Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 40mm 12V axial fan rated at 7000 RPM and 1.36 CFM, built for 3D printer extruder cooling and general purpose airflow. The 0.27 m lead with PH2.0-2P connector plugs straight into a compatible printer controller.

Key Highlights

  • 40 x 40 mm footprint fits compact extruder and hotend mounts
  • 12 VDC input at 0.15 A for low current draw
  • Rated 7000 RPM speed with 1.36 CFM airflow
  • Rated noise around 23 dBA for quieter printing sessions
  • 0.27 m cable with PH2.0-2P connector for direct hookup
  • Lightweight at 15 g to avoid stressing small mounts

Ideal For

  • 3D printer owners replacing a worn 40 mm extruder fan
  • Makers building custom hotend cooling ducts
  • Hobbyists needing a small 12 V fan for electronics enclosures
  • Repair technicians servicing compact printer assemblies
  • DIY builders working on general purpose airflow projects

Buying Tip

Measure your existing fan mount and confirm the controller output is 12 V and uses a PH2.0-2P plug before ordering, since this fan is a general purpose part rather than a model-specific drop-in.

Elecvora expert review

Our verdict

A straightforward 40 mm 12 V fan with sensible ratings for extruder cooling and light general purpose work. It is a practical spare for anyone who already has a 12 V fan header with a PH2.0-2P plug.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 40 x 40 mm size suits tight extruder mounts
  • Low 0.15 A current draw
  • Rated 7000 RPM with 1.36 CFM airflow
  • Plug-in PH2.0-2P connector simplifies wiring
  • Rated 35,000 hour service life

Cons

  • Requires a 12 V supply, so 24 V printer outputs need a different solution
  • Modest 1.36 CFM airflow limits use to close-range cooling
  • Package contents are not specified for this listing

Best for

Extruder and hotend cooling on 3D printers with 40 mm mounts and 12 V fan headers

Not ideal for

Printers whose fan headers output 24 V without a step-down converter

Specifications

Item TypeCooling Fan
CompatibilityGeneral Purpose
MaterialHQ Plastic
ColorBlack
Input Voltage (VDC)12
Operating Current (A)0.15
Cable Length0.27
Noise (dB)23dBA±10%
Connector TypePH2.0-2P
Rated Speed (RPM)7000
Air Flow1.36CFM
Service life3,5000 hours
Length (mm)40
Width (mm)40
Weight (g)15
Shipping Weight0.04 kg
Shipping Dimensions5 × 5 × 2 cm

Frequently Asked Questions

What voltage does this fan need?
It is rated for 12 VDC input and draws 0.15 A. Do not connect it to a 24 V output.
What connector does the fan use?
The 0.27 m cable ends in a PH2.0-2P connector, which fits compatible controller fan ports.
How much air does it move?
The rated airflow is 1.36 CFM at a rated speed of 7000 RPM.
How loud is the fan?
The rated noise level is 23 dBA with a tolerance of plus or minus 10 percent, so expect slight variation between units.
What is included in the package?
Package contents are not specified for this listing, so confirm the quantity before ordering.
How should I care for the fan?
Keep the blades and frame free of dust and debris, and make sure the lead is routed away from hot parts of the extruder.

Overview

The Generic 12V 4010 Cooling Fan is a small square axial fan intended for 3D printer extruder cooling and other general purpose airflow tasks. Its 40 x 40 mm frame and 15 g weight let it sit on compact hotend brackets and custom ducts where a larger fan would not fit. Power comes from a 12 VDC supply, and the fan draws 0.15 A, so it is easy to run from a printer controller that already provides a 12 V fan output.

The 0.27 m lead terminates in a PH2.0-2P connector, matching controllers that use that plug style. Once connected, the printer controller switches the fan on and off as part of its normal operation, so no separate switch is needed.

Key Features

  • Compact 40 mm frame: a 40 x 40 mm body that fits tight extruder assemblies.
  • 12 VDC operation: runs at 0.15 A on a 12 V supply.
  • Rated 7000 RPM: high rotational speed in a small package.
  • 1.36 CFM airflow: focused airflow for part and heatsink cooling.
  • Rated 23 dBA noise: modest sound output for everyday printing.
  • PH2.0-2P connector: plugs into compatible controller fan ports.

Specifications Explained

Voltage and current: the fan is rated for 12 VDC input and 0.15 A operating current. Check that your controller's fan header supplies 12 V before connecting, since a 24 V output is not suitable for this part.

Speed and airflow: the rated 7000 RPM produces about 1.36 CFM. That is a modest volume of air, best used close to the surface being cooled, such as a heatsink or a printed part.

Noise: the rated 23 dBA figure is a nominal value with a tolerance of plus or minus 10 percent, so real-world sound will vary slightly between units and mounting conditions.

Cable and connector: the 0.27 m lead gives enough length to reach a nearby controller port, and the PH2.0-2P plug keeps wiring tidy.

Service life: the fan is rated for 35,000 hours of service, which supports long-term use in a printer that runs regularly.

Compatibility and Requirements

This is a general purpose fan rather than a model-specific replacement. It requires a 12 VDC power source and a controller port or adapter that accepts a PH2.0-2P connector. Confirm the mounting hole pattern and clearance on your extruder before fitting. The fan is supplied in black HQ plastic.

Typical Uses

  • Extruder and hotend cooling on 3D printers with 40 mm fan mounts
  • Custom printed fan ducts and shroud builds
  • Cooling small electronics enclosures and driver boards
  • General purpose 12 V ventilation in hobby projects

What's in the Box

Package contents are not specified for this listing. Check the package details before ordering if you need a specific quantity.

Quick specs

Item Type
Cooling Fan
Compatibility
General Purpose
Material
HQ Plastic
Color
Black
Input Voltage (VDC)
12
Operating Current (A)
0.15
See all specifications