Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A matched pair of 9.4-inch, 4.3-pitch two-blade propellers in carbon nylon, supplied as one CW and one CCW unit. The stepped 7 mm flat-side and 8 mm round-side bore makes them easy to fit on compatible multirotor hubs.

Key Highlights

  • 9.4-inch diameter with 4.3-inch pitch for multirotor thrust
  • Carbon nylon construction balances rigidity with impact flexibility
  • Matched pair: one clockwise and one counter-clockwise propeller
  • Stepped bore: 7 mm flat side and 8 mm round side
  • Two-blade design, 230 mm length and roughly 22 g each
  • Black finish for a clean, low-profile look on the airframe

Ideal For

  • DIY multirotor builders assembling a 9-inch class airframe
  • Pilots replacing a worn or damaged CW or CCW propeller
  • Hobbyists keeping a spare matched pair for test flights
  • Makers building and tuning custom drone platforms

Buying Tip

Measure your motor shaft and hub before ordering, because the bore is 7 mm on the flat side and 8 mm on the round side, and the two are not interchangeable.

Elecvora expert review

Our verdict

A sensible, no-fuss propeller pair for 9-inch class multirotors, with a matched CW and CCW set in every pack. The carbon nylon build and stepped bore make it a practical spare to keep in the flight box.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Matched CW and CCW pair in one pack
  • Carbon nylon offers stiffness with some impact give
  • Light at roughly 22 g per propeller
  • Stepped 7 mm and 8 mm bore suits common hub styles

Cons

  • No adapters or fasteners included
  • Bore sizes must match your hub exactly
  • CW and CCW blades cannot be swapped between positions

Best for

DIY multirotor builders and pilots needing a matched 9.4 x 4.3 propeller pair

Not ideal for

Pilots whose motor hubs do not match the 7 mm flat-side or 8 mm round-side bore

Specifications

Prop. Diameter (inch)9.4
MaterialCarbon Nylon
ColorBlack
Rotation DirectionCCW, CW
Rotation1CW+1CCW
No. of Blades2
Pitch(inch)4.3
Shaft Diameter7-(Flat Side) and 8-(Round Side)
Length (mm)230
Weight (g)22
Shipping Weight0.025 kg
Shipping Dimensions25 × 4 × 1 cm

What's in the box

  • 1 x Counter-Clockwise (CCW) 9443 propeller
  • 1 x Clockwise (CW) 9443 propeller

Frequently Asked Questions

What exactly is included in one pack?
One pack contains a single clockwise propeller and a single counter-clockwise propeller, both in the 9443 size.
Will these fit my motor?
Fitment depends on the hub. The bore is 7 mm on the flat side and 8 mm on the round side, so measure your motor shaft and mounting pattern first.
Can I use two clockwise propellers together?
No. A multirotor needs opposing rotation, so the CW and CCW blades must be fitted to the correct arms and motor directions.
What material are the blades made from?
They are moulded in carbon nylon and finished in black, which gives a light blade with useful rigidity.
How much does each propeller weigh?
Each propeller weighs approximately 22 g and measures 230 mm in length.
How should I care for them?
Inspect the blades after any impact or hard landing, check they sit flat on the hub, and replace any propeller showing cracks or deformation.

Overview

The Pro-Range 9443 is a two-blade propeller set for multirotors, sized at 9.4 inches in diameter with a 4.3-inch pitch. Each pack contains one clockwise and one counter-clockwise propeller, giving you the opposing rotation pair that a multirotor layout requires. The blades are moulded in carbon nylon and supplied in black.

At 230 mm long and around 22 g per propeller, these are intended for builds that can carry a larger disc area without a heavy penalty. The carbon nylon material is chosen to keep the blades stiff enough to hold their shape in flight while still flexing on impact.

Key Features

  • Matched rotation pair: one CW and one CCW propeller in every pack, ready for a standard opposing-rotation setup.
  • Carbon nylon blades: a blend that combines lightness with useful rigidity and impact tolerance.
  • Stepped shaft bore: 7 mm on the flat side and 8 mm on the round side for location on compatible hubs.
  • Two-blade profile: a simple, efficient format at 9.4 x 4.3 inches.
  • Black finish: understated and easy to match with most airframes.

Specifications Explained

Diameter and pitch: the 9.4-inch diameter sets the disc area the propeller sweeps, while the 4.3-inch pitch describes how far the blade would advance in one revolution in theory. Together they define the thrust and response character of the setup.

Shaft bore: the mounting hole is not a single round size. One side is 7 mm with a flat, and the other is 8 mm round. Check your motor or hub geometry against both figures before fitting.

Weight and length: each propeller is about 22 g and 230 mm long, figures worth noting when you are balancing an airframe or comparing replacements.

Rotation direction: CW and CCW blades are not interchangeable. Fit each one to the arm and motor direction it was made for.

Compatibility and Requirements

These propellers are intended for multirotor use. Fitment depends on the hub: the bore is 7 mm on the flat side and 8 mm on the round side, so confirm your motor shaft and mounting pattern match before purchase. No motor, frame, adapter or fasteners are included beyond the two propellers.

Typical Uses

Suitable for DIY multirotor builds, propeller replacement and general drone assembly work where a 9.4 x 4.3 two-blade set is called for. Keep a spare pair on hand for testing and repairs.

What's in the Box

  • 1 x counter-clockwise (CCW) 9443 propeller
  • 1 x clockwise (CW) 9443 propeller

Quick specs

Prop. Diameter (inch)
9.4
Material
Carbon Nylon
Color
Black
Rotation Direction
CCW, CW
Rotation
1CW+1CCW
No. of Blades
2
See all specifications

More from Pro-Range

View all →

Related Products

View all →