Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 150W AC-DC buck converter module converts 100-240V AC to 24V DC at up to 6A. It features built-in overload, overcurrent, and short circuit protection for safe, reliable power in industrial and DIY applications.

Key Highlights

  • Converts 100-240V AC to 24V DC at up to 6A
  • 150W maximum output power
  • Overload, overcurrent, and short circuit protection
  • Double-sided PCB with two heat sinks
  • Compact 115mm x 65mm module, 200g weight
  • Mounting holes at 10.5cm and 5.5cm pitch

Ideal For

  • Industrial control system builders
  • DIY electronics enthusiasts
  • Automation and robotics hobbyists
  • LED lighting installers
  • Repair technicians needing a 24V supply

Buying Tip

Ensure your load does not exceed 6A continuously, and provide adequate ventilation or heatsinking if operating near full load for extended periods.

Elecvora expert review

Our verdict

This 150W AC-DC buck converter offers a practical solution for converting mains power to 24V DC in industrial and DIY settings. Its protection features and thermal design make it a reliable choice for moderate loads.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide 100-240V AC input range
  • Built-in overload, overcurrent, and short circuit protection
  • Dual heat sinks for improved heat dissipation
  • Compact size with standard mounting holes

Cons

  • Requires wiring and basic electrical knowledge
  • No enclosure or terminal covers included
  • Not a plug-and-play adapter

Best for

Industrial control panels and DIY electronics projects needing a 24V DC supply

Not ideal for

Users without electrical experience or those needing a finished plug-in adapter

Specifications

Output Voltage24
Output Current (A)6
Output Power (W)150
Input Voltage (V)AC 100 to 240
Frequency (Hz)50
Overload ProtectionYes
Overcurrent protectionYes
Short circuit protectionYes
Mounting Hole PCD (mm)10.5 cm and 5.5 cm
Length (mm)115
Width (mm)65
Weight (g)200
Shipping Weight0.21 kg
Shipping Dimensions12 × 7 × 4 cm

What's in the box

  • 1 x 150W AC-DC Buck Converter module

Frequently Asked Questions

What is the input voltage range of this module?
The module accepts AC input from 100V to 240V at 50Hz.
What is the maximum output current?
It provides up to 6A at 24V DC, for a maximum output power of 150W.
Does it have short circuit protection?
Yes, it includes short circuit protection along with overload and overcurrent protection.
What are the dimensions and weight?
The module measures 115mm in length and 65mm in width, and weighs 200g.
What is included in the package?
The package includes one 150W AC-DC Buck Converter module.
Can I use this module outdoors?
The module is not specified for outdoor use; it should be installed in a dry, protected environment.

Overview

The 150W AC-DC Buck Converter is a compact power supply module that converts a wide AC input range of 100-240V into a regulated 24V DC output, delivering up to 6A. It is designed for integration into industrial control systems, DIY electronics, and automation setups where a reliable 24V rail is needed. The module uses a double-sided PCB and includes two heat sinks to help manage heat during operation. Built-in protection features cover overload, overcurrent, and short circuit conditions, helping to protect both the module and downstream devices.

Key Features

  • Wide AC input: Accepts 100-240V AC at 50Hz, suitable for mains supplies in many regions.
  • Stable 24V output: Provides up to 6A (150W) for powering relays, sensors, motors, and control circuits.
  • Protection circuitry: Overload, overcurrent, and short circuit protection help prevent damage from faults.
  • Thermal design: Two heat sinks and a double-sided PCB assist with heat dissipation.
  • Mounting holes: Pre-drilled holes at 10.5cm and 5.5cm pitch simplify installation.

Specifications Explained

The input voltage range of 100-240V AC means the module can be used with standard mains power in the US, UK, EU, Australia, and many other regions. The 24V DC output at 6A provides 150W of power, enough for moderate loads such as industrial control panels, LED lighting strips, or small motors. The 50Hz frequency rating indicates compatibility with common AC supplies. Overload, overcurrent, and short circuit protection automatically limit or cut output if a fault occurs, reducing the risk of damage. The module measures 115mm in length and 65mm in width, weighs 200g, and has mounting holes at 10.5cm and 5.5cm pitch for secure fixing.

Compatibility and Requirements

This module requires a 100-240V AC mains source and provides a 24V DC output. It is not a complete adapter with a plug; wiring is necessary for both input and output. Users should have basic electrical knowledge and follow local safety regulations when connecting to mains power. The module is suitable for integration into enclosures or panels using the mounting holes. No additional components are included beyond the module itself.

Typical Uses

Common applications include powering industrial control equipment, automation systems, DIY electronics projects, LED lighting, and small DC motors. It can also be used in prototyping and repair work where a reliable 24V supply is required.

What's in the Box

1 x 150W AC-DC Buck Converter module.

Quick specs

Output Voltage
24
Output Current (A)
6
Output Power (W)
150
Input Voltage (V)
AC 100 to 240
Frequency (Hz)
50
Overload Protection
Yes
See all specifications