Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 3S2P 11.1V 5600mAh triangle Li-ion pack with 13C discharge, XT60 output and JST XH charge lead. It gives 4-inch and 5-inch FPV builds a lightweight, high-capacity option with stable cold-weather performance.

Key Highlights

  • 11.1V 3S2P configuration with 5600mAh nominal capacity
  • 13C continuous discharge rating for FPV flight demands
  • Triangle form factor sized for compatible 4-inch and 5-inch frames
  • Amass XT60 discharge port plus 4-pin JST XH charge connector
  • Impedance-matched P28A cells assembled in Taiwan
  • Roughly 315 g weight with compact 135 x 40 mm footprint

Ideal For

  • FPV pilots flying 4-inch quads with triangle battery bays
  • 5-inch cruising builds that prioritise flight time
  • Cold-weather FPV flyers needing stable output below -20°C
  • Pilots moving from Li-po to lithium-ion packs
  • Builders wanting a compact 3S pack with XT60 wiring

Buying Tip

Measure your frame's battery bay against the 135 x 40 mm triangle footprint and confirm your charger supports lithium-ion cells with a 4-pin JST XH balance lead before ordering.

Elecvora expert review

Our verdict

A well-considered 3S2P lithium-ion pack for 4-inch and 5-inch FPV builds that can take its triangle shape. The impedance-matched P28A cells and cold-weather behaviour make it a practical choice for longer, steadier flights rather than punchy acro sessions.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 5600mAh capacity with a 13C continuous rating
  • Impedance-matched P28A cells for even load sharing
  • Compact, relatively light triangle form at about 315 g
  • Stable performance below -20°C
  • No cell puffing or bulging under normal use

Cons

  • No built-in BMS, so you must manage voltage yourself
  • Triangle shape will not fit every frame
  • Requires a lithium-ion-compatible charger with 4-pin JST XH balance support

Best for

Longer-cruise FPV flying on 4-inch and 5-inch quads with triangle battery bays

Not ideal for

Pilots wanting plug-and-play protection or frames that only accept rectangular Li-po packs

Specifications

Nominal Voltage (V)11.1
Nominal Capacity (mAh)5600 mAh
Continuous Discharge Current (A)13C
BMS (Y/N)N
Charge Connector4 Pin JST XH
Discharge PortAmass XT60
Length (mm)135
Width (mm)40
Weight (g)~315
Model Series3
Shipping Weight0.38 kg
Shipping Dimensions16 × 10 × 6 cm

What's in the box

  • 1 x Pro-Range INR P28A 11.1V 5600mAh 13C 3S2P 4-inch and 5-inch FPV Drone Triangle Li-ion Battery Pack with XT-60

Frequently Asked Questions

What voltage should I set my failsafe to with this pack?
Set the battery failsafe trigger to 9.6V, which leaves about 20% reserve. The minimum voltage for flying is 8.7V, so plan to land before reaching it.
Does this battery have a built-in BMS?
No. The pack has no BMS, so voltage monitoring and protection are handled by your flight controller settings and your own flight discipline.
What connectors does it use?
Discharge is through an Amass XT60 port, and charging and balancing use a 4-pin JST XH connector. Your charger needs lithium-ion support and a matching balance connection.
Which drones is it made for?
It is built for 4-inch and 5-inch FPV drones that accept a 3S triangle lithium-ion pack. Check the 135 x 40 mm footprint against your frame first.
How much does the pack weigh?
Around 315 g, with shipping weight listed at 0.38 kg. Confirm this against your build's weight budget and centre of gravity.
How should I care for the pack?
Balance charge it on a lithium-ion profile, avoid discharging below 8.7V, and store it away from heat. The cells are designed not to puff or bulge under normal use.

Overview

The Pro-Range INR P28A is a 3S2P lithium-ion battery pack built for 4-inch and 5-inch FPV drones that use a triangle-shaped battery bay. It pairs an 11.1V nominal voltage with 5600mAh of capacity and a 13C continuous discharge rating, giving pilots a pack that favours flight time and stable output over the short, high-peak behaviour of many Li-po packs.

Each pack is assembled from impedance-matched P28A cells made in Taiwan, so the cells inside work together evenly rather than one carrying more load than the others. The result is a compact, comparatively light pack at around 315 g that fits frames designed around this triangle footprint.

Key Features

  • 3S2P layout with 11.1V nominal voltage and 5600mAh capacity
  • 13C continuous discharge rating
  • Triangle pack shape for frames built to accept it
  • Amass XT60 discharge port for standard high-current wiring
  • 4-pin JST XH charge connector for balance charging
  • Impedance-matched P28A cells assembled in Taiwan
  • No cell puffing or bulging under normal use
  • Holds performance at temperatures below -20°C

Specifications Explained

Voltage and cell count

At 11.1V nominal, this is a 3-cell series pack, so it behaves like a standard 3S battery on your power system. Plan your failsafe around the pack rather than a Li-po: set the battery failsafe trigger at 9.6V, which leaves roughly 20% reserve, and treat 8.7V as the minimum voltage for flying.

Capacity and discharge

The 5600mAh rating is the usable capacity figure for flight planning, and the 13C continuous rating describes how much current the pack is built to supply steadily. Compared with Li-po packs of similar capacity, lithium-ion cells generally offer a higher energy-to-weight ratio, which is where the longer flight time comes from.

Connectors and charging

Discharge runs through an Amass XT60, a common connector for FPV power leads. Charging and balancing use the 4-pin JST XH lead, so you need a charger that supports lithium-ion chemistry and a matching 4-pin balance board or adapter.

Size and weight

The pack measures 135 mm long and 40 mm wide and weighs about 315 g. Check your frame's battery area against these figures before ordering, since the triangle shape is not a drop-in fit for every quad.

Compatibility and Requirements

This pack is intended for 4-inch and 5-inch FPV drone builds that accept a 3S triangle lithium-ion pack and an XT60 connection. There is no BMS on board, so voltage monitoring and failsafe configuration are the pilot's responsibility. A lithium-ion-compatible charger with a 4-pin JST XH balance connection is required.

Typical Uses

Longer-cruise FPV flights, cinematic cruising on 4-inch and 5-inch quads, and cold-weather flying where the pack's sub -20°C performance helps. It also suits pilots who prefer the flat discharge behaviour and lack of puffing that lithium-ion cells bring.

What's in the Box

One Pro-Range INR P28A 11.1V 5600mAh 13C 3S2P triangle Li-ion battery pack with XT-60.

Quick specs

Nominal Voltage (V)
11.1
Nominal Capacity (mAh)
5600 mAh
Continuous Discharge Current (A)
13C
BMS (Y/N)
N
Charge Connector
4 Pin JST XH
Discharge Port
Amass XT60
See all specifications