Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A pack of five 3V 5mm water clear RGB slow flash LED indicators, each pre-wired with a 20cm cable. The slow colour-cycling flash makes them a simple status or accent light for panels and small electronics builds.

Key Highlights

  • Pack of five pre-wired RGB slow flash LED indicators
  • 5mm water clear lens for a bright, clean colour output
  • 3V rating suits low-voltage DC circuits and projects
  • 20cm cable allows flexible routing to panels and enclosures
  • Slow flash cycle creates a gentle repeating colour change
  • Lightweight design is easy to mount in tight spaces

Ideal For

  • Makers building small electronic projects with 3V DC supplies
  • Hobbyists adding status or accent lighting to enclosures
  • Technicians replacing indicator lights on panels
  • Students learning about LED indicators and low-voltage circuits
  • Model builders wanting a cycling colour light effect

Buying Tip

Confirm your project can supply 3V DC and plan how you will join the pre-attached 20cm cable to your circuit before mounting the LED.

Elecvora expert review

Our verdict

A straightforward pre-wired indicator option for low-voltage projects where a cycling colour signal is wanted. The pack of five and 20cm cables make them convenient for multi-point builds, provided your circuit supplies the stated 3V.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Pre-wired with 20cm cable for easier installation
  • Slow flash RGB effect adds visible status signalling
  • Pack of five suits multiple indicator points
  • Compact 5mm size fits small panels

Cons

  • Requires a 3V DC supply matched to the rating
  • Cable ends still need joining to your circuit
  • Slow flash may not suit applications needing a steady light

Best for

Low-voltage electronics projects needing a cycling colour indicator

Not ideal for

Higher-voltage circuits or applications requiring a constant steady light

Specifications

Voltage Rating (V)3
Size (mm)5
Additional Specs.Cable
Model No. / NameSlow Flash LED Indicator
Cable Length20 CM
LED Size (mm)5
ColorRGB
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 5 x 3V 5mm Water Clear RGB Slow Flash LED Indicator Lights with 20cm Cable

Frequently Asked Questions

What voltage do these LED indicators need?
They are rated at 3V, so they should be used with a suitable 3V DC supply. Do not connect them directly to higher voltages.
How long are the cables?
Each indicator has a 20cm cable attached, giving flexibility when routing to a panel or enclosure.
What does slow flash mean?
The RGB LED cycles through colours in a gradual repeating pattern rather than staying on one colour.
How many indicators are included?
The pack contains five RGB slow flash LED indicators, each with its own 20cm cable.
Are these suitable for panel mounting?
The 5mm LED size suits small indicator openings, but you should check your panel hole size before fitting.
Do I need to solder the connections?
The LED comes pre-wired, but the cable ends must be joined to your circuit using a method suited to your build.

Overview

These 3V 5mm water clear RGB slow flash LED indicator lights are pre-wired components for adding a cycling colour signal to electronic projects. Each LED is supplied with a 20cm cable, which makes it easier to position the light at a panel, enclosure or display point while the connection stays further inside the build. The water clear lens keeps the output clean and bright, and the slow flash pattern gives a repeating colour change rather than a fixed colour.

Supplied as a pack of five, they suit multi-point indication, spare parts and small batches of builds where several indicators are needed.

Key Features

  • RGB slow flash output with a repeating colour cycle
  • 5mm LED size for compact indicator positions
  • 3V voltage rating for low-voltage DC use
  • 20cm cable attached for flexible placement
  • Water clear lens for clear colour visibility
  • Pack of five units per order

Specifications Explained

Voltage rating

The 3V rating tells you these indicators are intended for low-voltage DC circuits. Match the supply to the rating rather than connecting them directly to higher voltages.

LED size

At 5mm, the LED fits standard small indicator openings and panel holes, so it can sit neatly in a front plate or enclosure.

Cable length

The 20cm cable gives useful reach between the LED position and the connection point inside your project, reducing the need for extra wire runs.

Slow flash behaviour

Slow flash means the RGB colours change in a gradual repeating cycle. This is useful where you want an attention-drawing status light rather than a steady single-colour glow.

Compatibility and Requirements

These indicators require a 3V DC supply and a suitable connection to your circuit. The pre-attached 20cm cable must be joined to your wiring or power source. No other ratings, certifications or compatibility details are specified for this product.

Typical Uses

  • Status and power indication on small electronic devices
  • Panel and enclosure indicator points
  • Hobby electronics and breadboard-adjacent builds
  • Decorative colour accents in model and maker projects
  • Educational circuit demonstrations

What's in the Box

Five RGB slow flash LED indicators, each with a 20cm cable.

Quick specs

Voltage Rating (V)
3
Size (mm)
5
Additional Specs.
Cable
Model No. / Name
Slow Flash LED Indicator
Cable Length
20 CM
LED Size (mm)
5
See all specifications