
1 / 2 · Click to enlarge
At a glance
This battery charging boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Battery Charging Boost Module; input type Type-C Port or Solder Wire Input; charge voltage(v) 4.2V per cell. Check that your power source supplies 4.2V per cell before connecting it.
Key Highlights
- Item Type: Battery Charging Boost Module
- Input Type: Type-C Port or Solder Wire Input
- Charge Voltage(V): 4.2V per cell
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Battery Charging Boost Module |
|---|---|
| Input Type | Type-C Port or Solder Wire Input |
| Charge Voltage(V) | 4.2V per cell |
| Charging Power (W) | 15 |
| Input Interface | Type-C / Solder Pad |
| Batteries Required | 2S / 3S Lithium Battery(Battery Configuration) |
| Operating Mode | Charging / Boost Mode depending on input voltage |
| Length (mm) | 32 |
| Width (mm) | 18 |
| Weight (g) | 03 |
| Sensor Type | Strain Gauge Based Load Cell |
| Operating Voltage (V) | 2.7~5.5 |
| Dimensions (L x W x H) mm | 170 x 130 x 130 |
| Installation | Tool-Free, Easy Replacement |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 10 × 8 × 1 cm |
Overview
The Type-C 3S Lithium Battery Charging Boost Module is listed in our battery charging boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Battery Charging Boost Module (note the battery type so you can order spares or the right charger)
- Input Type: Type-C Port or Solder Wire Input (confirm your cable or board uses the same connector)
- Charge Voltage(V): 4.2V per cell (match this to your power supply; too high a voltage can damage the part)
- Charging Power (W): 15 (check which plug or cable it needs)
- Input Interface: Type-C / Solder Pad (confirm your cable or board uses the same connector)
- Batteries Required: 2S / 3S Lithium Battery(Battery Configuration) (note the battery type so you can order spares or the right charger)
- Operating Mode: Charging / Boost Mode depending on input voltage (check which plug or cable it needs)
- Length (mm): 32 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Type-C 3S Lithium Battery Charging Boost Module is a compact charging and boost solution designed for 2S or 3S 3.7V lithium battery packs. It supports Type-C fast-charging input and solder-pad input, allowing flexible integration into DIY electronics, portable devices, and battery-powered systems.
This module integrates boost charging and battery balancing, ensuring stable charging and improved battery life when used with series lithium batteries. With up to 94% charging efficiency and 15W synchronous boost power, it delivers efficient energy conversion in a compact size.
Users can adjust charging current through resistors, configure battery series mode, and utilize the built-in LED indicators for real-time charging status monitoring. Its small form factor makes it suitable for embedded battery systems, DIY battery packs, and compact electronic projects.
Features:
- Supports 2S and 3S lithium battery charging configurations
- Type-C fast charging input for improved charging efficiency
- 15W synchronous boost charging circuit
- Up to 94% charging efficiency
- Battery balancing support for series batteries
- Adjustable charging current via resistor configuration
- LED indicators for charging and fault status
- Compact PCB design suitable for embedded applications
Package Includes:
1 x Type-C 3S Lithium Battery Charging Boost ModuleQuick specs
- Item Type
- Battery Charging Boost Module
- Input Type
- Type-C Port or Solder Wire Input
- Charge Voltage(V)
- 4.2V per cell
- Charging Power (W)
- 15
- Input Interface
- Type-C / Solder Pad
- Batteries Required
- 2S / 3S Lithium Battery(Battery Configuration)













