Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A four-piece set of 6-inch two-blade propellers in black polycarbonate, supplied as two CW and two CCW units. Their lightweight Flash profile and 4.2-inch pitch give quick throttle response on 5 mm shaft motors.

Key Highlights

  • 6-inch diameter with a 4.2-inch pitch for responsive multirotor thrust
  • Two-blade Flash profile keeps rotating mass low for fast spin-up
  • Polycarbonate construction balances stiffness with bending resistance
  • 5 mm shaft bore fits matching motor shafts directly
  • Supplied as two CW and two CCW propellers in black
  • Around 23 g for all four propellers, keeping the pair light

Ideal For

  • FPV pilots building or refreshing 6-inch multirotors
  • DIY quadcopter makers using 5 mm shaft motors
  • Pilots who prefer light two-blade propellers
  • Hobbyists tuning throttle response on mid-size builds

Buying Tip

Measure your motor shaft diameter and thread direction before ordering, since these propellers use a 5 mm bore and are supplied in a fixed two-CW, two-CCW set.

Elecvora expert review

Our verdict

A sensible, lightweight 6-inch propeller set for pilots who value quick response and simple replacement. The polycarbonate blades and matched CW/CCW pairing make it an easy choice for routine builds.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Light four-piece set at around 23 g total
  • Two-blade design spins up quickly
  • Polycarbonate offers stiffness with some flex
  • Matched CW and CCW propellers in one pack

Cons

  • Only a 5 mm shaft bore is offered
  • No mounting hardware is listed in the pack
  • Polycarbonate blades can still chip in hard impacts

Best for

6-inch multirotor builds using 5 mm shaft motors

Not ideal for

Motors with shaft sizes other than 5 mm

Specifications

Prop. Diameter (inch)6
MaterialPolycarbonate
ColorBlack
Rotation DirectionCCW, CW
Rotation2CW+ 2CCW
No. of Blades2
Shaft Diameter5 mm
Pitch(inch)4.2
Length (mm)152.4
Propeller TypeHD (Hyper Drive)
Weight (g)23 (for 4 Props)
Shipping Weight0.03 kg
Shipping Dimensions17 × 5 × 1 cm

What's in the box

  • 2 x Pro-Range 6042 Flash propeller, CW, black
  • 2 x Pro-Range 6042 Flash propeller, CCW, black

Frequently Asked Questions

How many propellers are included?
The pack contains four propellers: two clockwise and two counter-clockwise, all in black.
What motor shaft size do these fit?
They have a 5 mm shaft bore, so they are intended for motors with a matching 5 mm shaft.
Can I use them on a 5-inch quadcopter?
These are 6-inch propellers with a 152.4 mm diameter, so check frame clearance before fitting them to any build.
What is the pitch and why does it matter?
The pitch is 4.2 inches, which describes the theoretical advance per revolution and influences how quickly the propeller accelerates.
Do they come with nuts or adapters?
The listed package contains only the four propellers, so check whether you need separate mounting hardware.
How should I store and care for them?
Keep them away from heat and direct sun, inspect blades for cracks before each flight, and replace any damaged propeller.

Overview

The Pro-Range 6042 Flash is a set of four two-blade propellers for multirotors, moulded in black polycarbonate. Each set contains two clockwise and two counter-clockwise propellers, giving you a matched pair for a quadcopter layout. The 6-inch diameter and 4.2-inch pitch put them in the mid-size range, where pilots want a balance of thrust and quick throttle response rather than maximum top-end speed.

The Flash blade shape is deliberately slim, and the polycarbonate material is stiff enough to hold its form under load while still flexing on impact. That combination helps the propeller spin up quickly and keeps the motor from feeling heavy on the sticks.

Key Features

  • Two-blade Flash profile: a narrow blade shape that keeps inertia low for fast response.
  • Polycarbonate build: provides rigidity with some bending resistance for everyday flying.
  • Matched rotation set: two CW and two CCW propellers in one pack.
  • 5 mm shaft bore: mounts directly on motors with a matching shaft diameter.
  • Light overall weight: approximately 23 g for the four propellers together.

Specifications Explained

Diameter and pitch

At 6 inches (152.4 mm) across, these propellers sit between small park fliers and larger cinematic builds. The 4.2-inch pitch describes how far the blade would advance in one revolution in theory, and a moderate pitch like this favours controlled acceleration over raw speed.

Material and blades

Polycarbonate gives the blades enough stiffness to resist flexing at speed while remaining tolerant of minor knocks. Two blades per propeller reduce drag and weight compared with three- or four-blade designs, which is why the Flash series responds quickly to throttle changes.

Shaft and rotation

The 5 mm bore is the mounting dimension to check against your motor shafts. Because the pack includes both CW and CCW propellers, you can fit a standard quadcopter motor rotation pattern without buying two separate sets.

Compatibility and Requirements

These propellers require motors with a 5 mm shaft diameter and a mounting pattern that suits the propeller hub. Confirm your motor shaft size and thread direction before fitting, and use the CW propeller on the motors that turn clockwise and the CCW propeller on those that turn counter-clockwise. No other components are included.

Typical Uses

They suit 6-inch FPV multirotors, general-purpose quadcopter builds and DIY projects where a light two-blade propeller is preferred. Pilots refreshing a worn set or tuning a new build can use them as a straightforward replacement.

What's in the Box

  • 2 x Pro-Range 6042 Flash propeller, CW, black
  • 2 x Pro-Range 6042 Flash propeller, CCW, black

Quick specs

Prop. Diameter (inch)
6
Material
Polycarbonate
Color
Black
Rotation Direction
CCW, CW
Rotation
2CW+ 2CCW
No. of Blades
2
See all specifications