Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A breadboard prototyping kit that bundles an 830-point board, jumper wires, a 3.3V/5V power module, resistors, LEDs, ICs and switches in one storage box. It lets you start building and testing circuits without hunting down individual parts first.

Key Highlights

  • 830-point solderless breadboard for reusable circuit layouts
  • 65 flexible and 140 U-shape jumper wires included
  • MB102 power module with 3.3V and 5V outputs
  • 100-piece resistor pack plus LEDs, buzzers and switches
  • 74HC595N shift register, 4N35 optocoupler and PN2222A transistors
  • Eight-grid storage box keeps components organised

Ideal For

  • Students learning breadboard circuit basics
  • Hobbyists prototyping small electronics projects
  • Teachers preparing classroom demonstrations
  • Makers testing sensor and logic ideas
  • Bench technicians keeping common parts on hand

Buying Tip

Check that you have a suitable power source for the MB102 module before your first build, since it is not included in the listed package contents.

Elecvora expert review

Our verdict

This is a sensible all-in-one pack for breadboard work, covering the wiring, power module and common parts that most small experiments need. It is not a precision instrument kit, but it removes the usual delay of ordering single components.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Breadboard, jumpers and power module bundled together
  • Broad mix of passive and active components
  • Reusable solderless prototyping format
  • Storage box keeps parts organised

Cons

  • Power source for the MB102 module is not included
  • Component quantities are modest for larger builds
  • No documentation or project guide is listed

Best for

Beginners and hobbyists building breadboard circuits

Not ideal for

Production runs or soldered permanent assemblies

Specifications

Item TypeKit
Model No. / NameElectronics Component Kit
CompatibilityVarious Electronics
Shipping Weight0.221 kg
Shipping Dimensions16 × 11.5 × 5.5 cm

What's in the box

  • 1 x 830-point solderless breadboard
  • 1 x 65-piece flexible breadboard jumper wire set
  • 1 x 140-piece U-shape breadboard jumper wire set
  • 1 x MB102 breadboard power supply module, 3.3V/5V
  • 1 x 40-pin straight breakable pin header, 2.54mm
  • 1 x 100-piece E4-3 resistor pack
  • 1 x eight-grid box, 19.5 x 12.7 x 4.5cm
  • 1 x 20-pin male-to-female Dupont line
  • 1 x AE071 parts kit
  • 50 x 5mm RGBWY LEDs with 28mm legs
  • 1 x 5mm RGB LED, 4-pin common cathode
  • 2 x 5mm 5528 LDR light-dependent resistors
  • 1 x 5V active buzzer
  • 1 x 5V passive buzzer
  • 10 x 6x6x5 tactile push button switches
  • 1 x 74HC595N
  • 5 x 1N4007 diodes
  • 1 x 4N35
  • 1 x 10K precision potentiometer
  • 1 x 10K thermistor
  • 5 x 10uF 50V electrolytic capacitors
  • 5 x 100uF 50V electrolytic capacitors
  • 5 x PN2222A transistors

Frequently Asked Questions

Do I need to solder anything to use this kit?
No. The 830-point breadboard is solderless, so components and jumper wires push into the board and can be removed again.
What voltages does the MB102 module provide?
The module provides 3.3V and 5V outputs for the breadboard rails. Check your circuit's requirements before connecting it.
Is a power supply included for the module?
The listed package contents do not include a power source for the MB102 module, so you will need to provide a suitable one separately.
Can I use this kit for learning electronics?
Yes. The mix of resistors, LEDs, switches, capacitors, buzzers and basic ICs supports many introductory breadboard experiments.
How should I store the components?
Keep the small parts in the supplied eight-grid box, separated by type, to avoid mixing resistor values and losing small items.
What is the 74HC595N used for?
It is a shift register that lets a microcontroller control more outputs using fewer pins, which is useful in breadboard logic experiments.

Overview

The Pro-Range Electronic Component Kit is designed for people who prototype circuits regularly and want the usual parts within reach. Rather than buying resistors, jumpers and a breadboard separately, this kit puts them together in a single eight-grid box. The core of the set is an 830-point solderless breadboard, which lets you place and move components without soldering, so a circuit can be built, tested and rebuilt in minutes.

Around that board, the kit supplies the wiring and power items that most builds need: 65 flexible breadboard jumper wires, 140 U-shape jumper wires, a 20-pin male-to-female Dupont line and an MB102 power supply module with 3.3V and 5V outputs. This makes the kit a practical starting point for learning, teaching and everyday bench work.

Key Features

  • Ready-to-use prototyping base: an 830-point solderless breadboard plus flexible and U-shape jumper wires.
  • On-board power options: the MB102 module provides 3.3V and 5V rails for the breadboard.
  • Wide component mix: resistors, capacitors, LEDs, buzzers, push buttons, a potentiometer, a thermistor and an LDR.
  • Active devices included: 74HC595N shift register, 4N35 optocoupler and PN2222A transistors.
  • Organised storage: an eight-grid box keeps small parts separated and easy to find.

Specifications Explained

The 830-point breadboard is the working surface: each point accepts component legs and jumper pins, and the board is reusable, so nothing is permanent. The two jumper wire sets serve different purposes. Flexible wires are useful for longer or awkward runs, while U-shape wires suit short, tidy links between adjacent rows.

The MB102 module is the power section. It accepts a supply and provides 3.3V and 5V outputs, which covers many common logic and LED experiments. The 100-piece E4-3 resistor package gives you a range of values for current limiting and pull-up or pull-down duties. The 5mm LED assortment, active and passive buzzers, tactile switches and electrolytic capacitors cover indication, sound and timing basics. The 74HC595N is a serial-in, parallel-out shift register, the 4N35 is an optocoupler, and the PN2222A parts are general-purpose NPN transistors.

Compatibility and Requirements

The kit is intended for various electronics work and is built around standard breadboard prototyping. The MB102 module provides 3.3V and 5V outputs; check that your project matches those rails before connecting it. A suitable power source for the module is not listed in the package contents, so plan for one separately. No soldering is required for breadboard use, though the pin headers and Dupont line are best handled with care to avoid bending pins.

Typical Uses

Use the kit to learn how resistors, LEDs, switches and capacitors behave in a circuit, to build small logic experiments with the 74HC595N, or to test a sensor idea with the LDR or thermistor. It also works well for classroom demonstrations, hobby bench projects and quick proof-of-concept builds before committing a design to a permanent board.

What's in the Box

  • 1 x 830-point solderless breadboard
  • 1 x 65-piece flexible breadboard jumper wire set
  • 1 x 140-piece U-shape breadboard jumper wire set
  • 1 x MB102 breadboard power supply module, 3.3V/5V
  • 1 x 40-pin straight breakable pin header, 2.54mm
  • 1 x 100-piece E4-3 resistor pack
  • 1 x eight-grid box, 19.5 x 12.7 x 4.5cm
  • 1 x 20-pin male-to-female Dupont line
  • 1 x AE071 parts kit
  • 50 x 5mm RGBWY LEDs with 28mm legs
  • 1 x 5mm RGB LED, 4-pin common cathode
  • 2 x 5mm 5528 LDR light-dependent resistors
  • 1 x 5V active buzzer and 1 x 5V passive buzzer
  • 10 x 6x6x5 tactile push button switches
  • 1 x 74HC595N, 5 x 1N4007 diodes, 1 x 4N35
  • 1 x 10K precision potentiometer, 1 x 10K thermistor
  • 5 x 10uF 50V and 5 x 100uF 50V electrolytic capacitors
  • 5 x PN2222A transistors

Quick specs

Item Type
Kit
Model No. / Name
Electronics Component Kit
Compatibility
Various Electronics
Shipping Weight
0.221 kg
Shipping Dimensions
16 × 11.5 × 5.5 cm
See all specifications