Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact DC-DC buck module that converts an 8-55V DC input into a regulated 5V output at up to 2A. Its small 26 x 17.2 mm board fits easily into tight builds and enclosures.

Key Highlights

  • Wide 8-55V DC input range for flexible source options
  • Regulated 5V output at up to 2A total current
  • Compact 26 x 17.2 mm circuit board footprint
  • Step down buck topology for efficient voltage reduction
  • Suitable for hobby electronics, RC and FPV builds
  • Lightweight module at approximately 0.003 kg

Ideal For

  • Electronics hobbyists building custom 5V power rails
  • RC and FPV makers needing a compact step down board
  • Makers prototyping projects with higher-voltage DC sources
  • Technicians repairing or modifying small DC-powered devices
  • DIY enthusiasts comfortable with soldering circuit boards

Buying Tip

Confirm your load stays within the 2A output rating and that your DC source sits between 8V and 55V before wiring the module in.

Elecvora expert review

Our verdict

A practical, no-frills buck module for anyone who needs a compact regulated 5V rail from a higher DC voltage. Its wide 8-55V input range and small 26 x 17.2 mm board make it easy to fit into projects, provided you respect the 2A limit and wire it carefully.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide 8-55V input range suits many DC sources
  • Compact 26 x 17.2 mm footprint
  • Regulated 5V output at up to 2A
  • Very light at around 0.003 kg

Cons

  • Bare board requires soldering and wiring
  • Output current limited to 2A
  • No enclosure or connectors included

Best for

Hobbyists and makers needing a small regulated 5V supply board

Not ideal for

Users wanting a plug-and-play enclosed power adapter

Specifications

Input Voltage (V)8-55V
Output Voltage5V
Total Power Dissipation2A
Length (mm)26
Width (mm)17.2
Shipping Weight0.003 kg
Shipping Dimensions5 × 4 × 1 cm

What's in the box

  • 1 x DC 8-55V to 5V 2A Step Down Buck Module Regulated Power Supply Module

Frequently Asked Questions

What input voltage does this module accept?
It accepts a DC input between 8V and 55V. Do not exceed 55V or go below 8V at the input.
What is the output voltage and current?
The output is regulated at 5V and the module is rated for up to 2A total output current.
Can I use it to power a 5V device drawing 2A?
Yes, a 5V load drawing up to 2A is within the module's rating. Keep the total draw at or below 2A and check for heat during use.
Does it come with wires or connectors?
The package includes the buck module only. You will need to supply and solder your own wiring and connectors.
How big is the board?
The board measures 26 mm long and 17.2 mm wide, with a shipping weight of about 0.003 kg.
Do I need to solder to use it?
Yes, it is a bare circuit board module, so soldering or equivalent wiring work is required to make connections.

Overview

This Generic DC-DC step down buck module is a compact regulated power supply board designed to convert a DC input between 8V and 55V into a stable 5V output. It is built around a buck topology, which steps the voltage down rather than dissipating the difference as heat, and it can supply up to 2A at the output. At just 26 mm long and 17.2 mm wide, the board is small enough to tuck into enclosures, project boxes and RC builds where space is limited.

The module is a bare circuit board, so it is aimed at makers, hobbyists and technicians who are comfortable with soldering and basic DC wiring. It provides a simple way to create a 5V rail from a higher-voltage DC source within the stated input window.

Key Features

  • Wide input range: accepts 8V to 55V DC, covering many common DC supplies and battery packs within that window.
  • Regulated 5V output: provides a steady 5V rail for downstream electronics.
  • 2A current capability: supports loads drawing up to 2A total.
  • Compact dimensions: 26 x 17.2 mm board fits into tight spaces.
  • Lightweight: approximately 0.003 kg, adding negligible weight to a build.

Specifications Explained

Input voltage (8-55V): the module needs at least 8V at its input to operate and should not be fed more than 55V. Staying inside this range is essential for correct operation and long service life.

Output voltage (5V): the output is regulated at 5V, which suits many logic boards, sensors, small fans and other 5V devices.

Total power dissipation / current (2A): the module is rated for up to 2A of output current. Plan your load so the total draw stays within this figure, and remember that higher currents generate more heat.

Size (26 x 17.2 mm): the small footprint makes the board easy to place in compact layouts, and the low shipping weight of 0.003 kg keeps parcel costs down.

Compatibility and Requirements

This module is compatible with DC sources that fall within the 8V to 55V input range and with devices that require a regulated 5V supply drawing no more than 2A. It is a bare board, so you will need to solder or otherwise connect input and output wires yourself. Always confirm the polarity of your input and output connections before applying power, and check that your intended load does not exceed the 2A rating.

Typical Uses

  • Creating a 5V rail in hobby electronics and DIY projects
  • Powering 5V accessories from a higher-voltage DC source within the input range
  • RC and FPV builds that need a compact 5V supply board
  • Bench and prototyping setups where a small regulated module is handy

What's in the Box

1 x DC 8-55V to 5V 2A Step Down Buck Module Regulated Power Supply Module.

Quick specs

Input Voltage (V)
8-55V
Output Voltage
5V
Total Power Dissipation
2A
Length (mm)
26
Width (mm)
17.2
Shipping Weight
0.003 kg
See all specifications