Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A matched 10x4.5 carbon nylon propeller pair in black, with one CW and one CCW prop for counter-rotating multicopter motors. Six included reducers adapt the 9.5 mm hub to shaft sizes from 3 mm to 8 mm.

Key Highlights

  • 10-inch diameter with a 4.5-inch pitch for multirotor thrust
  • Carbon nylon construction balances low weight and rigidity
  • One CW and one CCW propeller supplied as a matched pair
  • Six plastic reducers from 3 mm to 8 mm for shaft adaptation
  • Each propeller weighs approximately 32 g
  • Two-blade black design with a 9.5 mm shaft bore

Ideal For

  • DIY multicopter builders working with 10-inch propeller frames
  • Hobby pilots replacing a damaged CW or CCW propeller
  • Makers assembling lift-oriented multirotor airframes
  • Pilots who want a spare matched propeller pair for field repairs

Buying Tip

Confirm your motor shaft diameter matches one of the six supplied reducers (3, 3.17, 4, 5, 6 or 8 mm) and that your frame clears a 254 mm propeller diameter before ordering.

Elecvora expert review

Our verdict

A sensible, no-fuss propeller pair for 10-inch multicopter builds, with the included reducer set removing much of the guesswork around shaft fit. The carbon nylon construction and moderate 4.5-inch pitch suit general multirotor flying rather than aggressive high-speed work.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Matched CW and CCW pair in one pack
  • Six reducers cover a wide range of motor shaft sizes
  • Light at about 32 g per propeller
  • Carbon nylon adds stiffness without much weight

Cons

  • Mounting hardware is not included
  • Only one pair per pack, so a full quad needs multiple packs
  • Moderate pitch limits use on high-performance setups

Best for

DIY builders and hobby pilots flying 10-inch multirotor airframes

Not ideal for

Pilots needing high-pitch propellers for aggressive performance flying

Specifications

Prop. Diameter (inch)10
MaterialCarbon Nylon
ColorBlack
Rotation DirectionCCW, CW
Rotation1CW+1CCW
No. of Blades2
Pitch(inch)4.5
Shaft Diameter9.5 mm
Length (mm)254
Plastic Reducers3, 3.17, 4, 5, 6, 8
Weight (g)32
Shipping Weight0.033 kg
Shipping Dimensions27 × 4 × 1 cm

What's in the box

  • 1 x Counter-Clockwise (CCW) Propeller 1045 (10x4.5)
  • 1 x Clockwise (CW) Propeller 1045 (10x4.5)
  • 1 x Set of propeller reducers

Frequently Asked Questions

How many propellers come in one pack?
Each pack contains one clockwise and one counter-clockwise propeller, plus a set of plastic reducers. That is two propellers in total.
Will these fit my motor shaft?
The hub has a 9.5 mm bore and the pack includes reducers at 3, 3.17, 4, 5, 6 and 8 mm. Check your motor shaft diameter against those sizes before fitting.
What does 10x4.5 mean?
It refers to a 10-inch propeller diameter and a 4.5-inch pitch. The diameter is 254 mm, and the pitch describes the theoretical forward travel per revolution.
Do I need any other parts to install them?
Yes. Motors, ESCs and the prop nut or mounting hardware are not included, so you will need your own hardware to secure the propellers.
Which propeller goes on which motor?
Fit the CW propeller to the motor that rotates clockwise and the CCW propeller to the motor that rotates counter-clockwise, following your flight controller's motor layout.
How should I store and care for them?
Keep the propellers out of direct heat and inspect them for cracks or chips after any impact. Replace a damaged propeller rather than flying with it.

Overview

The Pro-Range 1045 is a two-blade propeller pair made for multicopters and DIY drone builds. Each pair includes one clockwise and one counter-clockwise propeller, which is the arrangement most multirotor airframes need to balance motor torque. The blades are moulded in carbon nylon and finished in black, giving the propeller a light but stiff structure at roughly 32 g per unit.

Key Features

  • Matched rotation pair: one CW and one CCW propeller in every pack.
  • Carbon nylon build: a material choice that supports rigidity while keeping weight down.
  • 10x4.5 geometry: a 10-inch diameter combined with a 4.5-inch pitch.
  • Reducer set included: plastic reducers in 3, 3.17, 4, 5, 6 and 8 mm sizes.
  • Two-blade layout: a simple, lightweight profile for multirotor use.

Specifications Explained

The 10-inch diameter (254 mm) defines the overall disc size, which is the main factor in how much thrust the propeller can produce and how much clearance the frame needs. The 4.5-inch pitch describes how far the propeller would advance in one revolution in ideal conditions; a moderate pitch like this is generally easier on motors and ESCs than a high-pitch design.

The 9.5 mm shaft bore is the centre opening in the hub. Because motor shafts vary, the pack includes six plastic reducers at 3, 3.17, 4, 5, 6 and 8 mm, letting you sleeve the hub down to match your motor shaft. The two-blade configuration keeps each propeller at about 32 g, which reduces rotating mass at the end of each arm.

Compatibility and Requirements

These propellers are intended for multicopters that run counter-rotating motors, since the pack supplies one CW and one CCW unit. Check that your motor shaft matches one of the supplied reducer sizes and that your frame provides enough clearance for a 254 mm propeller diameter. You will need your own motors, ESCs and mounting hardware to install them.

Typical Uses

Typical applications include DIY multirotor assembly, replacing worn or damaged propellers on an existing 10-inch build, and general sport or lift-oriented flying where a moderate pitch is preferred. The pair format also makes it easy to keep a spare set on hand for field repairs.

What's in the Box

  • 1 x counter-clockwise 1045 (10x4.5) propeller
  • 1 x clockwise 1045 (10x4.5) propeller
  • 1 set of propeller reducers

Quick specs

Prop. Diameter (inch)
10
Material
Carbon Nylon
Color
Black
Rotation Direction
CCW, CW
Rotation
1CW+1CCW
No. of Blades
2
See all specifications

More from Pro-Range

View all →

Related Products

View all →