
1 / 5 · Click to enlarge
AI Summary
A keyed 12V/24V battery disconnect isolator rated at 100A continuous and 750A intermittent for five minutes. It cuts battery power for maintenance or storage and includes two keys, four copper rings and heat shrink.
Key Highlights
- Keyed ON/OFF operation prevents unauthorised power restoration
- 100A continuous and 750A intermittent current for five minutes
- Heavy-duty brass terminals with 5/16 inch ring terminal size
- Waterproof cover shields contacts from dust and moisture
- Stainless steel mounting hardware resists corrosion
- Includes two keys, four copper rings and four heat shrink pieces
Ideal For
- Vehicle owners storing a car or RV for long periods
- Boat and marine owners needing a quick battery cut-off
- Home mechanics working on 12V or 24V electrical systems
- Owners of battery-powered equipment wanting keyed isolation
- Drivers adding a simple anti-drain security measure
Buying Tip
Measure your existing cable lug bore and mounting surface before ordering, and confirm they match the 5/16 inch terminal size and 3/16 inch mounting hole.
Elecvora expert review
Our verdict
A straightforward, well-equipped isolator for anyone who wants keyed battery isolation without a complex install. The current ratings and included fitting extras make it a practical choice for cars, boats and RVs.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Keyed operation adds a simple security layer
- 100A continuous and 750A intermittent ratings suit starting loads
- Brass terminals and stainless hardware resist wear and corrosion
- Waterproof cover protects against dust and moisture
- Includes two keys, copper rings and heat shrink
Cons
- Cables and battery lugs are not included
- Mounting fasteners beyond the described hardware may be needed for some surfaces
- Keyed design means the key must be kept accessible to restore power
Best for
Owners of cars, boats and RVs who want a keyed battery cut-off for storage and maintenance
Not ideal for
High-voltage or AC electrical systems, or setups needing remote or automated switching
Specifications
| Shipping Weight | 0.195 kg |
|---|---|
| Shipping Dimensions | 10 × 7 × 7 cm |
What's in the box
- 1 x 12V/24V car battery power switch disconnect isolator, black
- 2 x keys
- 4 x copper rings
- 4 x heat shrink pieces
Frequently Asked Questions
Does this switch work on both 12V and 24V systems?
How much current can it handle?
What is included with the switch?
Can I use it to stop battery drain during storage?
What size are the terminals and mounting holes?
Is the switch protected from weather?
Overview
This battery power switch disconnect isolator gives you a physical, keyed way to cut power from a 12V or 24V DC battery system. Instead of loosening a terminal clamp every time you park up for storage or work on the electrical system, you turn the key and the circuit opens. The switch is built for practical workshop and vehicle use, with brass terminals for conductivity and stainless steel mounting hardware that resists corrosion over time.
A waterproof cover sits over the working parts to keep dust and moisture away, which matters on vehicles stored outdoors or in damp garages. Two keys are supplied, so you can keep a spare in a safe place.
Key Features
- Keyed ON/OFF control: the switch cannot be operated without the key, helping prevent unwanted battery drain and casual tampering.
- Dual voltage support: designed for 12V and 24V DC systems.
- High current handling: 100A continuous with a 750A intermittent rating for up to five minutes.
- Brass ring terminals: 5/16 inch terminal size for secure cable connections.
- Protective cover: waterproof design shields the switch from dust and moisture.
- Complete fitting kit: two keys, four copper rings and four heat shrink pieces included.
Specifications Explained
The 100A continuous rating is the load the switch can carry indefinitely, so it suits normal vehicle circuits and moderate accessory draw. The 750A intermittent figure covers short bursts of up to five minutes, which is the kind of demand seen during engine cranking or heavy transient loads. The ON-OFF-ON operation mode and normally closed contact type define how the switch behaves in the circuit. The 5/16 inch ring terminal size and 3/16 inch mounting hole are the key measurements to check against your cable lugs and mounting surface. The 60mm base diameter, 1.25 inch post height and 36.5mm feet spacing help you plan the mounting position. Working temperature is rated from 40 to 80 degrees Celsius, and the unit weighs 188g.
Compatibility and Requirements
The switch is intended for DC 12V and 24V battery systems. It is not a voltage converter, so it does not change system voltage; it simply opens and closes the circuit. Cables, lugs and mounting fasteners are not included beyond the copper rings and heat shrink, so check that your existing ring terminals match the 5/16 inch terminal size. Installation requires basic hand tools and a suitable mounting location within reach of the battery cable.
Typical Uses
Common applications include cars, boats, RVs and other battery-powered systems that benefit from a repeatable power cut. It is useful during maintenance, for seasonal storage, and wherever you want to isolate the battery quickly without disconnecting terminals by hand.
What's in the Box
- 1 x 12V/24V car battery power switch disconnect isolator, black
- 2 x keys
- 4 x copper rings
- 4 x heat shrink pieces













