Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A matched 1CW + 1CCW pair of 8x4.5 ABS propellers with a 9.5 mm shaft bore and six plastic reducers. Lightweight at about 18 g each and ready for multi-copter builds or replacements.

Key Highlights

  • 8-inch diameter with 4.5-inch pitch for multi-copter thrust
  • Black ABS construction balances low weight and rigidity
  • Matched 1CW + 1CCW pair for one motor position
  • 9.5 mm shaft bore with six reducers from 3 to 8 mm
  • Two-blade design with 15-degree tip to reduce vortex
  • Each propeller weighs approximately 18 g

Ideal For

  • DIY multi-copter builders using 8-inch propellers
  • Pilots replacing a damaged CW or CCW blade
  • Makers maintaining a spare matched pair
  • Hobbyists adapting propellers to different motor shafts

Buying Tip

Confirm your motor shaft diameter matches one of the supplied reducers (3, 3.17, 4, 5, 6 or 8 mm) and that your frame has clearance for an 8-inch propeller before ordering.

Elecvora expert review

Our verdict

A practical, low-cost matched pair for 8-inch multi-copter setups, with the included reducer set adding useful flexibility across different motor shafts. The ABS build keeps weight down, though the fixed 4.5-inch pitch means it is a general-purpose choice rather than a specialist blade.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Matched CW/CCW pair in one pack
  • Six reducers cover common shaft sizes
  • Light at about 18 g per propeller
  • Rigid ABS construction

Cons

  • Only one pair per pack, so a full quad needs multiple packs
  • No motor or mounting hardware included
  • ABS can be less forgiving than other materials in a hard impact

Best for

DIY multi-copter builders needing a matched 8-inch CW/CCW pair with reducer flexibility

Not ideal for

Pilots needing a complete propeller set for a full quad in a single purchase

Specifications

Prop. Diameter (inch)8
MaterialABS
ColorBlack
Rotation DirectionCCW, CW
Rotation1CW+1CCW
No. of Blades2
Pitch(inch)4.5
Shaft Diameter9.5 mm
Length (mm)204
Plastic Reducers3, 3.17, 4, 5, 6, 8
Weight (g)18
Shipping Weight0.02 kg
Shipping Dimensions24 × 4 × 1 cm

What's in the box

  • 1 x Counter-Clockwise (CCW) 8045 propeller
  • 1 x Clockwise (CW) 8045 propeller
  • 1 set of plastic reducers (3, 3.17, 4, 5, 6 and 8 mm)

Frequently Asked Questions

How many propellers are in one pack?
Each pack contains one clockwise and one counter-clockwise propeller, plus a set of plastic reducers.
What motor shaft sizes do the reducers fit?
The included reducers cover 3, 3.17, 4, 5, 6 and 8 mm shafts, adapting the 9.5 mm bore.
Are these propellers for multi-copters only?
They are designed for multi-copter use. No other applications are specified for this model.
What is the pitch and diameter?
The propeller is 8 inches in diameter with a 4.5-inch pitch, and it has two blades.
How much does each propeller weigh?
Each propeller weighs approximately 18 g, with a shipping weight of 0.02 kg for the pack.
How should I care for these propellers?
Inspect the blades for cracks or deformation before each flight and store them flat to avoid warping. Replace any propeller that shows damage.

Overview

The Pro-Range 8045 is a two-blade propeller set for multi-copters, supplied as one clockwise and one counter-clockwise propeller. Each blade measures 8 inches in diameter with a 4.5-inch pitch and is moulded in black ABS. At roughly 18 g per propeller and 204 mm in length, the pair is intended for builds where a moderate 8-inch disc area is required without adding unnecessary mass at the motor.

The set includes six plastic reducers in 3, 3.17, 4, 5, 6 and 8 mm sizes, allowing the 9.5 mm bore to be adapted to different motor shaft diameters. This makes the pair useful for DIY makers who may swap motors or maintain several airframes.

Key Features

  • Matched rotation pair: one CW and one CCW propeller in every pack.
  • ABS material: a rigid thermoplastic that keeps the blades light and shape-retentive.
  • 15-degree tip design: shaped to reduce whirlpool formation at the blade tips.
  • Reducer set included: six inserts cover 3, 3.17, 4, 5, 6 and 8 mm shafts.
  • Compact shipping size: 24 x 4 x 1 cm and 0.02 kg, easy to store as spares.

Specifications Explained

Diameter and pitch: the 8-inch diameter and 4.5-inch pitch define how much air the propeller moves per revolution. A lower pitch generally favours control and efficiency over outright top speed, which suits stable multi-copter flight.

Shaft bore and reducers: the native 9.5 mm bore is reduced with the supplied inserts. Choose the reducer that matches your motor shaft so the propeller seats concentrically and does not slip.

Weight: at about 18 g per propeller, the pair adds little rotating mass, which helps keep motor response crisp.

Rotation: the pack contains one CW and one CCW unit, so it covers a single motor position on a quadcopter or a similar multi-rotor layout.

Compatibility and Requirements

The propellers are designed for multi-copter use with a 9.5 mm bore and the included reducers for 3, 3.17, 4, 5, 6 and 8 mm shafts. No motor, frame or flight controller is included. Check that your motor shaft diameter matches one of the reducer sizes and that your airframe has clearance for an 8-inch propeller before fitting.

Typical Uses

These propellers suit DIY multi-copter builds, routine replacement of damaged blades, and keeping a spare matched pair on hand. The CW/CCW pairing makes them straightforward to fit on a single arm without needing to buy two separate packs.

What's in the Box

  • 1 x Counter-clockwise (CCW) 8045 propeller
  • 1 x Clockwise (CW) 8045 propeller
  • 1 set of plastic reducers (3, 3.17, 4, 5, 6 and 8 mm)

Quick specs

Prop. Diameter (inch)
8
Material
ABS
Color
Black
Rotation Direction
CCW, CW
Rotation
1CW+1CCW
No. of Blades
2
See all specifications

More from Pro-Range

View all →

Related Products

View all →