
1 / 3 · Click to enlarge
AI Summary
A compact starter kit built around the UNO R3 CH340 board, supplied with a breadboard, LEDs, resistors, buttons, LDRs and Dupont wires. Everything needed to begin simple Arduino circuits is organised in one 37-compartment box.
Key Highlights
- UNO R3 improved version board with CH340 chip included
- 400-point solderless breadboard for quick, reusable circuits
- Assorted 5 mm red, green and yellow LEDs with 28 mm legs
- 1K, 10K, 220R and 100K resistors plus two LDRs
- Tactile push buttons, pin headers and male-to-male Dupont wires
- 9V battery connector and USB 2.0 A-B cable in a 37-kit box
Ideal For
- Students beginning Arduino and embedded electronics
- Hobbyists who want a compact breadboard starter set
- Teachers preparing simple hands-on circuit exercises
- Makers testing LED, button and light-sensing ideas
- Beginners who prefer organised, reusable components
Buying Tip
Check that you have a computer with a USB port and the CH340 driver available before connecting the included UNO R3 board for the first time.
Elecvora expert review
Our verdict
A sensible first kit for anyone who wants to learn Arduino basics without buying every small part separately. The included UNO R3 CH340 board, breadboard and component selection cover the early learning curve well, though you will need your own computer and possibly a 9V battery.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Includes an UNO R3 board, breadboard and USB cable together
- Useful spread of LEDs, resistors, buttons and LDRs
- Organised 37-compartment storage box
- Solderless breadboard makes circuits easy to change
Cons
- 9V battery is not included
- No software or project book is supplied
- Component quantities are limited for larger projects
Best for
Beginners starting Arduino coding and simple electronics projects
Not ideal for
Advanced makers needing large component counts or pre-built project guides
Specifications
| Item Type | Kit |
|---|---|
| Compatibility | Arduino Uno |
| Shipping Weight | 0.151 kg |
| Shipping Dimensions | 16 × 9.5 × 3 cm |
What's in the box
- 1 x UNO R3 Improved Version CH340 Chip board
- 1 x 400 Points Solderless Breadboard
- 1 x 1.64FT USB 2.0 A-B Male Printer Cable 0.5m
- 1 x 5mm Red LED with 28mm legs
- 1 x 5mm Green LED with 28mm legs
- 1 x 5mm Yellow LED with 28mm legs
- 2 x 5mm 5528 LDR Light Dependent Resistor
- 6 x 12x12x7.3mm Tactile Push Button Switch Square
- 2 x 1x40pin Straight Pin Header 2.54mm Breakable
- 10 x Resistor 1K 1/4W 1%
- 10 x Resistor 10K 1/4W 1%
- 10 x Resistor 220R 1/4W 1%
- 10 x Resistor 100K 1/4W 1%
- 1 x 9V Battery Connector with DC
- 1 x 37 Kit airplane box 15x11x3cm
- 2 x Whitehat
- 2 x Red hat
- 2 x Blue hat
- 1 x 20Pin Male-to-male Dupont line
Frequently Asked Questions
What board is included in this kit?
Do I need to solder anything?
Is a battery included?
What can I build with the included parts?
How do I connect the board to my computer?
How should I store the kit?
Overview
The Pro-Range Basic Kit for Arduino UNO is designed for makers who want to start building embedded projects without assembling a parts list one item at a time. It pairs an UNO R3 improved version board using the CH340 chip with a 400-point solderless breadboard, so circuits can be assembled, tested and taken apart without soldering. A USB 2.0 A-B printer cable is included for connecting the board to a computer, and a 9V battery connector with DC plug gives you an alternative power option for standalone experiments.
The kit is organised in a 37-compartment box measuring 15 × 11 × 3 cm, which keeps small parts separated and easy to find between sessions.
Key Features
- Ready-to-wire component set: LEDs, resistors, LDRs, push buttons, headers and Dupont wires cover a wide range of beginner circuits.
- Solderless breadboard: the 400-point board lets you prototype and revise circuits quickly.
- Organised storage: the 37-kit airplane box keeps components sorted and portable.
- Practical resistor selection: 1K, 10K, 220R and 100K values support LED current limiting, pull-up and pull-down arrangements and simple sensing circuits.
- Light sensing included: two 5 mm 5528 LDRs make it easy to try light-dependent projects.
Specifications Explained
The kit is listed as a kit compatible with Arduino Uno, and the supplied board is an UNO R3 improved version with the CH340 chip. That board is the centre of the package, while the breadboard provides the workspace for building circuits around it. The 5 mm LEDs come with 28 mm legs in red, green and yellow, giving enough length to seat them in the breadboard. The tactile push button switches measure 12 × 12 × 7.3 mm, and the pin headers are 1 × 40 pin, 2.54 mm breakable strips. Resistors are supplied in 1/4W, 1% versions across four values. The kit weighs 0.151 kg and its shipping dimensions are 16 × 9.5 × 3 cm, making it easy to store or carry.
Compatibility and Requirements
The kit is intended for use with Arduino Uno compatible hardware and includes an UNO R3 improved version CH340 board. A computer with a USB port is required for programming through the included USB 2.0 A-B cable. The 9V battery connector is supplied, but a 9V battery is not listed among the contents and must be sourced separately if you want to power the board that way. No software, battery or additional tools are included beyond the listed package contents.
Typical Uses
Use the kit to practise blinking LEDs, reading button presses, building light-sensing circuits with the LDRs, and learning how resistors affect current in a circuit. It is also a practical way to become familiar with breadboard layout, jumper wiring and the basics of uploading sketches to an Arduino Uno compatible board.
What's in the Box
- 1 × UNO R3 improved version board with CH340 chip
- 1 × 400-point solderless breadboard
- 1 × 1.64 ft USB 2.0 A-B male printer cable, 0.5 m
- 1 × 5 mm red LED, 1 × 5 mm green LED, 1 × 5 mm yellow LED, each with 28 mm legs
- 2 × 5 mm 5528 LDR light dependent resistors
- 6 × 12 × 12 × 7.3 mm tactile push button switches
- 2 × 1 × 40 pin 2.54 mm breakable straight pin headers
- 10 × 1K, 10 × 10K, 10 × 220R and 10 × 100K resistors, 1/4W, 1%
- 1 × 9V battery connector with DC plug
- 1 × 37-kit airplane box, 15 × 11 × 3 cm
- 2 × white hats, 2 × red hats, 2 × blue hats
- 1 × 20-pin male-to-male Dupont line
Quick specs
- Item Type
- Kit
- Compatibility
- Arduino Uno
- Shipping Weight
- 0.151 kg
- Shipping Dimensions
- 16 × 9.5 × 3 cm




















