12 to 18 V circuits, supplied in a handy five-pack with cables already attached. The metal housing and compact 5 mm LED suit panel work, though you must confirm current limiting in your own design.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Five matched units per pack
  • Cable pre-attached on every light
  • Compact 5 mm LED in a metal housing
  • Rated for a useful 12 to 18 V range
  • Very light, so easy to ship and store

Cons

  • No current rating or resistor specified in the product data
  • Only a 20 cm cable, so longer runs need a join
  • Mounting hardware is not listed

Best for

Panel and DIY status indication on 12 to 18 V circuits

Not ideal for

Applications needing a documented current rating or certified rating

Specifications

ColorRed
Voltage Rating (V)12 to 18
Size (mm)5
Additional Specs.Cable
Cable Length20
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 5 x 12-18V 5MM Red LED Indicator Light with 20CM Cable

Frequently Asked Questions

What voltage do these indicator lights need?
They are rated for supplies between 12 and 18 V. Keep your circuit within that range and check polarity when wiring.
How many lights come in the pack?
The pack contains five red 5 mm LED indicator lights, each with a 20 cm cable attached.
Can I use them on a lower-voltage circuit?
The product data only states a 12 to 18 V rating, so operation below or above that range is not specified. Match your supply to the stated range.
Do I need a resistor?
The product data does not list a current rating or resistor requirement. Confirm the correct current limiting for your supply in your own circuit design.
How long is the cable?
Each indicator comes with a 20 cm cable. For longer distances, join the lead to your own wiring at a terminal or soldered joint.
How should I care for them?
Keep the LED and metal housing dry, avoid exceeding the rated voltage, and check cable joints periodically for looseness or damage.

Overview

These red LED indicator lights are designed to show the operating state of circuits, panels and mechanical equipment at a glance. Each unit combines a 5 mm red LED with a metal housing and a 20 cm cable already attached, so you can wire it into a project without hunting for extra leads. The pack contains five units, which is handy when you need matching indicators across several positions on the same build.

LEDs turn electrical energy directly into light rather than heating a filament first, so they generate efficient light with little wasted electricity. That makes these indicators a practical choice for status lamps that stay on for long periods.

Key Features

  • Red 5 mm LED: a clear, familiar colour for power-on and fault indication.
  • 12 to 18 V rating: matched to common low-voltage DC circuits and control panels.
  • 20 cm cable: enough lead length for most panel and enclosure layouts.
  • Metal housing: a tidy, durable body for mounting through a panel.
  • Five per pack: enough for multi-indicator builds or spares.
  • Light weight: shipping weight is just 0.001 kg, so it adds almost nothing to a parcel.

Specifications Explained

Voltage

The 12 to 18 V rating tells you the supply range the indicator is intended for. Check your circuit voltage sits inside that window before connecting the light, and confirm the polarity of your supply when wiring the LED.

LED size

At 5 mm, the LED is small enough for compact panels and dense layouts while still being visible as a status light. Plan a mounting hole that suits the metal housing and the way it is fixed to your panel.

Cable

Each light comes with a 20 cm cable, giving you a short run from the indicator to your connection point. If your wiring distance is longer, plan a join or terminal block rather than stretching the lead.

Compatibility and Requirements

Use these indicators with a supply within the stated 12 to 18 V range. The product data does not specify a current rating, resistor requirement or connector type, so confirm those details against your own circuit design before installation. The 20 cm cable is the only connection hardware supplied.

Typical Uses

  • Power-on and status indicators on control panels and enclosures
  • Circuit monitoring and simple alarm indication on equipment
  • DIY electronics, hobby builds and repair projects
  • Electronic signs, clock displays and small gadget lighting
  • Replacement indicators on existing low-voltage equipment

What's in the Box

The pack contains five red 5 mm LED indicator lights, each with a 20 cm cable attached.

Quick specs

Color
Red
Voltage Rating (V)
12 to 18
Size (mm)
5
Additional Specs.
Cable
Cable Length
20
Shipping Weight
0.001 kg
See all specifications