Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This Uno R3 CH340G board is a cost-effective Arduino-compatible microcontroller with 14 digital I/O, 6 analog inputs, and USB or DC jack power. It works just like a standard Uno R3 for programming and serial communication once the CH340 driver is installed.

Key Highlights

  • ATmega328P microcontroller in SMD package with CH340G USB interface
  • 14 digital I/O pins, 6 with PWM output, plus 6 analog inputs
  • 32 KB flash memory, 2 KB SRAM, 1 KB EEPROM
  • 16 MHz clock speed for responsive control
  • Power via DC jack (7-12 V) or USB
  • On-board LEDs for power, pin 13, TX, and RX

Ideal For

  • Students learning microcontroller programming
  • Hobbyists building Arduino-compatible projects
  • Makers needing an affordable Uno R3 alternative
  • Educators teaching electronics and coding
  • DIY enthusiasts prototyping sensor and control systems

Buying Tip

Remember to install the CH340 driver before connecting the board to your computer for the first time.

Elecvora expert review

Our verdict

This board delivers the core Uno R3 experience at a lower cost, making it a smart choice for budget-conscious projects. The CH340G chip handles programming and serial communication reliably, and the board behaves identically to a standard Uno during normal operation.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Affordable alternative to official boards
  • Standard Uno R3 pinout and form factor
  • Reliable ATmega328P microcontroller
  • Flexible power options (USB or DC jack)

Cons

  • Requires CH340 driver installation
  • No official warranty or support
  • Limited to 5 V operation

Best for

Budget-minded makers and students

Not ideal for

Projects requiring official Arduino warranty or advanced features

Specifications

Item TypeDevelopment Board
Board TypeUno
Chip TypeATmega328P
MicrocontrollerATmega328 (SMD) - Interface CH340G
Operating Voltage (VDC)5
Input Voltage (V)7-12V
Input Voltage (limit)6-20V
Analog I/O Pins6
Digital I/O Pins14 (of which 6 provide PWM output)
PWM Digital I/O Pins6
DC Current for 3.3V Pin(mA)50
DC Current per I/O Pin (mA)40
Clock Speed16 MHz
SRAM2
EEPROM1 KB (ATmega328)
Flash Memory32 KB
Power Supply OptionDC Jack or USB
On Board LEDOn/Off, L (PIN 13), TX, RX
Operating Temperature (°C)-40 to 90
Dimensions (L x W x H) mm75 x 54 x 12
Weight (g)26
Shipping Weight0.05 kg
Shipping Dimensions10 × 6 × 4 cm

What's in the box

  • 1 x Uno R3 CH340G ATmega328P Development Board
  • 1 x set of male jumper headers

Frequently Asked Questions

Do I need to install a driver to use this board?
Yes, you need to install the CH340 USB driver on your computer before the board can communicate with the Arduino IDE. The driver is available for Windows, macOS, and Linux.
Is this board compatible with Arduino shields?
Yes, it uses the standard Uno R3 pinout and form factor, so most shields designed for the Uno R3 will fit and work correctly.
What power supply should I use?
You can power the board via USB (5 V) or through the DC jack with 7-12 V. The input voltage limit is 6-20 V, but 7-12 V is recommended for stable operation.
What is included in the package?
The package includes one Uno R3 CH340G development board and a set of male jumper headers.
Can I use this board with the official Arduino IDE?
Yes, it is fully compatible with the Arduino IDE. Simply select Arduino Uno as the board type and choose the correct port.
What is the difference between this and an official Uno R3?
This board uses the CH340G chip for USB-to-serial conversion instead of the ATmega16U2 found on official boards. Functionally, they are identical for programming and serial communication, but this board is more affordable and does not come with official warranty or support.

Overview

The Uno R3 CH340G ATmega328P Development Board is an Arduino-compatible board designed for cost-conscious makers who still need the familiar Uno layout. It uses the ATmega328P microcontroller in an SMD package and a CH340G chip for USB-to-serial conversion, keeping the board affordable while retaining the same pinout and functionality as the standard Uno R3. Whether you are teaching electronics, building a prototype, or adding a reliable controller to a project, this board provides the essential features without unnecessary extras.

Key Features

  • ATmega328P microcontroller: 32 KB flash, 2 KB SRAM, and 1 KB EEPROM for your sketches and data.
  • 14 digital I/O pins: Six of these support PWM output for dimming LEDs or controlling motors.
  • 6 analog inputs: Read sensors such as potentiometers, light-dependent resistors, or temperature sensors.
  • CH340G USB interface: Enables programming and serial communication over USB after installing the driver.
  • Flexible power: Accepts 7-12 V via the DC jack or 5 V via USB; input limit is 6-20 V.
  • On-board LEDs: Power indicator, pin 13 LED, and TX/RX LEDs for quick status checks.

Specifications Explained

The 16 MHz clock speed is standard for Uno-class boards, providing enough processing power for most hobby projects. With 32 KB of flash, you can store moderately complex sketches, while 2 KB SRAM handles runtime variables and 1 KB EEPROM retains data across power cycles. Each I/O pin can source or sink up to 40 mA, enough for LEDs and small sensors, but not for high-power devices like motors or relays directly. The 3.3 V pin supplies up to 50 mA, suitable for low-power sensors. Operating temperature range of -40 to 90 °C means the board can work in harsh environments, though it is typically used indoors.

Compatibility and Requirements

This board is compatible with the Arduino IDE. To program it, you will need to install the CH340 USB driver on your computer, select the Uno board type, and choose the correct COM port. It works with Windows, macOS, and Linux systems that support the CH340 driver. No other special software is required. The board can be powered via USB or an external DC supply (7-12 V recommended).

Typical Uses

Use this board for learning electronics and programming, building sensor-based projects, controlling LEDs and small motors, creating simple robots, or as a reliable controller in DIY automation. Its standard Uno form factor means it fits many existing shields and accessories designed for the Uno R3.

What's in the Box

  • 1 x Uno R3 CH340G ATmega328P Development Board
  • 1 x set of male jumper headers

Quick specs

Item Type
Development Board
Board Type
Uno
Chip Type
ATmega328P
Microcontroller
ATmega328 (SMD) - Interface CH340G
Operating Voltage (VDC)
5
Input Voltage (V)
7-12V
See all specifications