Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This battery charger module is a good fit for makers, students and electronics hobbyists. Main specs: output voltage 5; output current (a) 1, 2; battery cell type 1S. Check that your power source supplies 5 before connecting it.

Key Highlights

  • Output Voltage: 5
  • Output Current (A): 1, 2
  • Battery cell type: 1S

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Output Voltage5
Output Current (A)1, 2
Battery cell type1S
Additional Specs.Micro USB input: 5V 1A
USB output voltage5V 2.1A / 5V 1A(Dual USB interface)
Battery Typeliquid lithium-ion batteries (18650) 3.7 lithium-ion battery only
Product Size57mm x 28mm
Screen Size (inch)27mm x 17mm
Shipping Weight0.01 kg
Shipping Dimensions8 × 6 × 1 cm

Overview

The 18650 5V 1A/2A Lithium, Battery Digital Display, Charging Module Dual, USB Output Band, Display Booster, Mmodule is listed in our battery charger module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Output Voltage: 5 (match this to your power supply; too high a voltage can damage the part)
  • Output Current (A): 1, 2 (your supply must deliver at least this much current)
  • Battery cell type: 1S (note the battery type so you can order spares or the right charger)
  • Additional Specs.: Micro USB input: 5V 1A
  • USB output voltage: 5V 2.1A / 5V 1A(Dual USB interface) (match this to your power supply; too high a voltage can damage the part)
  • Battery Type: liquid lithium-ion batteries (18650) 3.7 lithium-ion battery only (note the battery type so you can order spares or the right charger)
  • Product Size: 57mm x 28mm (measure your mounting space before ordering)
  • Screen Size (inch): 27mm x 17mm (measured diagonally; compare with the space you have before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Do you want to build your own power bank from your spare 18650 battery cells?  Then this 18650 5V 1A/2A Lithium Battery Digital Display Charging Module is for you. Just like a modern power bank the module is equipped with Dual USB output to charge the gadgets at 2.1A and 1A. To charge the batteries, this module has one MicroUSB input. Onboard, a brilliant blue-colored illuminating LED Display displays the real-time battery percentage in the 0–100% range, as well as the IN and OUT signals. Furthermore, the board contains a connection for installing an LED to be used as a flashlight, which is generally found on a POWER BANK. So, if you have any spare 18650 battery cells in your scrap box, buy this module create your own Power Bank, and then share your DIY experience with us.

Quick specs

Output Voltage
5
Output Current (A)
1, 2
Battery cell type
1S
Additional Specs.
Micro USB input: 5V 1A
USB output voltage
5V 2.1A / 5V 1A(Dual USB interface)
Battery Type
liquid lithium-ion batteries (18650) 3.7 lithium-ion battery only
See all specifications