Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This boards compatible with arduino is a good fit for makers, students and electronics hobbyists. Main specs: item type Development Board; board type Mega; with cable (y/n) Y. Check that your power source supplies 5 V before connecting it.

Key Highlights

  • Item Type: Development Board
  • Board Type: Mega
  • With Cable (Y/N): Y

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeDevelopment Board
Board TypeMega
With Cable (Y/N)Y
Chip TypeATmega328P
Operating Voltage (VDC)5 V
Input Voltage (V)7-12V
Input Voltage (limit)6-20V
Analog I/O Pins6
Digital I/O Pins14 (of which 6 provide PWM output)
PWM Digital I/O Pins6
DC Current for 3.3V Pin(mA)50 mA
DC Current per I/O Pin (mA)40 mA
Clock Speed16 MHz
SRAM2 KB (ATmega328)
EEPROM1 KB (ATmega328)
Flash Memory32 KB (ATmega328) of which 0.5 KB used by bootloader
Power Supply OptionDC Jack or USB
On Board LEDOn/Off, L (PIN 13), TX, RX
Operating Temperature (°C)-40 to +90
Dimensions (L x W x H) mm75 x 54 x 12
Weight (g)26
Shipping Weight0.16 kg
Shipping Dimensions12 × 8 × 4 cm

Overview

The UNO R3 CH340G ATMega328P compatible with arduino + Cable is listed in our boards compatible with arduino range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Development Board
  • Board Type: Mega
  • With Cable (Y/N): Y
  • Chip Type: ATmega328P
  • Operating Voltage (VDC): 5 V (match this to your power supply; too high a voltage can damage the part)
  • Input Voltage (V): 7-12V (match this to your power supply; too high a voltage can damage the part)
  • Input Voltage (limit): 6-20V (match this to your power supply; too high a voltage can damage the part)
  • Analog I/O Pins: 6

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is UNO R3 CH340G ATMega328P compatible with Arduino + Cable  For Uno R3. A basic Arduino kit with all the components included eliminating the time our customers for finding and buying Arduino ant its basic accessories.

Uno R3 CH340G ATmega328p Development Board is the low-cost version of the popular Uno R3 Arduino. It is assembled with the CH340 USB to Serial converter chip, instead of using an Atmega16U2 chip.

We have used plenty of these low-cost Arduino boards with CH340 chips, and have found them to work perfectly. The only time the CH340 chip is used is during programming and when using the serial output of the USB port. During normal operation, this board is identical to the more expensive version without CH340 chip.

Main changes from the older version:

1. Two rows of the holes for the pins (Male and Female). So it can be connected with normal Female Jumpers. 2. Additional 3 rows of the holes for wiring. 3. Changes to the DIP package of ATMEGA328P to flat package. 4. CH340G replace ATmega16U2


Why Consider the Official Boards?
Feature Official Arduino Boards Clone Boards
Warranty ✅ 1-Year Official Warranty ❌ None / Limited
Build Quality ✅ High-Grade Components ⚠️ Varies
Software Support ✅ 100% Compatible ⚠️ May Face Issues
Firmware Updates ✅ Regular Official Releases ❌ Rare / None
Durability ✅ Long Lifespan & Support ⚠️ Shorter Life

How to use:

1. Download the IDE Arduino Link: http://arduino.cc/en/Main/Software (Copy to open) 2. Download the USB chip driver Link: http://www.5v.ru/zip/ch341ser.zip (Copy to open) 3. Plug in UNO development board, the driver will be installed automatically 4. Select the UNO from the die 5. Select the COM port 6. The best choice first, Arduino comes with routine procedures, burn into it.

Note: If you are getting the error while uploading the code in the Arduino Uno or not detecting the port need to upload the bootloader.

Specifications and Features :

  1. UNO R3 Arduino CH340G
    1. Microcontroller ATmega328 (SMD) - Interface CH340G
    2. Operating Voltage: 5V
    3. Input Voltage (recommended): 7-12V
    4. Input Voltage (limits): 5-20V
    5. Digital I / O Pins 14 (of which 6 provide PWM output)
    6. Analog Input Pins: 6
    7. DC Current per I Pin: 40 mA
    8. DC Current for 3.3V Pin: 50 mA
    9. Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
    10. SRAM: 2 KB (ATmega328)
    11. EEPROM: 1 KB (ATmega328)
    12. Clock Speed: 16 MHz
  2. Cable for UNO Arduino:
    1. Length 1 foot
    2. Hot Pluggable.
    3. Fully compatible with the PC.
    4. Molded strain relief and PVC overmolding to ensure a lifetime of error-free data transmissions.
    5. Aluminum under-mold shield helps meet FCC requirements on KMI/RFI interference.
    6. Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
    7. For Error-Free High-Performance Transmission.

Package Includes :

1 x UNO R3 Arduino. 1 x Cable for UNO.

Quick specs

Item Type
Development Board
Board Type
Mega
With Cable (Y/N)
Y
Chip Type
ATmega328P
Operating Voltage (VDC)
5 V
Input Voltage (V)
7-12V
See all specifications