Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 22.2V 2800mAh 6S1P Li-ion pack with a 13C rating, XT60 main lead and 7-pin JST XH balance connector. It gives 5-inch and 7-inch FPV builds a compact, lightweight power option with steady voltage delivery.

Key Highlights

  • 22.2V nominal 6S1P Li-ion configuration for 5-inch and 7-inch FPV frames
  • 2800mAh capacity supports steady flight endurance on freestyle and long-range builds
  • 13C discharge rating matched to typical FPV current draw
  • Amass XT60 main connector plus JST-RCY-BEC female lead
  • 7-pin JST XH balance connector for charging and cell monitoring
  • Compact 70 x 56 x 39 mm body at roughly 320 g

Ideal For

  • FPV freestyle pilots flying 5-inch quads
  • Long-range pilots building 7-inch frames
  • Makers assembling compact UAV platforms
  • Pilots standardising on XT60 power connections
  • Builders who prefer Li-ion packs over heavier alternatives

Buying Tip

Check that your charger supports 6S Li-ion packs and has a 7-pin JST XH balance port before your first charge, since the pack ships with that balance lead only.

Elecvora expert review

Our verdict

A sensible choice for 5-inch and 7-inch FPV pilots who want a compact 6S Li-ion pack with standard XT60 wiring. The 2800mAh capacity and 13C rating suit steady freestyle and long-range flying rather than extreme burst demands.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Standard XT60 main connector simplifies installation
  • 7-pin JST XH balance lead supports proper cell monitoring
  • Compact, lightweight form factor for 5-inch and 7-inch frames
  • Includes a JST-RCY-BEC female lead for accessory power

Cons

  • Requires a Li-ion compatible 6S balance charger, sold separately
  • 13C rating is modest for high-burst racing use
  • Balance lead must be routed carefully to avoid prop contact

Best for

Freestyle and long-range FPV pilots flying 5-inch and 7-inch quads

Not ideal for

Racers needing very high burst current or pilots without a 6S Li-ion charger

Specifications

Shipping Weight0.24 kg
Shipping Dimensions11 × 9 × 7 cm

What's in the box

  • 1 x Pro-Range INR P28A 22.2V 2800mAh 13C 6S1P 5" and 7" FPV Drone Quad Li-ion Battery Pack with XT-60

Frequently Asked Questions

What voltage does this pack deliver?
It is a 6S Li-ion pack with a 22.2V nominal rating, built from six INR P28A cells in a 6S1P configuration.
Which drones is it designed for?
It is intended for 5-inch and 7-inch FPV quadcopters that accept a 6S Li-ion pack and an XT60 main connection.
What connectors does it have?
The pack uses an Amass XT60 main connector, a JST-RCY-BEC female lead and a 7-pin JST XH balance connector.
What charger do I need?
Use a Li-ion compatible balance charger that supports 6S packs and has a matching 7-pin JST XH balance port.
What is included in the package?
The package contains one Pro-Range INR P28A 22.2V 2800mAh 13C 6S1P Li-ion battery pack with XT-60.
How should I care for the pack?
Inspect the leads and cells regularly, charge with the balance lead connected, and store the pack safely away from flammable materials.

Overview

The Pro-Range INR P28A is a 6S1P Li-ion battery pack designed for 5-inch and 7-inch FPV quadcopters. It delivers 22.2V nominal from six INR P28A cells in series, with a 2800mAh capacity and a 13C discharge rating. The pack is built for pilots who want stable voltage delivery and a light, compact footprint rather than a bulky high-burst pack.

Wiring is straightforward: an Amass XT60 connector handles the main power link, a JST-RCY-BEC female lead is included for accessory power, and a 7-pin JST XH balance connector lets compatible chargers monitor and balance the six cells. The pack measures about 70 x 56 x 39 mm and weighs roughly 320 g.

Key Features

  • 6S1P Li-ion configuration with 22.2V nominal output
  • 2800mAh capacity for reliable flight endurance
  • 13C discharge rating suited to FPV current demands
  • Amass XT60 main connector for secure power transfer
  • JST-RCY-BEC female connector for accessory wiring
  • 7-pin JST XH balance connector for charging and monitoring
  • Compact, lightweight form factor for 5-inch and 7-inch frames

Specifications Explained

Voltage and configuration

Six cells in series give a 22.2V nominal pack, which is the standard 6S voltage class used by many FPV power systems. The 6S1P layout means one parallel string of six cells, keeping the pack simple and compact.

Capacity and discharge rate

At 2800mAh, the pack offers a moderate capacity for its size. The 13C rating describes the continuous discharge class the cells are intended for, which aligns with the load profile of 5-inch and 7-inch FPV quads rather than high-burst racing setups.

Connectors

The XT60 is a widely used main power connector, so the pack drops into builds already wired for XT60. The separate 7-pin JST XH balance lead is what a compatible balance charger connects to, and the JST-RCY-BEC female lead provides a convenient accessory tap.

Size and weight

At roughly 70 x 56 x 39 mm and about 320 g, the pack is intended for frames where weight and mounting space are planned around a Li-ion brick rather than a pouch cell pack.

Compatibility and Requirements

This pack is intended for 5-inch and 7-inch FPV frames and for power systems that accept a 6S Li-ion pack. Your build should use an XT60 main connection, and charging requires a Li-ion compatible balance charger with a matching 7-pin JST XH balance port. Confirm your frame's battery bay can accommodate the approximate 70 x 56 x 39 mm dimensions before mounting.

Typical Uses

Freestyle flying, long-range cruising and compact UAV builds are the natural fits, particularly where pilots want a lighter Li-ion pack and predictable voltage behaviour across a flight.

What's in the Box

  • 1 x Pro-Range INR P28A 22.2V 2800mAh 13C 6S1P 5" and 7" FPV Drone Quad Li-ion Battery Pack with XT-60