Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 7.4V 5600mAh 2S2P Li-ion battery pack with 13C continuous discharge, built with INR P28A cells for drone avionics and RC use. It offers high energy density and stable performance without cell puffing.

Key Highlights

  • 7.4V nominal voltage with 5600mAh capacity for extended run times
  • 13C continuous discharge supports moderate to high current draw
  • 2S2P configuration using impedance-matched INR P28A cells
  • Amass XT30 discharge and JST-RCY-BEC charge connectors pre-installed
  • Compact 70 x 40mm footprint and approximately 205g weight
  • No BMS for direct power management and simpler wiring

Ideal For

  • Drone avionics and FPV pilots needing a compact 2S Li-ion pack
  • RC fixed-wing and glider pilots seeking longer flight times
  • Ground station and portable electronics builders
  • DIY enthusiasts comfortable with custom battery integration
  • Cold-weather flyers needing reliable performance below -20°C

Buying Tip

Verify your charger supports Li-ion chemistry and the JST-RCY-BEC balance connector before charging this pack.

Elecvora expert review

Our verdict

The Pro-Range INR P28A offers a compelling blend of capacity, discharge capability, and compact size for drone avionics. Its Li-ion chemistry brings stability and cold-weather performance, though the lack of a BMS requires careful voltage management.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • High energy density for longer flight times
  • Stable chemistry resists puffing
  • Compact and lightweight design
  • Pre-installed XT30 and JST-RCY-BEC connectors
  • Good cold-weather performance

Cons

  • No built-in BMS for protection
  • Requires Li-ion compatible charger
  • XT30 connector may not suit all high-current setups

Best for

Drone avionics and RC pilots seeking a lightweight, high-capacity 2S Li-ion pack

Not ideal for

Beginners who need plug-and-play battery with built-in protection

Specifications

Nominal Voltage (V)7.4
Nominal Capacity (mAh)5600 mAh
Continuous Discharge Current (A)13C
BMS (Y/N)N
Charge ConnectorAmass XT30/3 Pin JST XH
Discharge PortAmass XT30, Amass XT60
Max. Discharging Voltage (V)5.8
Length (mm)70
Width (mm)40
Weight (g)~205
Model Series2
Shipping Weight0.28 kg
Shipping Dimensions13 × 11 × 6 cm

What's in the box

  • 1 x Pro-Range INR P28A 7.4V 5600mAh 13C 2S2P Quad Li-ion Drone Avionics Battery Pack with XT-30 & JST-RCY-BEC

Frequently Asked Questions

What is the maximum continuous discharge current of this battery?
The pack has a 13C continuous discharge rating, which translates to approximately 72.8A given its 5600mAh capacity.
Can I use this battery with a standard Li-Po charger?
No, you need a charger that supports Li-ion chemistry and has a JST-RCY-BEC balance port to charge this pack safely.
Does this battery have built-in over-discharge protection?
No, this pack does not include a BMS, so you must monitor voltage and avoid discharging below 5.8V.
What connectors are on this battery?
It features an Amass XT30 discharge connector and a JST-RCY-BEC charge connector.
What is included in the package?
The package includes one Pro-Range INR P28A 7.4V 5600mAh 13C 2S2P Li-ion battery pack with XT30 and JST-RCY-BEC connectors.
How should I store this battery when not in use?
Store it in a cool, dry place at around 50% charge, and avoid leaving it fully charged or fully discharged for extended periods.

Overview

The Pro-Range INR P28A is a 2S2P lithium-ion battery pack engineered for drone avionics and RC applications. It delivers a nominal 7.4V and 5600mAh capacity, with a 13C continuous discharge rating. The pack is assembled from impedance-matched INR P28A cells, which help maintain balanced performance across the series-parallel arrangement. Unlike Li-Po packs, this Li-ion chemistry is less prone to puffing or bulging, and it performs well even in colder conditions. The absence of a BMS means you have full control over the discharge and charge process, making it suitable for advanced users who integrate their own protection or monitoring. The pack comes with an Amass XT30 discharge connector and a JST-RCY-BEC charge connector, ready for installation.

Key Features

  • High energy density: Li-ion chemistry provides a higher watt-hour per kilogram than typical Li-Po packs, contributing to longer flight times.
  • Stable chemistry: INR cells resist puffing and swelling, maintaining their shape over repeated use.
  • Cold-weather performance: Operates effectively at temperatures below -20°C, according to the manufacturer.
  • Matched cells: Each pack uses cells with matched impedance for consistent output and longevity.
  • Compact and lightweight: At approximately 70 x 40mm and 205g, it fits space-constrained builds.
  • Ready connectors: Pre-fitted XT30 discharge and JST-RCY-BEC charge connectors simplify wiring.

Specifications Explained

Voltage and capacity: The 7.4V nominal voltage (8.4V fully charged) and 5600mAh capacity give a total energy of about 41.4Wh. This is ample for many drone avionics, cameras, and communication gear.

Discharge rate: The 13C continuous rating means the pack can deliver up to 72.8A continuously (13 times 5.6A). This supports power-hungry components while maintaining voltage stability.

Cell configuration: The 2S2P arrangement uses two cells in series and two in parallel, resulting in the 7.4V voltage and double the capacity of a single cell. This configuration balances voltage and runtime.

Connectors: The Amass XT30 discharge connector is rated for high current and secure mating. The JST-RCY-BEC charge connector allows for balance charging when used with a compatible charger.

Compatibility and Requirements

This pack is designed for systems that accept a 2S Li-ion voltage range (typically 5.8V to 8.4V). For drone applications, set your failsafe trigger to 6.4V (20% reserve) and avoid flying below 5.8V to prevent over-discharge. Ensure your ESC and power system can handle the XT30 connector and the 13C discharge rate. A compatible Li-ion charger with JST-RCY-BEC balance port is required for charging.

Typical Uses

This battery pack is well-suited for drone avionics, FPV setups, fixed-wing RC models, ground stations, and portable electronics that require a reliable 7.4V supply. Its compact size and high energy density make it a good choice for long-endurance missions where weight and space are critical.

What's in the Box

1 x Pro-Range INR P28A 7.4V 5600mAh 13C 2S2P Quad Li-ion Drone Avionics Battery Pack with XT-30 & JST-RCY-BEC.

Quick specs

Nominal Voltage (V)
7.4
Nominal Capacity (mAh)
5600 mAh
Continuous Discharge Current (A)
13C
BMS (Y/N)
N
Charge Connector
Amass XT30/3 Pin JST XH
Discharge Port
Amass XT30, Amass XT60
See all specifications