Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

Pro-Range 1045 carbon nylon propellers for DJI multirotors, sold as a pair with one CW and one CCW. Lightweight at 26g each, they fit 7mm flat or 8mm round shafts and deliver stable 10x4.5 performance.

Key Highlights

  • 10-inch diameter with 4.5-inch pitch for multirotor lift
  • Carbon nylon material balances low weight and strength
  • Includes one CW and one CCW propeller per pair
  • Fits 7mm flat-side and 8mm round-side shafts
  • Each propeller weighs approximately 26g
  • Two-blade design for efficient airflow

Ideal For

  • DIY drone builders assembling a 10-inch multirotor
  • Pilots replacing worn or damaged propellers on DJI-style mounts
  • Hobbyists maintaining a trainer or aerial photography quad
  • Makers who need a matched CW and CCW propeller pair
  • Users with 7mm flat or 8mm round shaft motors

Buying Tip

Verify your motor shaft is 7mm with a flat side or 8mm round before ordering, and remember that one pair equips only one motor position per rotation direction.

Elecvora expert review

Our verdict

The Pro-Range 1045 offers a practical combination of a common 10x4.5 size, lightweight carbon nylon construction, and a matched CW/CCW pair. It is a sensible choice for pilots who need a straightforward replacement set for multirotors with compatible shafts.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Lightweight at 26g per propeller
  • Carbon nylon material for strength and rigidity
  • Includes both CW and CCW propellers
  • Fits common 7mm flat and 8mm round shafts

Cons

  • Only one pair included, so a quadcopter needs multiple sets
  • No mounting hardware or adapters included
  • Shaft compatibility is limited to specified sizes

Best for

DIY multirotor builders and pilots needing a matched 10-inch propeller pair

Not ideal for

Motors with shaft sizes other than 7mm flat or 8mm round

Specifications

Prop. Diameter (inch)10
MaterialCarbon Nylon
ColorBlack
Rotation DirectionCCW, CW
Rotation1CW+1CCW
No. of Blades2
Pitch(inch)4.5
Shaft Diameter7-(Flat Side) and 8-(Round Side)
Length (mm)254
Weight (g)26
Shipping Weight0.03 kg
Shipping Dimensions27 × 4 × 1 cm

What's in the box

  • 1 x Counter-Clockwise (CCW) Propeller 1045 (10x4.5)
  • 1 x Clockwise (CW) Propeller 1045 (10x4.5)

Frequently Asked Questions

What is included in the package?
The package includes one clockwise (CW) propeller and one counter-clockwise (CCW) propeller. No other accessories are included.
Will these propellers fit my motor?
They are designed for motor shafts with a 7mm flat side or an 8mm round side. Check your motor's shaft dimensions before ordering.
How many propellers do I need for a quadcopter?
A standard quadcopter requires two CW and two CCW propellers, so you would need two pairs of this product.
Are these propellers suitable for outdoor flight?
Yes, they are intended for multirotor use. However, always inspect them for damage before flying and replace any propeller that is cracked or deformed.
What does the 10x4.5 size mean?
The first number is the diameter in inches (10 inches) and the second is the pitch in inches (4.5 inches). This indicates the propeller's size and theoretical advance per revolution.
How should I care for these propellers?
Keep them clean and store them away from excessive heat or direct sunlight. Check for nicks or bending after any hard landing and replace as needed.

Overview

The Pro-Range 1045 is a 10-inch, two-blade propeller set designed for multirotors and drones. Each pair contains one clockwise (CW) and one counter-clockwise (CCW) propeller, giving you a matched set for a quadcopter or similar build. Made from carbon nylon, these props are intended to offer a useful balance between lightness and rigidity, which matters when you want responsive control without adding unnecessary mass to the motor arms.

Key Features

  • 10x4.5 size: A 10-inch diameter and 4.5-inch pitch, a common combination for multirotor propulsion.
  • Carbon nylon construction: Chosen for its strength-to-weight characteristics and resistance to everyday knocks.
  • Dual rotation set: One CW and one CCW propeller in every pair, so you can equip a multirotor without buying separate items.
  • Lightweight: Approximately 26g per propeller helps keep rotating mass low.
  • Shaft compatibility: The mounting hole is sized for 7mm flat-side and 8mm round-side shafts.
  • Aerofoil tip design: The propeller tips incorporate a 15-degree angle intended to reduce vortex formation and support airflow efficiency.

Specifications Explained

Diameter and pitch: The 10-inch diameter defines the swept area, while the 4.5-inch pitch describes how far the propeller would advance in one revolution in a perfect medium. Together they influence thrust, current draw, and flight feel. A larger diameter generally moves more air at lower RPM, and the 4.5 pitch is a moderate value that suits many multirotor setups.

Material: Carbon nylon is a composite that aims to provide stiffness without the brittleness of plain plastic. It can help the propeller hold its shape under load, which contributes to stable flight characteristics.

Shaft diameter: The hub is designed to fit shafts with a 7mm flat side and an 8mm round side. Check your motor's shaft type before ordering to ensure a proper match.

Weight: At about 26g each, these propellers are light enough to reduce rotational inertia, which can help with throttle response and motor efficiency.

Compatibility and Requirements

These propellers are intended for multirotor motors with a 7mm flat-side or 8mm round-side shaft. The set includes one CW and one CCW propeller, so you will need additional pairs for a complete quadcopter unless your build uses a different configuration. Always confirm the shaft dimensions and rotation direction before installation. No mounting hardware is included unless stated in the package contents.

Typical Uses

These props are suitable for DIY drone builds, multirotor maintenance, and general replacement needs. They can be used on trainer quads, aerial photography platforms, and custom frames that accept 10-inch propellers. The carbon nylon material makes them a practical choice for pilots who want a durable set for regular flying.

What's in the Box

Each package contains one counter-clockwise (CCW) propeller and one clockwise (CW) propeller. Please note that the propellers are the only items included; motors, frames, and mounting accessories are not part of the set.

Quick specs

Prop. Diameter (inch)
10
Material
Carbon Nylon
Color
Black
Rotation Direction
CCW, CW
Rotation
1CW+1CCW
No. of Blades
2
See all specifications

More from Pro-Range

View all →

Related Products

View all →