
1 / 5 · Click to enlarge
AI Summary
A compact adjustable DC-DC buck converter that accepts 5-23V input and outputs 0-16.5V at up to 3A peak. Its dual STN LCD shows voltage and current together, and the push-button setting plus protective case make it easy to use.
Key Highlights
- Dual STN LCD shows output voltage and current simultaneously
- Adjustable output from 0V to 16.5V via tactile push button
- 5-23V input range with up to 3A peak current
- Up to 95% conversion efficiency and 0.01 display resolution
- Automatic saving of the last set output voltage
- Supplied with a protective outer case for portable use
Ideal For
- Hobbyists building low-voltage electronics projects
- Repair technicians testing circuits at set voltages
- Students learning about DC-DC regulation
- Makers needing a small adjustable bench supply
- Users powering sensors, LEDs and small motors from a higher rail
Buying Tip
Keep your load under 2A for continuous use and add a heatsink if you regularly approach the 3A peak rating.
Elecvora expert review
Our verdict
A tidy, practical buck converter for low-power work, with the dual display and push-button control making setup quicker than a bare potentiometer board. It is best treated as a 2A-class module in continuous use despite the 3A peak rating.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Dual LCD shows voltage and current at once
- Push-button adjustment with saved setting
- Protective case included
- Up to 95% efficiency and 0.01 resolution
Cons
- 3A is a peak rating; 2A is recommended continuously
- Input must exceed output by at least 1V
- No heatsink included for higher-current use
Best for
Hobby and bench projects needing a small adjustable regulated supply
Not ideal for
Sustained high-current loads near 3A without added cooling
Specifications
| Model No. / Name | Buck Converter Module |
|---|---|
| Material | electrical components |
| Converter Type | DC-DC |
| Input Voltage (V) | 5 to 23V |
| Output Voltage | 0V to 16.5V |
| LCD Size(mm) | approx. 37.5 x 17.0 mm |
| Accuracy | 0.01 |
| Load Regulation | <= 0.8% |
| Peak Current (A) | 3 |
| Display Module | STN LCD |
| Motherboard Size | approx. 50 x 30 x 12 mm |
| Conversion efficiency | 0.95 |
| Voltage regulation (U) | 0.008 |
| Shipping Weight | 0.043 kg |
| Shipping Dimensions | 9 × 7 × 1 cm |
What's in the box
- 1 x Dual Display 3A DC-DC 5-23V to 0-16.5V Step-Down Buck Converter with Case
Frequently Asked Questions
What input voltage does this converter need?
Can I adjust the output current?
What is the maximum output current?
Does it remember the voltage I set?
What is included with the module?
How do I read the display?
Overview
This DC-DC step-down buck converter is a compact adjustable regulator for projects that need a stable, lower voltage from a higher supply. It accepts an input between 5V and 23V and produces an output that can be set anywhere from 0V to 16.5V. The dual STN LCD panel reports output voltage and current at the same time, which removes the need to connect a separate meter during setup or testing.
Instead of a screw potentiometer, voltage is adjusted with an on-board tactile push button. The module remembers the last voltage you set, so it returns to that value the next time it is powered up. A protective case is included, giving the board a tidier, more durable form than a bare PCB.
Key Features
- Dual display: STN LCD shows voltage and current together.
- Wide input range: 5V to 23V DC input.
- Adjustable output: 0V to 16.5V, set by push button.
- Current capability: 3A peak, with 2A recommended for continuous use.
- Efficiency: up to 95% conversion efficiency.
- Settings memory: last output voltage is saved automatically.
- Protective case: included to shield the module in use.
Specifications Explained
The input range of 5V to 23V covers common hobby supplies, battery packs and adapter rails. The output must stay at least 1V below the input, so a 12V input cannot be used to produce a 12V output; plan for that minimum difference. The 3A figure is a peak rating, and the manufacturer recommends staying within 2A during normal operation. Above 2A, heat rises quickly and a separate heatsink is needed.
Display resolution is 0.01, so small voltage changes are visible on screen. Load regulation is specified at 0.8% or better, and conversion efficiency reaches up to 95%, which keeps wasted heat low at moderate loads. The LCD measures roughly 37.5 x 17.0mm, and the main board is about 50 x 30 x 12mm.
Compatibility and Requirements
You need a DC input source within the 5V to 23V range and a load that draws no more than 3A peak, ideally 2A or less. The input voltage must be higher than the desired output by at least 1V. Output current is set by the load itself and is not adjustable on the module. For sustained current above 2A, add your own heatsink.
Typical Uses
Useful for powering low-voltage electronics from a higher supply rail, testing small circuits at a chosen voltage, running motors, LEDs or sensor boards, and as a small adjustable bench supply for hobby work. The cased design also makes it convenient to carry as a portable digital voltmeter and regulator combination.
What's in the Box
- 1 x Dual Display 3A DC-DC 5-23V to 0-16.5V Step-Down Buck Converter with Case
Quick specs
- Model No. / Name
- Buck Converter Module
- Material
- electrical components
- Converter Type
- DC-DC
- Input Voltage (V)
- 5 to 23V
- Output Voltage
- 0V to 16.5V
- LCD Size(mm)
- approx. 37.5 x 17.0 mm













