Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 1 meter flexible 12V RGB 5050 SMD LED strip that draws 14.4W per meter and needs a separate 12V adapter plus RGB controller. Its 10mm IP20 tape bends around curves for indoor accent and display lighting.

Key Highlights

  • 1 meter flexible 5050 SMD RGB LED strip
  • 12V DC operation with 14.4W per meter draw
  • Requires at least 2A supply for full length
  • 120 to 140 degree wide viewing angle
  • IP20 rated for dry indoor installations
  • Bends to follow curves and corners

Ideal For

  • Makers building indoor accent and display lighting
  • Hobbyists adding colour effects to models and props
  • Installers fitting dry indoor decorative lighting
  • Users who already own a 12V RGB controller
  • Small projects needing a short flexible RGB run

Buying Tip

Check that your 12V adapter can supply at least 2A for this 1 meter strip, and add up the current if you plan to link more strips end to end.

Elecvora expert review

Our verdict

A compact, flexible RGB strip that works well for small indoor projects where colour control matters. It is honest about its limits: accent-level output, dry-use only, and it needs a separate adapter and controller.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Flexible tape follows curves and corners
  • Separate R, G and B circuits support colour mixing with a controller
  • Wide 120 to 140 degree viewing angle
  • Light 13g strip and 10mm width suit small builds

Cons

  • Adapter and 4-pin controller are not included
  • IP20 rating limits use to dry indoor locations
  • Output of 30 to 40 lumens per meter is accent-level only

Best for

Indoor accent, display and hobby lighting with a 12V RGB controller

Not ideal for

Outdoor or wet locations, or users wanting individually addressable pixels

Specifications

Item TypeLED Strip
Operating Voltage (VDC)12
LED Glow ColorRGB (Red-Green-Blue)
Weight (g)13
Max. Operating Current (A)2000 (for 1 Meter Length)
Power Reqd./Meter (W)14.4
Protection StandardIP20
Strip Length (meter)1
Strip Size (mm)10
Total Luminous Flux30-40LM/Meter
Viewing Angle (Deg.)120 ° ~ 140 °
Operating Temperature (°C)- 25 to 65
Shipping Weight0.017 kg
Shipping Dimensions10 × 8 × 2 cm

What's in the box

  • 1 x 12V RGB 5050 SMD LED Strip, 1 meter

Frequently Asked Questions

What power supply does this strip need?
It runs from 12V DC and draws up to 2A over the 1 meter length. Choose an adapter rated for at least 2A, and increase that if you connect more strips.
Are the LEDs individually addressable?
No. Each colour has its own 12V circuit, giving three circuits for red, green and blue. Colour mixing and patterns come from an RGB controller, not from individual pixels.
Is a controller or adapter included?
No. The 12V adapter and the 4-pin socket are not included, so you need to buy them separately.
Can I use the strip outdoors?
No. It has IP20 protection, which is intended for dry indoor use. Keep it away from moisture and splashes.
Can I connect several strips together?
Yes, strips can be connected end to end, but the current requirement adds up. Size your 12V adapter for the total load of all connected lengths.
How bright is the strip?
Total luminous flux is 30 to 40 lumens per meter with a 120 to 140 degree viewing angle. Treat it as accent lighting rather than main room illumination.

Overview

This is a 1 meter length of flexible RGB LED strip built on 5050 SMD modules. Each module carries red, green and blue diodes, giving you a colour-changing light source that responds to an RGB controller. The strip runs from 12V DC and is supplied as a single 1 meter piece with a 10mm wide profile.

Because the strip is flexible, it can follow curves and corners rather than being limited to straight runs. That makes it a practical choice for accent lighting, display pieces, model work and enclosure lighting where a rigid fixture would not fit.

Key Features

  • RGB colour output: red, green and blue diodes on separate 12V circuits allow colour mixing and effects when paired with a controller.
  • 5050 SMD modules: each module carries three colour diodes for bright, saturated light.
  • Flexible tape: bends to conform to curves and corners.
  • Wide viewing angle: 120 to 140 degrees spreads light across a broad area.
  • Compact size: 10mm strip width and 13g strip weight keep the build light.

Specifications Explained

Voltage and current: the strip operates at 12V DC and draws up to 2A across the 1 meter length. Power required per meter is 14.4W. A supply that cannot deliver this current may cause dimming toward the far end or uneven colour, so match the adapter to the load.

Protection rating: IP20 means the strip is intended for dry indoor locations. Keep it away from moisture, splashes and outdoor exposure.

Luminous flux and angle: total output is 30 to 40 lumens per meter with a 120 to 140 degree viewing angle. This is accent-level light rather than general room illumination.

Operating temperature: the strip is rated for -25 to 65 degrees Celsius, so it suits normal indoor environments and enclosed projects within that range.

Compatibility and Requirements

The strip is not individually addressable. Each colour has its own 12V circuit, giving three circuits in total (R, G and B). You can run the strip from a plain 12V DC supply if you do not need colour mixing or flashing patterns. For colour control and effects, an RGB controller is required.

A 12V adapter and a 4-pin socket are not included. The strip needs a supply rated for at least 2A to power the full 1 meter length. Connecting multiple strips end to end increases the current requirement, so size the adapter for the total load.

Typical Uses

  • Indoor accent lighting behind shelves and displays
  • Model, prop and enclosure lighting
  • Hobby and maker projects needing colour effects
  • Decorative lighting for dry indoor spaces

What's in the Box

1 x 12V RGB 5050 SMD LED Strip, 1 meter.

Quick specs

Item Type
LED Strip
Operating Voltage (VDC)
12
LED Glow Color
RGB (Red-Green-Blue)
Weight (g)
13
Max. Operating Current (A)
2000 (for 1 Meter Length)
Power Reqd./Meter (W)
14.4
See all specifications