Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact adjustable DC-DC boost converter that lifts a 3V-35V input to a 4V-40V output at up to 12A and 80W. Screw terminals allow solder-free wiring, and efficiency reaches up to 95%.

Key Highlights

  • Adjustable output from 4V to 40V via onboard setting
  • Input range of 3V to 35V DC for flexible source choice
  • Up to 12A output current and 80W maximum load
  • Efficiency up to 95% for lower heat during conversion
  • Screw terminals for solder-free input and output wiring
  • Compact 38 x 32 mm board weighing about 17 g

Ideal For

  • Makers building adjustable bench power projects
  • Hobbyists working with 24V vehicle power
  • Technicians prototyping DC step-up circuits
  • Electronics students learning boost converter behaviour
  • DIY laptop power supply experimenters

Buying Tip

Set the output voltage before connecting your load, and confirm it stays above the input voltage since this is a boost-only module.

Elecvora expert review

Our verdict

A small, capable adjustable boost module with useful current headroom and solder-free terminals. It suits bench and hobby work well, provided you respect the boost-only behaviour and watch heat at high loads.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide 3V-35V input and 4V-40V output range
  • Up to 12A and 80W for its compact size
  • Screw terminals simplify wiring
  • Efficiency up to 95%

Cons

  • Boost only, so output must exceed input
  • No enclosure or mounting hardware included
  • High-load runs need attention to heat

Best for

Makers and technicians needing an adjustable raised DC rail

Not ideal for

Users wanting a buck converter or a fully enclosed plug-and-play supply

Specifications

Model No. / NameBoost Converter Module
Output Current (mA)12000
Output Voltage4 ~ 40
Efficiency0.95
Max Load80W
Operating Temperature (°C)-40 to 85
Length (mm)38
Width (mm)32
Weight (g)17
Shipping Weight0.02 kg
Shipping Dimensions3 × 2 × 2 cm

What's in the box

  • 1 x DC-DC 3V-35V to 4V-40V Adjustable Step Up Power Module High Power Boost Converter

Frequently Asked Questions

What input voltage does this module accept?
It accepts a DC input from 3V to 35V. Stay within that range to avoid damage.
What output voltage can I set?
The output is adjustable from 4V to 40V. As a boost converter, the output must be set above the input voltage.
How much current and power can it handle?
The module is rated for up to 12A output current and an 80W maximum load. Keep within both limits.
Do I need to solder the wires?
No soldering is needed at the connections. The IN and OUT screw terminals accept wires directly.
What is included with the module?
The package contains one boost converter module. No cables, enclosure or other accessories are included.
How should I handle heat during use?
Efficiency reaches up to 95%, but the module can still warm up at high current. Provide airflow and avoid running continuously at maximum load.

Overview

This generic DC-DC step up power module takes a DC input between 3V and 35V and converts it to an adjustable output between 4V and 40V. It is a boost converter, meaning the output voltage is raised above the input rather than lowered. With a rated output current of up to 12A, a maximum load of 80W and efficiency up to 95%, it packs a useful amount of conversion capability into a 38 x 32 mm board that weighs roughly 17 g.

Wiring is handled through screw terminals marked IN for input and OUT for output, so no soldering is required at the connection points. That makes the module convenient for bench work, prototyping and temporary setups where parts may be reused.

Key Features

  • Adjustable 4V to 40V output from a 3V to 35V DC input
  • High output current of up to 12A and 80W maximum load
  • Efficiency up to 95% for reduced losses
  • Low ripple design for steadier output
  • Screw terminals for solder-free input and output connections
  • Wide operating temperature range of -40 to 85°C

Specifications Explained

Voltage range

The 3V to 35V input window covers many common DC sources, while the 4V to 40V output range lets you dial in the rail your project needs. Because it is a boost topology, the output must be set above the input voltage for correct regulation.

Current and load

The 12000 mA (12A) output current figure and 80W maximum load describe the module's upper limits. In practice, heat rises as current increases, so keep an eye on temperature during long runs at high load.

Efficiency

Efficiency up to 95% means most of the input power reaches the output, which helps limit heat build-up compared with lower-efficiency converters.

Size and weight

At 38 mm long, 32 mm wide and about 17 g, the board fits into tight enclosures and small project boxes.

Compatibility and Requirements

The module needs a DC input within 3V to 35V and a load that stays within 12A and 80W. Output voltage is adjustable within 4V to 40V and must be set higher than the input for boost operation. Connections are made at the IN and OUT screw terminals. No other accessories are specified.

Typical Uses

  • Raising 24V vehicle power for accessory projects
  • Laptop power supply experiments
  • Bench prototyping where an adjustable raised rail is needed
  • General hobby and maker electronics builds

What's in the Box

One DC-DC 3V-35V to 4V-40V adjustable step up power module is included. No other items are supplied.

Quick specs

Model No. / Name
Boost Converter Module
Output Current (mA)
12000
Output Voltage
4 ~ 40
Efficiency
0.95
Max Load
80W
Operating Temperature (°C)
-40 to 85
See all specifications