
1 / 3 · Click to enlarge
AI Summary
A microprocessor-controlled smart charger for 12V and 24V lithium, LiFePO4 and lead-acid batteries, delivering up to 35A at 12V or 18A at 24V from a 100–240V AC supply. Its nine-stage charging routine plus activation and maintenance modes make it a practical all-round unit for workshop and vehicle battery care.
Key Highlights
- Dual output: 12V at up to 35A and 24V at up to 18A
- Nine-stage automatic charging across lithium, LiFePO4 and lead-acid
- Maximum 450W output from a 100–240V AC, 50/60Hz supply
- Battery activation and maintenance modes for weak or idle packs
- LCD screen shows charging status and the active mode
- Overload, short-circuit and reverse-polarity protection built in
Ideal For
- Workshop technicians servicing 12V and 24V vehicle batteries
- RV and boat owners maintaining house battery banks
- Solar backup system users with lithium, LiFePO4 or lead-acid packs
- Hobbyists and makers who need a multi-chemistry bench charger
- Anyone reviving weak or long-stored batteries
Buying Tip
Check your battery's voltage and chemistry first, then match the current setting to the pack size rather than always charging at the maximum 35A or 18A.
Elecvora expert review
Our verdict
The P35 covers a lot of ground for one unit: two voltages, three chemistries and selectable current up to 35A, all with a nine-stage routine and clear LCD feedback. It is a sensible choice for anyone who regularly works across different battery types rather than a single dedicated pack.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Handles 12V and 24V batteries in one unit
- Supports lithium, LiFePO4 and lead-acid
- Selectable current steps at both voltages
- Activation and maintenance modes for weak batteries
- Broad 100–240V AC input
Cons
- Maximum 18A at 24V, lower than the 12V figure
- Charging leads are alligator clamps only
- No battery or carry case included
Best for
Workshop, automotive, marine and solar battery maintenance across mixed chemistries
Not ideal for
Charging packs outside the 12V and 24V range or chemistries other than lithium, LiFePO4 and lead-acid
Specifications
| Item Type | Smart Battery Charger |
|---|---|
| Model No. / Name | P35 |
| Output Voltage | 12V / 24V |
| Output Current (A) | Max 35A (12V) / Max 18A (24V) |
| Power Supply Voltage (V) | 100–240V AC, 50/60Hz |
| Battery Type | Lead-acid, LiFePO4, Lithium |
| Output Power (W) | Max 450W |
| Length (mm) | 220 |
| Width (mm) | 120 |
| Weight (g) | 1000 |
| Shipping Weight | 1.775 kg |
| Shipping Dimensions | 27 × 28 × 14 cm |
What's in the box
- 1 x HTRC-P35 Smart Battery Charger
- 1 x Cable clip set (red and black alligator clamps)
- 1 x 3M power cord
- 1 x User manual
Frequently Asked Questions
Which battery chemistries can the HTRC P35 charge?
What current can it deliver?
What power supply does it need?
What is included with the charger?
Can it revive a battery that has been sitting unused?
What safety protections are built in?
Overview
The HTRC P35 is a smart battery charger for 12V and 24V packs in lithium, LiFePO4 and lead-acid chemistries. A microprocessor inside controls the whole charge cycle, so the unit adapts its behaviour to the battery connected rather than applying one fixed routine to everything. It runs from a standard 100–240V AC, 50/60Hz mains supply and produces a maximum of 450W at the output.
Current is selectable, giving you control over how quickly a pack is filled: up to 35A on 12V batteries and up to 18A on 24V batteries. The front LCD keeps charging status and the selected mode visible at a glance.
Key Features
- Nine-stage automatic charging for a controlled, precise fill that is easier on the battery.
- Three chemistries supported: lithium, LiFePO4 and lead-acid.
- Adjustable current: 10A, 20A or 35A at 12V; 5A, 10A or 18A at 24V.
- Activation and maintenance modes for reviving weak or long-idle batteries.
- Automatic voltage and temperature detection while charging.
- Protection suite: overload, short circuit and reverse polarity.
- Efficient cooling in a compact 220mm x 120mm body weighing around 1kg.
Specifications Explained
Output voltage and current. The P35 works with either 12V or 24V systems. At 12V it can push up to 35A, and at 24V up to 18A. Higher current fills a battery faster; lower current settings are gentler and useful for smaller packs.
Power. The 450W maximum output ceiling is what limits the current at each voltage, which is why the 24V figure is lower than the 12V figure.
Input. The 100–240V AC, 50/60Hz input means the charger can be used on mains power in a wide range of regions without a separate step-down converter.
Size and weight. At 220mm long, 120mm wide and roughly 1kg, the unit is compact enough to store on a shelf or carry between jobs.
Compatibility and Requirements
The P35 is intended for 12V and 24V batteries of the lithium, LiFePO4 and lead-acid types. It requires a 100–240V AC, 50/60Hz mains outlet. Charging leads are supplied as a red and black alligator clamp set, so batteries with suitable terminal posts can be connected directly.
Typical Uses
Because it handles both voltages and three chemistries, the P35 fits automotive work, RVs, boats and solar energy systems, as well as general workshop and industrial battery maintenance. The activation mode is particularly relevant where a battery has been sitting unused and needs to be brought back into rotation.
What's in the Box
- 1 x HTRC-P35 Smart Battery Charger
- 1 x Cable clip set (red and black alligator clamps)
- 1 x 3M power cord
- 1 x User manual



Quick specs
- Item Type
- Smart Battery Charger
- Model No. / Name
- P35
- Output Voltage
- 12V / 24V
- Output Current (A)
- Max 35A (12V) / Max 18A (24V)
- Power Supply Voltage (V)
- 100–240V AC, 50/60Hz
- Battery Type
- Lead-acid, LiFePO4, Lithium















