Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 4000W thyristor regulator that varies AC 220V output from 0V to 220V using a simple knob, letting you dim lights, slow fans or control heat. It comes pre-assembled in a shell with the potentiometer fitted, ready to wire in.

Key Highlights

  • 4000W maximum output for larger mains-powered appliances
  • Adjustable output from 0V to 220V via onboard knob
  • Two-way high-power thyristor rated for currents up to 40A
  • Works on 50Hz to 60Hz AC 220V input
  • Compact 85mm by 58mm body weighing 123g
  • Supplied in a protective shell with potentiometer and nut fitted

Ideal For

  • Hobbyists building mains-powered control projects
  • Repair technicians servicing heating and lighting appliances
  • Small workshops needing adjustable heat or motor speed
  • Makers adding dimming to lamps and fans
  • DIY users regulating electric irons and water heaters

Buying Tip

Check that your appliance runs on AC 220V and stays within 4000W, and lower the load if it is inductive or capacitive before relying on full-range adjustment.

Elecvora expert review

Our verdict

A practical, low-cost regulator for anyone who needs smooth manual control of a 220V load within 4000W. The pre-fitted shell and potentiometer make it quick to install, though users must respect the input voltage and load type limits.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple knob-based adjustment from 0V to 220V
  • High 4000W rating and 40A thyristor capacity
  • Comes assembled in a shell with the nut fitted
  • Compact size and light weight

Cons

  • Input is limited to AC 220V only
  • Inductive or capacitive loads must be run below full power
  • No digital display or preset memory

Best for

Manual dimming, speed and heat control of 220V appliances

Not ideal for

Low-voltage DC circuits or loads above 4000W

Specifications

Model No. / NameElectronic Regulator
Output Power (W)4000
Input Voltage (V)AC 220V
Additional Specs.Adjustable Voltage: AC 0V-220V
Frequency (Hz)50Hz ~ 60Hz
Width (mm)58
Weight (g)123
Length (mm)85
Shipping Weight1.2 kg
Shipping Dimensions10 × 10 × 5 cm

What's in the box

  • 1 x 4000W High-Power Thyristor Electronic Regulator with shell

Frequently Asked Questions

What voltage input does this regulator need?
It requires an AC 220V input and supports 50Hz to 60Hz mains frequency.
How much power can it control?
The rated output is 4000W, and the two-way thyristor handles currents up to 40A.
How do I adjust the output?
Turn the onboard potentiometer knob to set the output anywhere between 0V and 220V.
Can I use it with a fan or motor?
Yes, small motors and fans are among the intended uses, but reduce the load if it is inductive.
What is included with the regulator?
The package contains one 4000W thyristor electronic regulator with its shell.
Do I need to add any components?
No, the potentiometer and nut are already fitted, so no extra parts are required to operate it.

Overview

This electronic regulator uses a two-way high-power thyristor to vary the voltage delivered to an AC 220V appliance. With a rated output of 4000W and current handling up to 40A, it is built for loads such as lamps, fans, heating elements and small motors. The single potentiometer knob sets the output anywhere between 0V and 220V, giving you continuous rather than stepped control.

The module ships inside a protective shell with the potentiometer and its nut already in place, so you can wire it in without adding components. Its small footprint of 85mm by 58mm and 123g weight make it easy to fit into a project box, control panel or repair setup.

Key Features

  • Wide adjustment range: output can be set from 0V up to 220V.
  • High power handling: rated for appliances up to 4000W.
  • Two-way thyristor design: current capacity up to 40A helps manage low-resistance heating wires.
  • Mains frequency support: operates on 50Hz to 60Hz supplies.
  • Ready to mount: comes with a shell and fitted potentiometer nut.

Specifications Explained

Output power (4000W): this is the maximum load the regulator is intended to manage. Keep connected appliances within this figure, and reduce the load further if it is inductive or capacitive.

Input voltage (AC 220V): the module is designed for 220V mains input only. Confirm your supply matches before wiring.

Adjustable voltage (0V-220V): the knob sweeps the output across the full range, so you can fine-tune brightness, speed or heat rather than switching between fixed levels.

Frequency (50Hz-60Hz): the regulator works with either common mains frequency.

Size and weight: at 85mm long, 58mm wide and 123g, the unit is compact enough for tight installations.

Compatibility and Requirements

The regulator requires an AC 220V input and should be connected between the mains supply and the appliance you want to control. It is intended for loads within its 4000W rating. For inductive or capacitive loads, use a reduced power level. No additional components are needed to operate the fitted potentiometer.

Typical Uses

  • Dimming lamps and lighting circuits
  • Adjusting fan and small motor speed
  • Controlling the temperature of electric furnaces, water heaters and electric irons
  • Heat regulation in small workshops and repair benches

What's in the Box

  • 1 x 4000W High-Power Thyristor Electronic Regulator with shell

Quick specs

Model No. / Name
Electronic Regulator
Output Power (W)
4000
Input Voltage (V)
AC 220V
Additional Specs.
Adjustable Voltage: AC 0V-220V
Frequency (Hz)
50Hz ~ 60Hz
Width (mm)
58
See all specifications