
1 / 4 · Click to enlarge
AI Summary
The Pro-Range Starter Kit for Arduino Nano bundles a Nano V3.0 board, breadboard, jumper wires, displays, sensors and more in one box. It gives you a ready-to-use component set for learning coding and building electronics projects.
Key Highlights
- Includes Nano V3.0 CH340 board with ATmega328P
- 830-point solderless breadboard and 65 flexible jumper wires
- Displays: 7-segment LEDs, 8x8 dot matrix, and 3-colour LED module
- Sensors: IR receiver, LDR, vibration switch, and temperature sensor
- Assorted resistors, buttons, buzzers, and potentiometer
- Comes in an eight-grid storage box for organisation
Ideal For
- Beginners learning Arduino programming and electronics
- Students working on embedded systems projects
- Hobbyists prototyping with the Arduino Nano
- Makers who want a ready supply of common components
- Educators looking for a classroom kit
Buying Tip
Check that your computer can install CH340 drivers, as the included Nano V3.0 board uses this USB-to-serial chip and may require a driver for programming.
Elecvora expert review
Our verdict
The Pro-Range Starter Kit for Arduino Nano offers a well-rounded set of components for anyone starting with embedded electronics. It covers the essentials for learning and prototyping, though some users may need to supply their own batteries and install drivers.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Includes a wide variety of components for many projects
- Comes with a Nano V3.0 board and breadboard for immediate use
- Organised storage box keeps parts tidy
- No soldering required for breadboard prototyping
Cons
- Batteries for the battery holder are not included
- CH340 driver may need to be installed manually on some systems
- No detailed project guide is mentioned in the package contents
Best for
Beginners and students learning Arduino Nano programming and electronics
Not ideal for
Advanced users needing specialised or high-precision components
Specifications
| Item Type | Kit |
|---|---|
| Compatibility | Arduino Nano |
| Width (mm) | 120 |
| Weight (g) | 310 |
| Shipping Weight | 0.32 kg |
| Shipping Dimensions | 19.5 × 13 × 4.7 cm |
What's in the box
- 1x Nano V3.0 CH340 board (ATmega328P)
- 1x 830-point solderless breadboard
- 1x 65-piece flexible breadboard jumper wire set
- 1x IR remote control with battery
- 1x USB 2.0 A-B male printer cable (0.5 m)
- 1x DIP 3-colour LED module
- 2x 0.56-inch red 1-digit 7-segment LED display (10-pin)
- 1x 0.56-inch red 4-digit 7-segment LED display (12-pin)
- 1x 8x8 red 64-LED dot matrix display (3 mm CA)
- 5x 12x12x7.3 mm tactile push button switches (square)
- 5x round caps for square tactile switches
- 1x 10K potentiometer (15 mm shaft)
- 1x 6x AA battery holder box (with DC, without cover)
- 1x eight-grid storage box (19.5 × 12.7 × 4.5 cm)
- 15x 28 mm leg LED 5 mm (red, yellow, green – 5 each)
- 1x 5 mm 940 nm infrared receiver LED (flame sensor)
- 3x 5 mm 5528 LDR light-dependent resistors
- 1x 1838B IR receiving head
- 1x 5V active buzzer
- 1x 5V passive buzzer
- 2x SW-520D vibration sensor metal ball tilt switches
- 10x 1K 1/4W 1% resistors
- 10x 10K 1/4W 1% resistors
- 10x 220R 1/4W 1% resistors
- 1x LM35DZ temperature sensor
- 1x 74HC595N shift register
Frequently Asked Questions
What is included in the Pro-Range Starter Kit for Arduino Nano?
Do I need to install drivers for the Nano board?
Can I use this kit with a different Arduino board?
What power source does the kit use?
Is soldering required for the projects?
How should I store the components?
Overview
The Pro-Range Starter Kit for Arduino Nano is an all-in-one component pack for learning embedded systems and Arduino programming. It centres on the Nano V3.0 CH340 board and includes a broad selection of parts that cover basic to intermediate projects. Whether you are new to electronics or looking to expand your parts collection, this kit saves time by providing many commonly used components in a single package.
Key Features
- Nano V3.0 CH340 board with ATmega328P microcontroller for Arduino-compatible projects.
- 830-point solderless breadboard and 65 flexible jumper wires for quick, solder-free prototyping.
- Displays and indicators: 3-colour LED module, two 1-digit 7-segment displays, one 4-digit 7-segment display, and an 8x8 red dot matrix.
- Input and sensor components: IR remote and receiver, LDR light sensors, vibration tilt switches, and an LM35DZ temperature sensor.
- Output and control parts: active and passive buzzers, tactile push buttons with caps, a 10K potentiometer, and a 74HC595N shift register.
- Passive components: 1K, 10K, and 220R resistors (10 pieces each).
- Power and storage: 6x AA battery holder (no cover) and an eight-grid box for keeping parts organised.
Specifications Explained
The kit is designed for compatibility with Arduino Nano boards, and the included Nano V3.0 uses the CH340 USB-to-serial chip, which may require a driver on some operating systems. The 830-point breadboard offers plenty of space for building circuits with multiple components, while the 65 flexible jumper wires make connections neat and reliable. The 120 mm width and 310 g weight indicate a compact, portable kit that is easy to store or carry. The eight-grid box measures 19.5 × 12.7 × 4.5 cm and helps keep small parts sorted.
Compatibility and Requirements
This kit is built around the Arduino Nano form factor. The included Nano V3.0 CH340 board is compatible with the Arduino IDE, but you may need to install CH340 drivers depending on your computer's operating system. A USB 2.0 A-B male printer cable (0.5 m) is provided for connecting the board to a computer. The 6x AA battery holder can be used for external power, but batteries are not included. No soldering is required for breadboard projects, though some components may need soldering for permanent builds.
Typical Uses
Use this kit to learn coding and electronics through hands-on projects such as LED blinking, button-controlled circuits, sensor reading, display driving, and simple automation. It is also suitable for classroom demonstrations, hobbyist prototyping, and self-paced learning. The variety of components allows you to experiment with digital and analogue inputs, outputs, and communication modules.
What's in the Box
- 1x Nano V3.0 CH340 board (ATmega328P)
- 1x 830-point solderless breadboard
- 1x 65-piece flexible breadboard jumper wire set
- 1x IR remote control with battery
- 1x USB 2.0 A-B male printer cable (0.5 m)
- 1x DIP 3-colour LED module
- 2x 0.56-inch red 1-digit 7-segment LED display (10-pin)
- 1x 0.56-inch red 4-digit 7-segment LED display (12-pin)
- 1x 8x8 red 64-LED dot matrix display (3 mm CA)
- 5x 12x12x7.3 mm tactile push button switches (square)
- 5x round caps for square tactile switches
- 1x 10K potentiometer (15 mm shaft)
- 1x 6x AA battery holder box (with DC, without cover)
- 1x eight-grid storage box (19.5 × 12.7 × 4.5 cm)
- 15x 28 mm leg LED 5 mm (red, yellow, green – 5 each)
- 1x 5 mm 940 nm infrared receiver LED (flame sensor)
- 3x 5 mm 5528 LDR light-dependent resistors
- 1x 1838B IR receiving head
- 1x 5V active buzzer
- 1x 5V passive buzzer
- 2x SW-520D vibration sensor metal ball tilt switches
- 10x 1K 1/4W 1% resistors
- 10x 10K 1/4W 1% resistors
- 10x 220R 1/4W 1% resistors
- 1x LM35DZ temperature sensor
- 1x 74HC595N shift register
Quick specs
- Item Type
- Kit
- Compatibility
- Arduino Nano
- Width (mm)
- 120
- Weight (g)
- 310
- Shipping Weight
- 0.32 kg
- Shipping Dimensions
- 19.5 × 13 × 4.7 cm


















