
1 / 3 · Click to enlarge
AI Summary
A programmable step-down module that turns a 6-55 V DC input into an adjustable 0-50 V, 0-5 A output with LCD monitoring. It stores 10 preset groups so repeat voltage and current settings can be recalled quickly.
Key Highlights
- 6-55 V DC input with adjustable 0-50 V output
- Up to 5 A output current and 250 W maximum power
- Digital setting in 0.01 V and 0.001 A steps
- LCD shows voltage, current, power and output state
- Stores 10 preset groups with quick recall for two
- Compact 80 x 45 mm board weighing 86 g
Ideal For
- Electronics hobbyists building a adjustable bench supply
- Repair technicians testing circuits at controlled current
- Makers mounting a regulated supply inside an enclosure
- Students learning constant voltage and constant current behaviour
- Developers powering prototypes from a DC source
Buying Tip
Confirm your DC input stays above the output voltage you need, since this module steps voltage down only and cannot boost it.
Elecvora expert review
Our verdict
A practical programmable step-down module for anyone who wants digital voltage and current control with clear LCD feedback. Its preset memory and compact size make repeat testing quicker than dial-based supplies.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Fine 0.01 V and 0.001 A setting resolution
- 10 stored presets with quick recall
- Clear LCD status for voltage, current and power
- Compact 80 x 45 mm board for built-in use
Cons
- Step-down only, so output cannot exceed input
- Requires a separate DC input source and wiring
- No enclosure or accessories included
Best for
Bench testing and project power with controlled voltage and current
Not ideal for
Anyone needing a boost function or a complete plug-in supply
Specifications
| Output Current (mA) | 5000 |
|---|---|
| Output Power (W) | 250 |
| Model No. / Name | DP50V5A |
| Input Voltage (V) | 6 to 55 |
| Output Voltage | 0-50 |
| Length (mm) | 80 |
| Width (mm) | 45 |
| Weight (g) | 86 |
| Shipping Weight | 0.109 kg |
| Shipping Dimensions | 8 × 5 × 5 cm |
What's in the box
- 1 x DP50V5A Buck Adjustable DC Step-Down Programmable Power Supply Module
Frequently Asked Questions
What input voltage does the DP50V5A need?
What are the output voltage and current ranges?
Can it remember my settings?
What does the display show?
What is included with the module?
How should I power it safely?
Overview
The DP50V5A is a programmable DC step-down power supply module that combines analog power conversion with digital control. It takes a DC input between 6 V and 55 V and produces an adjustable output from 0 V to 50 V at up to 5 A, with a maximum output power of 250 W. Voltage and current are entered digitally, so settings can be repeated precisely instead of adjusted by feel.
The onboard LCD works as a voltmeter and ammeter, showing preset and live values for voltage, current and power. An output status area indicates whether output is active, whether the module is in constant voltage or constant current mode, and which stored data group is in use. Settings such as overvoltage, overcurrent, overpower and display brightness are adjusted on the setup screen.
Key Features
- Adjustable output from 0 V to 50 V in 0.01 V steps
- Current limit from 0 to 5.000 A in 0.001 A steps
- 10 preset groups stored in memory, with two recalled quickly
- LCD readout for preset and live voltage, current and power
- Output state indicators for constant voltage and constant current operation
- Small board format for standalone use or mounting inside equipment
Specifications Explained
Input and output range
The 6-55 V input accepts a wide range of DC sources. Because this is a step-down module, the output must remain below the input voltage, so plan the source accordingly when working near the top of the 0-50 V range.
Current and power
The 5 A current limit and 250 W power ceiling define the practical load. High voltage and high current together can exceed the power limit, so check both figures when setting a target.
Resolution
Fine 0.01 V and 0.001 A steps make it easier to match a required test voltage or a safe charging current without drifting between settings.
Compatibility and Requirements
A suitable DC input source within the 6-55 V range is required, along with wiring rated for the current you intend to draw. The module is a step-down converter only and cannot raise voltage above the input. No other accessories are confirmed in the product data.
Typical Uses
Bench testing circuits, powering prototypes at a set voltage, current-limited charging experiments, repair diagnostics and enclosure-mounted power for projects where a fixed adapter is unsuitable.
What's in the Box
- 1 x DP50V5A Buck Adjustable DC Step-Down Programmable Power Supply Module

Quick specs
- Output Current (mA)
- 5000
- Output Power (W)
- 250
- Model No. / Name
- DP50V5A
- Input Voltage (V)
- 6 to 55
- Output Voltage
- 0-50
- Length (mm)
- 80













