Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

An Uno R3 compatible board with an ATmega328, supplied with a USB cable and a transparent acrylic case. It gives you 14 digital I/O pins, six analog inputs and 5V operation for quick prototyping.

Key Highlights

  • Uno R3 compatible board based on the ATmega328 microcontroller
  • 14 digital I/O pins, six of them PWM capable
  • Six analog input channels for sensors and readings
  • 16 MHz clock speed with 32 KB flash and 2 KB SRAM
  • Transparent acrylic case protects the board while showing its layout
  • USB-A to USB-B cable included for power and programming

Ideal For

  • Students learning microcontroller programming for the first time
  • Hobbyists prototyping sensor and LED projects
  • Makers who want a spare Uno-format board on the bench
  • Teachers setting up shared classroom electronics kits
  • Anyone who needs a protected board for portable projects

Buying Tip

Check that your power source stays within 7-12V, since the 5V rail can become unstable below 7V and the regulator may overheat above 12V.

Elecvora expert review

Our verdict

A practical starter bundle that removes the usual hunt for a cable and enclosure. The board covers the core Uno feature set, and the clear case adds protection without hiding the layout.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Cable and acrylic case included in one purchase
  • Standard Uno R3 pin layout with 14 digital and 6 analog pins
  • 6 PWM outputs and on-board TX, RX and pin 13 LEDs
  • Compact 75 x 54 x 12 mm board weighing about 26 g

Cons

  • No power adapter or battery included
  • Pin current limited to 40 mA, so motors need a driver
  • Unbranded board with no warranty information provided

Best for

Beginners and makers who want a ready-to-use Uno-format board with basic protection

Not ideal for

Projects needing high current outputs directly from the board pins

Specifications

Item TypeCase, Development Board
Board TypeUno
With Cable (Y/N)Y
Chip TypeATmega328
MicrocontrollerATmega328
Operating Voltage (VDC)5
Input Voltage (V)7-12V
Input Voltage (limit)6-20V
Analog I/O Pins6
Digital I/O Pins14 (of which 6 provide PWM output)
PWM Digital I/O Pins6
DC Current for 3.3V Pin(mA)50
DC Current per I/O Pin (mA)40
Clock Speed16 MHz
SRAM2
EEPROM1 KB (ATmega328)
Flash Memory32 KB
On Board LEDOn/Off, L (PIN 13), TX, RX
Dimensions (L x W x H) mm75 x 54 x 12
Weight (g)26
Shipping Weight0.12 kg
Shipping Dimensions15 × 8 × 5 cm

What's in the box

  • Uno R3 compatible development board
  • USB-A to USB-B cable
  • Transparent acrylic case for Uno R3

Frequently Asked Questions

What microcontroller does this board use?
It uses the ATmega328, running at a clock speed of 16 MHz.
How is the board powered?
It can be powered over USB or from an external supply of 7-12V through the power jack or the VIN and GND pins.
How many input and output pins are available?
There are 14 digital I/O pins, six of which provide PWM output, plus six analog input pins.
What is included in the package?
You receive the Uno R3 compatible board, a USB-A to USB-B cable and a transparent acrylic case.
Can I power it from a battery?
Yes, battery leads can be connected to the GND and VIN headers, provided the voltage stays within the 6-20V limit and ideally between 7 and 12V.
How should I care for the board and case?
Keep the board dry, avoid exceeding the voltage and current limits, and handle the acrylic case carefully to prevent scratches or cracks.

Overview

This set combines an Uno R3 compatible development board, a USB-A to USB-B cable and a transparent acrylic case. The board uses the ATmega328 microcontroller and follows the familiar Uno layout, so the digital and analog headers sit where you would expect them. Because the cable and enclosure are included, you can unbox the board, fit it into the case and connect it to a computer without sourcing extra parts first.

Key Features

  • ATmega328 microcontroller running at 16 MHz
  • 14 digital input/output pins, six of which support PWM output
  • Six analog input pins for sensors and measurement
  • 32 KB flash memory, 2 KB SRAM and 1 KB EEPROM
  • On-board LEDs for power, pin 13 (L), TX and RX activity
  • Transparent acrylic case and USB cable supplied together

Specifications Explained

The 5V operating voltage matches the logic level used by most common sensors and modules, which keeps wiring simple. An external input of 7-12V is recommended through the power jack; below 7V the 5V rail may sag, and above 12V the regulator can overheat. Each I/O pin can supply up to 40 mA, and the 3.3V pin provides up to 50 mA, so small components can be powered directly while heavier loads need their own supply. Flash memory holds your sketch, SRAM is working memory while the program runs, and EEPROM retains small values after power-off. The board measures 75 x 54 x 12 mm and weighs about 26 g.

Compatibility and Requirements

The board is Uno R3 compatible and uses the ATmega328. Programming and power can come from the included USB cable connected to a computer, or from an external AC-to-DC adapter or battery within the stated voltage range. No additional software, adapter or battery is included in this set.

Typical Uses

Learning microcontroller basics, building sensor-driven prototypes, driving LEDs and small motors through suitable driver modules, reading analog inputs, and testing circuits before moving to a permanent build. The clear case is handy for classroom benches, shared workstations and projects that travel between locations.

What's in the Box

  • Uno R3 compatible development board
  • USB-A to USB-B cable
  • Transparent acrylic case for Uno R3
Arduino Uno R3 without Cable

Quick specs

Item Type
Case, Development Board
Board Type
Uno
With Cable (Y/N)
Y
Chip Type
ATmega328
Microcontroller
ATmega328
Operating Voltage (VDC)
5
See all specifications