
1 / 3 · Click to enlarge
At a glance
This (esc) drone speed controller is a good fit for makers, students and electronics hobbyists. Main specs: item type Motor Driver Module; power rating <170w; external nmos 4.
Key Highlights
- Item Type: Motor Driver Module
- Power Rating: <170w
- External NMOS: 4
Ideal For
- Robots and moving models
- Automation projects
- Replacement for a worn motor
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Motor Driver Module |
|---|---|
| Power Rating | <170w |
| No. of Inputs | 3 Inputs Lines |
| External NMOS | 4 |
| Shipping Weight | 0.025 kg |
| Shipping Dimensions | 13 × 7 × 3 cm |
Overview
The 170W High Power HBridge Motor Driver Module NMOS Brake Duty Cycle for DC 5-30V Motor 4 External NMOS Tubes Two PWM inputs is listed in our (esc) drone speed controller range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Motor Driver Module
- Power Rating: <170w
- No. of Inputs: 3 Inputs Lines
- External NMOS: 4
- Shipping Weight: 0.025 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 13 × 7 × 3 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The 170 W High-Power H-Bridge Motor Driver Module is engineered for high-current DC motor control from 5 V to 30 V. It employs four external low-Rds(on) NMOS power transistors to deliver up to 170 W output with high efficiency and low heat generation. Two independent PWM inputs allow forward/reverse speed control and dynamic braking via duty-cycle modulation. Integrated NMOS brake circuitry ensures rapid stop response and reduced motor back-EMF. The module supports continuous high-current operation, features logic-level control compatibility (typically 3.3 V/5 V), and provides stable bidirectional drive for robotics, automation, and high-power motion applications requiring precise speed and torque management.
Note : Actual product may vary in terms of design.
Features:
- Easy to use
- With full bridge driver chip + low resistance 55V110ANMOS, the motor can be turned forward and backward.
- Two PWM inputs, dutycycle regulated in 0-100%. Instant braking ability.
- The control is simple and convenient. Only 3 input lines are needed to control the motor
Package Includes:
1 x 170W High Power HBridge Motor Driver Module NMOS Brake Duty Cycle for DC 5-30V Motor 4 External NMOS Tubes Two PWM inputs
Quick specs
- Item Type
- Motor Driver Module
- Power Rating
- <170w
- No. of Inputs
- 3 Inputs Lines
- External NMOS
- 4
- Shipping Weight
- 0.025 kg
- Shipping Dimensions
- 13 × 7 × 3 cm













