
1 / 5 · Click to enlarge
AI Summary
A 5 metre WS2812B addressable RGB LED strip running on 5V with 60 individually controllable pixels per metre. Its IP67 waterproof build lets you take those per-pixel effects outdoors or into damp environments.
Key Highlights
- 5 metre strip with 60 addressable WS2812B LEDs per metre
- Each pixel controls colour and brightness independently via one-wire interface
- IP67 waterproof rating for outdoor and damp installations
- Runs on a 5V supply with up to 90W maximum power draw
- Flexible 12 mm wide strip with 4.6 mm thickness for curved routes
- 24-bit colour control for 16.8 million colours per pixel
Ideal For
- Makers and Arduino users building addressable lighting projects
- Lighting designers creating animated accent and display lighting
- Installers needing a waterproof strip for outdoor or damp locations
- Prop, costume and stage builders wanting per-pixel colour effects
- Hobbyists adding dense 60 LED/m runs to furniture and shelving
Buying Tip
Check that your 5V power supply and wiring can handle the strip's 90W maximum draw before connecting the full 5 metres at full brightness.
Elecvora expert review
Our verdict
A solid choice when you need dense, individually addressable pixels over a long run and the installation may get wet. The IP67 build and 60 LEDs per metre are the standout points, provided you plan the 5V power side carefully.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 60 LEDs per metre gives smooth, detailed effects
- IP67 waterproof rating opens up outdoor and damp use
- Each pixel is independently addressable for full creative control
- Flexible 12 mm strip fits curves and narrow profiles
Cons
- Requires a separate 5V power supply and microcontroller
- Strict one-wire timing means you need a suitable library
- Full-brightness white draws heavily on the 90W maximum
Best for
Addressable outdoor and accent lighting projects with a 5V controller
Not ideal for
Plug-and-play users who want a simple remote-controlled colour strip
Specifications
| Item Type | LED Strip |
|---|---|
| Color | White |
| Strip Length (meter) | 5 |
| Max. Power (W) | 90 |
| Width (mm) | 12 |
| Thickness (mm) | 4.6 |
| Protection Standard | IP67 |
| Waterproof Rating | Yes |
| Storage Temperature (°C) | -40 to 80 |
| Operating Temperature (°C) | -25 to +60 |
| Weight (g) | 20 |
| Shipping Weight | 0.375 kg |
| Shipping Dimensions | 20 × 20 × 1 cm |
What's in the box
- 1 x WS2812B 5V Addressable RGB Waterproof LED Strip, 5m
Frequently Asked Questions
What voltage does this LED strip need?
Can I control each LED separately?
Is the strip suitable for outdoor use?
What controller do I need?
How many LEDs are on the strip?
What is included with the strip?
Overview
The WS2812B 5V Addressable RGB LED Strip gives you a 5 metre run of individually controllable RGB pixels. Instead of one colour for the whole strip, every LED on this strip carries its own integrated driver, so colour and brightness can be set pixel by pixel through a single-wire digital control interface. With 60 LEDs per metre, the pixel density is high enough for smooth gradients, tight animations and clean chasing effects.
The strip is rated IP67, meaning it is waterproof and can be used in outdoor or damp locations where a standard bare strip would not survive. It is flexible, 12 mm wide and 4.6 mm thick, so it can follow curves and fit into channels, profiles and enclosures.
Key Features
- Addressable pixels: each WS2812B LED combines a 5050 RGB LED with its own driver IC for independent control.
- 60 LEDs per metre: 5 metres of dense pixel spacing for detailed effects.
- 24-bit colour: 8-bit PWM per channel gives 16.8 million colours per pixel.
- One-wire interface: a single data line carries control signals along the strip.
- IP67 waterproof: suited to outdoor and wet-environment installations.
- 5V operation: runs from a 5V supply, with a maximum power figure of 90W for the strip.
Specifications Explained
5V supply: the strip is designed around a 5V rail, so your power source and wiring need to match that voltage. 90W maximum: this is the upper power figure for the strip, which matters when you plan power injection and choose a supply. 60 LEDs per metre: higher density means finer effects but also more current per metre, so plan wiring accordingly.
IP67: the strip is waterproof, so splashes, rain and damp environments are within its intended use. Operating temperature -25 to +60°C and storage -40 to 80°C define the range in which it should be used and kept. 12 mm width and 4.6 mm thickness are useful when checking fit inside aluminium profiles or narrow enclosures.
Compatibility and Requirements
The strip uses a one-wire digital control interface and is intended to be driven by a microcontroller such as an Arduino board. Control signals require correct timing, so use a library or driver designed for WS2812B strips. You will need a separate 5V power supply sized for your installation, and a controller that outputs the one-wire data signal.
Typical Uses
- Animated accent lighting for rooms, furniture and display shelves
- Outdoor and garden lighting where the IP67 rating is needed
- Costume, prop and stage lighting with per-pixel effects
- Arduino and microcontroller learning projects
- Architectural and signage accents along curved surfaces
What's in the Box
1 x WS2812B 5V Addressable RGB Waterproof LED Strip, 5m.
Quick specs
- Item Type
- LED Strip
- Color
- White
- Strip Length (meter)
- 5
- Max. Power (W)
- 90
- Width (mm)
- 12
- Thickness (mm)
- 4.6

















