Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact adjustable step-up module that converts 10-32V input to a settable 12-35V output at up to 6A and 100W. Its multi-turn potentiometer and onboard power LED make it easy to dial in a stable higher voltage for car and DIY electronics projects.

Key Highlights

  • Adjustable output from 12V to 35V via multi-turn potentiometer
  • Accepts 10-32V DC input for flexible source options
  • Rated 100W output power with 6A maximum operating current
  • Large toroidal inductor and dual heatsinks for heavy-duty use
  • Onboard LED indicates when input voltage is applied
  • Compact 65 x 47 mm board weighing approximately 65 g

Ideal For

  • Automotive DIY enthusiasts building 12V accessory power supplies
  • Makers needing an adjustable step-up rail for bench projects
  • Users powering laptops or notebooks from a car battery
  • Electronics hobbyists working with 18V or 24V device loads
  • Field and outdoor installs requiring a wide temperature range

Buying Tip

Set the output with a voltmeter before connecting any load, and double-check input polarity first since the board has no reverse polarity protection.

Elecvora expert review

Our verdict

A practical, well-built step-up module for the price, with useful heatsinking and a genuinely adjustable output. It rewards careful wiring, since protection features are absent.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Adjustable 12-35V output with a multi-turn potentiometer
  • Dual heatsinks and large toroidal inductor for sustained loads
  • Wide -40 to 90 °C operating range
  • Compact 65 x 47 mm footprint
  • Onboard LED confirms input power

Cons

  • No reverse polarity protection
  • No short circuit protection
  • Output must always exceed input voltage

Best for

Automotive and DIY projects needing an adjustable step-up DC rail

Not ideal for

Applications requiring isolated or protected power conversion

Specifications

Output Voltage12 to 35
Max. Operating Current (A)6
Output Power (W)100
Operating Temperature (°C)-40 to 90
No-Load Current (mA)25
Length (mm)65
Width (mm)47
Weight (g)65
Shipping Weight0.35 kg
Shipping Dimensions8 × 5.5 × 3 cm

What's in the box

  • 1 x 150W 10-32V to 12-35V 6A DC-DC Boost Converter Module

Frequently Asked Questions

Can the output be set lower than the input voltage?
No. This is a boost converter, so the output must always be higher than the input. With a 12V input, the usable adjustment range starts around 14V.
What is the maximum load I can connect?
The module is rated for 6A maximum operating current and 100W output power. Stay within both limits, and keep in mind that the achievable combination depends on input voltage and cooling.
Does it protect against reversed input polarity?
No. There is no reverse polarity protection, so a diode in series with the input is recommended. For high loads a diode may not be practical, so check polarity carefully.
Is short circuit protection included?
No, the module does not include short circuit protection. Take care to prevent overcurrent and protect the module from accidental shorts.
How do I set the output voltage?
Apply input power with no load connected, then turn the multi-turn potentiometer while measuring the OUT+ and OUT- terminals with a voltmeter until you reach your target voltage.
What is included in the package?
The package contains one 150W 10-32V to 12-35V 6A DC-DC boost converter module. The standoff shown in product images is discontinued by the supplier.

Overview

This Elecvora DC-DC boost converter is a non-isolated step-up module designed to take a DC input between 10V and 32V and raise it to an adjustable output between 12V and 35V. Output is set with an onboard multi-turn potentiometer, and the screw terminals marked OUT+ and OUT- accept your load wiring. An LED lights up as soon as input voltage is present, giving a quick visual check before you connect anything valuable.

The board is built for reasonably demanding work, with a large toroidal inductor and dual heatsinks. It measures 65 x 47 mm and weighs around 65 g, so it fits into compact enclosures and vehicle installations without much fuss.

Key Features

  • Non-isolated step-up conversion from 10-32V input to 12-35V output
  • Multi-turn potentiometer for fine output voltage adjustment
  • Rated 100W output power and 6A maximum operating current
  • Onboard LED power indicator
  • Dual heatsinks and large toroidal inductor
  • Screw terminals for input and output connections

Specifications Explained

Output voltage (12-35V): The output must always be set higher than the input, since this is a boost topology. With a 12V source you can adjust upward from roughly 14V to 35V.

Current and power (6A, 100W): The 6A figure is the maximum operating current and 100W is the rated output power. In practice, the achievable combination depends on input voltage and heatsinking, so plan your load within these limits rather than at both maxima at once.

No-load current (25 mA): The board draws a small standby current even with nothing connected, which matters for battery-powered installations.

Operating temperature (-40 to 90 °C): The module is specified for a wide temperature range, making it suitable for outdoor and automotive environments.

Compatibility and Requirements

The converter needs a DC source within 10-32V and a load that accepts 12-35V at no more than 6A. There is no reverse polarity protection and no short circuit protection, so confirm input polarity before powering up. A diode in series with the input is recommended for protection, though for high loads this may not be practical. Always set the output voltage with a voltmeter before connecting your equipment.

Typical Uses

  • DIY adjustable vehicle power supply from a 12V source
  • Car-based laptop power, for example boosting 12V to 19V
  • Boosting 12V to 18V or 24V for devices needing a higher rail
  • General electronics projects requiring a step-up DC rail

What's in the Box

1 x 150W 10-32V to 12-35V 6A DC-DC Boost Converter Module. Note that the standoff shown in product images is discontinued by the supplier.

Quick specs

Output Voltage
12 to 35
Max. Operating Current (A)
6
Output Power (W)
100
Operating Temperature (°C)
-40 to 90
No-Load Current (mA)
25
Length (mm)
65
See all specifications